BME688 x8 board example (BME688 dev kit) code running

[Minhwan]

Hello all, 

I saw several posts in terms of BME 688 example in BME688 x8 board, and here is the quick guide how to do it. 

Please donwload our both libraries and add the libraries in Arduino. 

https://github.com/BoschSensortec/Bosch-BSEC2-Library

https://github.com/BoschSensortec/Bosch-BME68x-Library

There is example codes for x8 board. 

\Bosch-BSEC2-Library-master\examples\x8_board_examples\

You don't need to change anything, but  directly build and run with the board. 

Please let me know if you have any questions. 

Thank you. 

[Beamur]

I have taken samples using the BME 688 Dev kit and used the AI studio to create a config file.  I am now trying to use that config file with a single BME 688 Adafruit board and an Adafruit QT-py.  I am unsure what example to leverage to best to do live inference. 

Thanks in advance for any assistance.

[Minhwan · Accepted solution]

Any one can ask freely if you need 🙂 

[Minhwan]

You can download our BSEC 2 library as below. 

https://www.bosch-sensortec.com/software-tools/software/bme688-software/

Currently, our example code is based on c and arduino. 

There is BST-BME688-Integration-Guide-AN008-06.pdf in folder, so you can find it. 

Please let me know if you have any questions. 

Thank you. 

[Beamur]

Thank you for your response.  I have installed the library and modified my platform.txt for ESP32s2 with the file you have provided in other posts.  I am now having trouble when I try to compile. It appears the library is for esp32 and not esp32s2.

Can you confirm if the Adafruit ESP32-S2 Feather should work with the BSEC2 library?  

Thanks in advance.