I just downloaded github, and tested with Arudino UNO.
And I successfully worked fine. Please follow this step.
< Hardware setting >
- Please check the attached file.
< Software setting >
I just copied and run your code, but different thing was I copied all library in arduino running so that I included as below.
Please let me know if you still get an error.
Re: BMI160 Shuttle Board With the Developed Library in Arduino Uno issue
Thanks, Mihwan for the detailed information and especially the photo!
It worked perfectly fine!
In the past, I exactly followed the same pin configuration as you provided and never doubted the GND for 3.3V. This time I used the other pin for GND and the problem solved!!. It is weird for me as the two GNDs should be connected to each other.
By the way, it is working fine. Thanks and I appreciate your time!