09-01-2020 08:58 PM
Hello,
I would like to use the BMP388 on a bus that has a fairly low valued pull-up resistor (<1 kOhm). In order to guarantee compatibility with your device, can you please provide the following information?
Thank you.
09-02-2020 01:34 AM
VIL <= 0.25 VDDIO
VOL <= 0.2 VDDIO (@3mA)
Sorry, didn't find drive current information.
09-02-2020 01:50 PM
Hello,
Thank you for the quick response. I don't need to know exact drive current requriements, but can you please confirm that it will be safe to use a pull up that needs to sink ~4.5 mA? Maybe say 5 mA to be safe.
Thanks!
09-02-2020 08:30 PM
It should be fine even we only test with 3mA now.