BMA280 configuration failure after soft reset

[MarkPMendelsohn]

00> [00:00:00.009,918] <info> accel: BMA280 No Soft Reset Performed
00> [00:00:00.013,580] <info> accel: BMA280 reg 0x11 match 0x50 == 0x50
00> [00:00:00.014,129] <info> accel: BMA280 reg 0x12 match 0x60 == 0x60
00> [00:00:00.014,648] <info> accel: BMA280 reg 0x0F match 0x3 == 0x03
00> [00:00:00.017,272] <info> accel: BMA280 reg 0x10 match 0x9 == 0x09
00> [00:00:00.017,822] <info> accel: BMA280 reg 0x19 match 0x10 == 0x10
00> [00:00:00.018,371] <info> accel: BMA280 reg 0x1A match 0x20 == 0x20
00> [00:00:00.018,890] <info> accel: BMA280 reg 0x20 match 0x5 == 0x05
00> [00:00:00.019,439] <info> accel: BMA280 reg 0x2A match 0x5 == 0x05
00> [00:00:00.022,064] <info> accel: BMA280 reg 0x2B match 0x81 == 0x81
00> [00:00:00.022,583] <info> accel: BMA280 reg 0x3E match 0x80 == 0x80

[Minhwan]

Hello Mark, 

Firstly, all user configuration setting to be overwritten with their default value after softreset and the sensor goes to enter normal mode. 

Please check p44 in our datasheet. 

https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma280-ds000.pdf

And, if you want to use our FIFO, I'd like to use our reference example code as below url. 

https://github.com/BoschSensortec/BMA2-Sensor-API

Thank you.