11-23-2021 09:29 PM
Hi,
Looking to setup the BME 688 sensor and get readings. Have both the 8 sensor module (connected to a feather huzzah board) and 1 sensor board (connected to a stemm QT-py). Have plugged the 8 sensor module in but want to get real time data.
Tried to run the "basic.ino" example on both of these and the program compiles and loads but does not output any readings. It seems to get stuck somewhere when retreiving data.
From what I understood from the documentation, this basic.ino example should work on both BME 688 and 680 boards.
Wondering what else I might be missing?
Imported Libary into Arduino IDE: https://github.com/BoschSensortec/BSEC-Arduino-library/tree/master/examples
Thanks!
11-24-2021 03:40 AM
Hello mwy,
Do you use your own hardware board or reference HW board?
Do you run an unmodified example basic.ino?