Application Board 3.0 Bluetooth Connection

[yjseo]

How do I connect my application board 3.0 via bluetooth on the development desktop 2.0?

[BSTRobin]

Hello yjseo,

Application board 3.0 could be connected to Android app via bluetooth. See the application note: https://www.bosch-sensortec.com/media/boschsensortec/downloads/application_notes_1/bst-dhw-an012.pdf
Application board 3.0 could be connected to development destoop 2.0 via USB. See the user guide: https://www.bosch-sensortec.com/media/boschsensortec/downloads/software_tools/application_board_3_0/...

[yjseo]

I read the user guide but still doens't help. On the DD2.0 the only communication option available is via USB and no other option

[BSTRobin]

Hello yjseo,

Yes, DD2.0 only supported USB connection.

[TheTinker]

Hi there,

I have installed the Datalogger firmware using the USB-DFU bootloader as per as instruction: https://www.bosch-sensortec.com/media/boschsensortec/downloads/application_notes_1/bst-dhw-an012.pdf

After updating, the Status-LED of the board is blinking red. Besides that, I cannot connect the board with the Development Desktop 2.0 using USB. Which was possible before the update. Thanks!