08-30-2021 09:46 AM
HI,
I created 2 AI models, one for coffee similar to the youtube video and one for foul vegetables. Both algorithms produce probabilities > 95%. I checked the configuration file output from AI Studio with 3 different applications: Arduino ESP32 (exact the ino example in BSEC 2.0), ESP32 in eclipse development environment and on a STM32 nucleo platform, all linked with libalgobsec.a (depending of the MCU used). In every test I get the result Gas Estimate 1 (normal air -> 1.0). Whatever I do I never get any probability > 0.0 in Gas Estimate 2, even if probe within the Coffee glas or in the fouled vegetable container. Any experience with BME688?
For sampling I used BME 688 dev kit board (8 sensors) on Adafruit HUZZAH32
BR
Solved! Go to Solution.
02-11-2022 02:54 PM
Thanks for the reply. But its not possible to access this video, please upload to youtube or so, then its possible for us to see. Thanks
02-16-2022 08:22 AM
Hello Falkenbergo,
You could refer the video in BME AI-Studio tool. See my previous reply.
05-08-2023 12:27 PM
Hello, I collected data using the BME688 Development Kit, then I trained and evaluated the algorithm and exported it as an .aiconfig file, similar to the video. Now, I want to connect the BME688 Dev kit board with the LoRa-E5 Development Kit (with STM32WLE5), using I2C to test the sensors with STM32. How do I integrate the .aiconfig file into my CubeIDE project?