08-14-2019 03:21 AM
The data sheet says that the accelerometer and gyroscope are in the pause mode by default, and the power consumption is 3uA. But after my test, its power consumption is 83uA. What settings do you have to go through?
08-16-2019 09:13 AM
For the BMI160, both the accelerometer and the gyroscope are in suspend mode after a power-on reset. The power current consumption is approximately 3 uA. No settings are required.
You can refer to the BMI160 Datasheet. In the datasheet, there is a reference design that instructs you how to connect the BMI160 to the system.
I suggest you check Registers 0x02 and 0x03 for the sensor status.
Also, could you please provide more details about your test conditions and upload some pictures? It will help us better analyze the problem.