08-04-2021 03:53 PM
I trained a neural net with AI Studio (Coffee or Air), exported it, and copied the exported files to the a new SD card, which I inserted in the dev-kit board.
However, after powering on, the App on the phone does not recognize any BLE devices. Anyway, I observed that data is recorded, because a new data file is created. The LED is blinking rapidly. What could be the problem?
Solved! Go to Solution.
08-04-2021 07:37 PM
If LED is blinking in fast, that means that it doesn't work properly.
To gather data for AI studio, please follow steps.
1) Insert battery coin in bme688 dev kit
2) Download AI studio and Dev kit software
3) Upgrade BME688 dev kit
4) Watch AI studio youtube clip
5) Before gathering data, please create bmeconfig file from AI studio and copy into SD card
08-05-2021 01:57 PM
As I wrote in my previous post, the training was successful, I wanted to do inference with the trained net by copying it to the SD card and using the Dev-Kit app.
However, in the meantime I solved the issue, location services had to be enabled on the phone.
08-05-2021 09:47 PM
Good to know 🙂