08-06-2021 02:19 PM
the Niclas Sense ME documentation states that the pre-programmed firmware of the BHI260AP chip does not support the self-learning AI features yet. However, a different pre-built firmware called 'Klio' is available for the self-learning AI core.
Where can this firmware be downloaded?
Solved! Go to Solution.
08-06-2021 11:53 PM
Regarding this issue, you need to submit our contact form.
Please visit https://www.bosch-sensortec.com/about-us/contact/contact-form, and use the contact form to submit your request.
Please let me know if you have any questions.
08-26-2021 11:15 AM
now I finally have access to the firmware but I am still unable to upload it to the BHI260AP flash.
I followed the instructions on uploading firmware to the Nicla Sense ME using OTA via BLE in the beforementioned documentation. I can connect to the board but when I press "Upload" the connection status will change to "Disconnected" after ~ 1 min and the board wil not be visible until restarted. A progess bar appears but no progress is made.
Reading and configuring the sensors in the web interface works just fine. Also, I tried with Microsoft Edge and Google Chrome on both Windows 10 and Ubuntu. Using the built-in tools in the Arduino IDE for updating the NRF52 chip works as well, although uploading the NRF52 firmware via BLE leads to the same result as described above.
Could you please verify that firmware updates using OTA via BLE for the Nicla Sense ME as well as the BHI260AP work for you and hint me on what I did wrong?
08-27-2021 12:28 PM
Thanks for posting your concerns.
The guide regarding FW OTA for the BHI260AP and the Nicla has all been verified. One example video could be checked here: https://drive.google.com/file/d/17oIkQP_lUNV2PaburbtkCERfJxZSTcy7/view?usp=sharing
In my personal experience, it was observed some old PCs might get disconnected in the mid of the update, it also has to do with interferences etc.
In case, you can not update the FW OTA, another method has been added to the documentation, please look for: "Using the Sketches as a Step Stone / Agent", please let us know if this helps.
08-27-2021 03:53 PM
thank you for your help and updating the documentation.
The method "Using the Sketches as a Step Stone / Agent" worked perfectly fine for me.