I have a custom board with Texas Instruments' CC1310, I want to send this board's coordinates via RF with bma400's help. RF part is ok, there are files on github as reference but I want to know if there is an example code for TI MCU's. I want to move quickly that's why I need help about that topic. If there is no sample doc as I want, how can I adapt files on github to my project ?
Solved! Go to Solution.
I think i had the same issue and I want to post the solution in case someone else is having the same problem.
On the schematic of the BMA400 shuttle board flyer the pins are displayed like this:
and it seems like the pins of the BMA400 shuttle board are placed like this, because the pins are positioned the same:
But they are not. If you have a look on the shuttle board you can see that pin 1 of P1 and P2 are exactly on the opposite side. This means the pins are placed like this:
It took me some hours to get that because i did not imagine such a simple fault.