BMI088 Sensing Axes

[aswang]

Is the sensing axes origin at the center of the top face of the sensor housing (Figure 11), with tolerance +/- 0.05 mm? Also, where might I find the error tolerance for the sensor axes orientation? Thank you!

[o_o]

Hi Aswang,

The alignment error for the accelerometer is typically <0.5 degrees and cross-axis sensitivity <0.5%.
For the gyroscope, alignment error is not specified and cross-axis sensitivity is typically <1%.

The actual center point of each axis is not specified within the package. However, the motion required for this to have a significant impact would be outside of the sensing range.

o_o