I am trying to run the BSEC 2.0 example code with the arduino, on the Adafruit Esp32 feather board, with failure. There are some errors about the interface.h library, the error is shown in the attached image. I tried to change the platform.txt file but with no success until now.
Can anyone solve this error for this board?
Solved! Go to Solution.
I send you the example code used for BSEC 2.0. The code was provided by bosh, only with some modifications to make the communication between the board and the eight sensors (commMux).
All the libraries used were supplied by bosh, (https://www.bosch-sensortec.com/software-tools/software/bme688-software/?usr_ype=Private&email=ruico...) bsec 2.0 software, and the commMux in api integration example.