A driver for a ARM926EJ-S controller for the bme680

[AKL_for_STE]

Hello.

We try to evaluate the bme680 sensor. Bosch offers on the side: https://www.bosch-sensortec.com/bst/products/all_products/bsec support for different platforms.

Although we discovered, that there isn't any binary for our controller. We have a ARM926EJ-S controller, which belongs to the ARM9 family with a  armv5TEJ architecture without a floating point unit.

How can we evaluate the data from the bme680 with our controller?

[o_o]

Hi AKL_for_STE,

The ARM9 processor family is fairly old and currently not supported by BSEC. If you do not wish to upgrade your controller to a newer architecture, then I would recommend to look at running BSEC on another CPU from your system (in the cloud, for example).

I am not familiar with emulation options for this CPU architecture, but since the BSEC data rate is very low, and current consumption may not be a concern on your system emulating an ARMv6 (raspberry pi) via QEMU could be a solution.