BME688 wrong temperatura and humidty

[BSTRobin]

Hi josemartinez,

Hardware: The heat source will affect the temperature and humidity. What about your hardware layout?

Software: 1. If you use BME680, you can use BSEC Orduino library(https://github.com/BoschSensortec/BSEC-Arduino-library ). If you use BME688, we suggest you use Bosch BSEC2 Library( https://github.com/BoschSensortec/Bosch-BSEC2-Library/blob/master/examples/generic_examples/basic_co...)

2. For your feedback "The problem is that temperature that is reading, the compensated one, is over 3 degrees up than the real and humidity is like a 60% lower. CO2 levels seems to be unrealistic too.", is your temperature and humidity value RAW data of BME688 or the temperature and humidity value output by BSEC?

[ilcnet]

the problem has been solved now after many tries and weeks, i used bsec2 library, with bsec library the sensor works reverse, thank you so much BSTRobin.

So after this, with sample bsec2 code the sensor after ever reboot tries to go to accuracy from 0 to 3 and the values not works until the sensor accuracy stable on the 1 level accuracy, so how i can fix this that the sensor works in stable mode after reboot, thanks

[mehran]

I have same issue on Nicla sense me. can i use this solution? should I program my board one time with  BSEC2 Library?
Sorry, i am new to arduino.

[josemartinez]

The hardware is a custom board that we have developed. I can't share you the whole design but sensor circuit is:

I'm testing BSEC2 library. After a few hours IAQ, VOC and CO2 values doesn't change and accuracy is still 0. How long it takes to calibrate? the temperature is still a little high and humidity lower.

I'm using compensated temperature and humidity not RAW.

15:39:36.326 -> BSEC outputs:
15:39:36.326 -> timestamp = 8409838
15:39:36.326 -> IAQ = 25.00
15:39:36.326 -> iaq accuracy = 0
15:39:36.361 -> CO2 = 500.00
15:39:36.361 -> bVOC = 0.50
15:39:36.361 -> temperature = 30.11
15:39:36.361 -> pressure = 101221.24
15:39:36.361 -> humidity = 31.55
15:39:36.361 -> gas resistance = 716835.81
15:39:36.361 -> compensated temperature = 27.11
15:39:36.361 -> compensated humidity = 37.38
15:39:36.361 -> Field Air probability : 99.87%
15:39:36.361 -> Hand sanitizer probability : 0.13%
15:39:36.361 -> gas index = 9.00
15:39:37.021 -> BSEC outputs:
15:39:37.056 -> timestamp = 8410538
15:39:37.056 -> temperature = 30.17
15:39:37.056 -> pressure = 101220.84
15:39:37.056 -> humidity = 31.42
15:39:37.056 -> gas resistance = 738550.31
15:39:37.056 -> gas index = 0.00
15:39:37.333 -> BSEC outputs:
15:39:37.333 -> timestamp = 8410818
15:39:37.333 -> temperature = 29.74
15:39:37.333 -> pressure = 101221.53
15:39:37.333 -> humidity = 31.30
15:39:37.333 -> gas resistance = 102400000.00
15:39:37.333 -> gas index = 1.00
15:39:38.726 -> BSEC outputs:
15:39:38.726 -> timestamp = 8412218
15:39:38.726 -> temperature = 28.95
15:39:38.726 -> pressure = 101213.50
15:39:38.726 -> humidity = 31.07
15:39:38.726 -> gas resistance = 102400000.00
15:39:38.726 -> gas index = 2.00
15:39:42.859 -> BSEC outputs:
15:39:42.859 -> timestamp = 8416348
15:39:42.859 -> temperature = 28.82
15:39:42.859 -> pressure = 101215.27
15:39:42.859 -> humidity = 31.19
15:39:42.859 -> gas resistance = 102400000.00
15:39:42.859 -> gas index = 3.00
15:39:43.556 -> BSEC outputs:
15:39:43.556 -> timestamp = 8417048
15:39:43.556 -> temperature = 29.41
15:39:43.556 -> pressure = 101217.29
15:39:43.556 -> humidity = 31.29
15:39:43.556 -> gas resistance = 7562428.00
15:39:43.556 -> gas index = 4.00
15:39:44.252 -> BSEC outputs:
15:39:44.252 -> timestamp = 8417748
15:39:44.252 -> temperature = 29.59
15:39:44.252 -> pressure = 101217.84
15:39:44.252 -> humidity = 31.31
15:39:44.252 -> gas resistance = 7423652.00
15:39:44.252 -> gas index = 5.00
15:39:44.915 -> BSEC outputs:
15:39:44.915 -> timestamp = 8418413
15:39:44.915 -> temperature = 29.66
15:39:44.915 -> pressure = 101217.39
15:39:44.915 -> humidity = 31.25
15:39:44.915 -> gas resistance = 7265632.00
15:39:44.915 -> gas index = 6.00
15:39:45.608 -> BSEC outputs:
15:39:45.608 -> timestamp = 8419113
15:39:45.608 -> temperature = 30.03
15:39:45.608 -> pressure = 101219.94
15:39:45.608 -> humidity = 31.21
15:39:45.608 -> gas resistance = 690725.13
15:39:45.608 -> gas index = 7.00
15:39:46.302 -> BSEC outputs:
15:39:46.302 -> timestamp = 8419813
15:39:46.302 -> temperature = 30.18
15:39:46.302 -> pressure = 101222.09
15:39:46.337 -> humidity = 31.15
15:39:46.337 -> gas resistance = 719859.38
15:39:46.337 -> gas index = 8.00
15:39:46.999 -> BSEC outputs:
15:39:46.999 -> timestamp = 8420513
15:39:46.999 -> IAQ = 25.00
15:39:47.034 -> iaq accuracy = 0
15:39:47.034 -> CO2 = 500.00
15:39:47.034 -> bVOC = 0.50
15:39:47.034 -> temperature = 30.26
15:39:47.034 -> pressure = 101218.89
15:39:47.034 -> humidity = 31.02
15:39:47.034 -> gas resistance = 739350.19
15:39:47.034 -> compensated temperature = 27.26
15:39:47.034 -> compensated humidity = 36.77
15:39:47.034 -> Field Air probability : 99.92%
15:39:47.034 -> Hand sanitizer probability : 0.08%
15:39:47.034 -> gas index = 9.00

I'm going to leave the sensor working a few days to test it. I'll update this post with the results.

Thank you for the answer.

[ilcnet]

I used adafruit Bme688 dev kit and with this code after 5 minutes the accuracy changed from 0 to 1 and values working well, but for real using in a product i need to use sensor with 1 accuracy and i don't want to stay 5 minutes to calibration after any reboot.