03-21-2023 08:19 AM
Hello
We are going to make a product using BMA456's Triple Tap.
However, while checking the function in Development Desktop 2.0, there is a case where the interrupt occurs twice in double tap and triple tap.
Is this normal?
Are the values I set wrong?
Accelerometer Setting | |
ODR | 200Hz |
Bandwidth | normal mode |
Filter Performance | Perfomance Optimized |
Range | 4g |
Solved! Go to Solution.
03-27-2023 05:59 AM
Hi brain_tom,
1.Tap can be used in both low-power and high-performance modes;
2.Less current costs in low-power modes;
3.Internal tap algorithm requires ODR(at least 200 Hz), otherwise it results in bad tap performance;
4.In theory, high-performance mode perform better better tap performance.
04-06-2023 02:18 AM
Thank you for your interest and explanation.
04-06-2023 03:25 AM
Welcome, brain_tom.