is there a mean to reduce the delay between 2 bsec_sensor_control calls.
in my case the delay is almost acceptable for about 50 seconds ( 27ms between each call of bsec_sensor_control) , after that the delay for the next call will be 1min50s.
Solved! Go to Solution.
Are you using BSEC 2 right?
If you are developing based on BSEC 1, I'd like to recommend to use BSEC 2.
And, bsec_sensor_control is controlled by power mode. You can't control manually.
If you are using BSEC_SAMPLE_RATE_LP mode, it will be called every 3s. In case of BSEC_SAMPLE_RATE_ULP, it will be 300s.
If you want to call more frequently, there is high performance mode. BSEC_SAMPLE_RATE_HIGH_PERFORMANCE