BME 680 BSEC for ESP32-S2

[AnthonyHE]

Do you plan to support the ESP32-S2 platforms on Arduino IDE with the BSEC library soon?

[Minhwan]

Send you private message. 

Thanks, 

[BSTRobin]

Hi SHarsany,

Please refer attached BSEC library for ESP32-S2.

[jcal]

I tried the uploaded file and that's what I get on my device:

ESP-ROM:esp32s2-rc4-20191025
Build:Oct 25 2019
rst:0x3 (RTC_SW_SYS_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x400266c5
SPIWP:0xee
mode:DIO, clock div:1
load:0x3ffe6100,len:0x524
load:0x4004c000,len:0xa70
load:0x40050000,len:0x298c
entry 0x4004c18c

BSEC library version 2.0.6.1
Timestamp [ms], IAQ, IAQ accuracy, Static IAQ, CO2 equivalent, breath VOC equivalent, raw temp[°C], pressure [hPa], raw relative humidity [%], gas [Ohm], Stab Status, run in status, comp temp[°C], comp humidity [%], gas percentage
Guru Meditation Error: Core  0 panic'ed (Double exception).

Core  0 register dump:
PC      : 0x40029dff  PS      : 0x00040536  A0      : 0x80085b80  A1      : 0x3ffca460
A2      : 0x00000001  A3      : 0x00000000  A4      : 0x00c800c8  A5      : 0x014000c8
A6      : 0x01400140  A7      : 0x00020005  A8      : 0x80082668  A9      : 0x3ffca2d0
A10     : 0x00000001  A11     : 0x00000005  A12     : 0x00000001  A13     : 0x00000005
A14     : 0x3ffca440  A15     : 0x00640064  SAR     : 0x00000014  EXCCAUSE: 0x00000002
EXCVADDR: 0xfffffff5  LBEG    : 0x00000001  LEND    : 0x00000005  LCOUNT  : 0x40028008


Backtrace: 0x40029dfc:0x3ffca460 0x40085b7d:0x7f800000 |<-CORRUPTED




ELF file SHA256: 77473eaa9dd867f4

Rebooting...

 Any chance BOSCH will update their Arduino library to support the ESP32S2?