Bosch Sensortec Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Compiler Errors with BME 688 (ADAFRUIT board)

    BobEChuck
    New Poster

    Compiler Errors with BME 688 (ADAFRUIT board)

    Hi,

    I am having difficulty getting the BSEC (April release) to  compile with BSEC code.   The compiler output is below and the code is attached.  Your insight would be greatly appreciated.

    Kind regards,

    Robert

     

    Arduino: 1.8.13 (Windows 10), Board: "Adafruit Feather HUZZAH ESP8266, 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, All Flash Contents, 115200"











    C:\Arduino-1-8-13\arduino-builder -dump-prefs -logger=machine -hardware C:\Arduino-1-8-13\hardware -hardware C:\Users\michm\AppData\Local\Arduino15\packages -tools C:\Arduino-1-8-13\tools-builder -tools C:\Arduino-1-8-13\hardware\tools\avr -tools C:\Users\michm\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino-1-8-13\libraries -libraries C:\Users\michm\Documents\Arduino\libraries -fqbn=esp8266:esp8266:huzzah:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M2M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=all,baud=115200 -vid-pid=1A86_7523 -ide-version=10813 -build-path C:\Users\michm\AppData\Local\Temp\arduino_build_465003 -warnings=none -build-cache C:\Users\michm\AppData\Local\Temp\arduino_cache_582016 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.mklittlefs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino
    C:\Arduino-1-8-13\arduino-builder -compile -logger=machine -hardware C:\Arduino-1-8-13\hardware -hardware C:\Users\michm\AppData\Local\Arduino15\packages -tools C:\Arduino-1-8-13\tools-builder -tools C:\Arduino-1-8-13\hardware\tools\avr -tools C:\Users\michm\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino-1-8-13\libraries -libraries C:\Users\michm\Documents\Arduino\libraries -fqbn=esp8266:esp8266:huzzah:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M2M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=all,baud=115200 -vid-pid=1A86_7523 -ide-version=10813 -build-path C:\Users\michm\AppData\Local\Temp\arduino_build_465003 -warnings=none -build-cache C:\Users\michm\AppData\Local\Temp\arduino_cache_582016 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.mklittlefs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino
    Using board 'huzzah' from platform in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2
    Using core 'esp8266' from platform in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2
    Detecting libraries used...
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    Alternatives for EEPROM.h: [EEPROM@1.0]
    ResolveLibrary(EEPROM.h)
    -> candidates: [EEPROM@1.0]
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    Alternatives for Wire.h: [Wire@1.0]
    ResolveLibrary(Wire.h)
    -> candidates: [Wire@1.0]
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    Alternatives for SPI.h: [SPI@1.0]
    ResolveLibrary(SPI.h)
    -> candidates: [SPI@1.0]
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    Alternatives for bsec.h: [BME--1]
    ResolveLibrary(bsec.h)
    -> candidates: [BME--1]
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM\\EEPROM.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire\\Wire.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI\\SPI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bme68x.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec_serialized_configurations_iaq.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec_serialized_configurations_selectivity.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
    Generating function prototypes...
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE
    "C:\\Arduino-1-8-13\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\preproc\\ctags_target_for_gcc_minus_e.cpp"
    Compiling sketch...
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/signing.py" --mode header --publickey "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1/public.key" --out "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core/Updater_Signing.h"
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c.o"
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c.o"
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c.o"
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp.o"
    "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp.o"
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void setup()':
    BME--1:43:57: error: 'class Bsec' has no member named 'version'
    43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
    | ^~~~~~~
    BME--1:43:97: error: 'class Bsec' has no member named 'version'
    43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
    | ^~~~~~~
    BME--1:43:137: error: 'class Bsec' has no member named 'version'
    43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
    | ^~~~~~~
    BME--1:43:184: error: 'class Bsec' has no member named 'version'
    43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
    | ^~~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void loop()':
    BME--1:76:39: error: 'class Bsec' has no member named 'rawTemperature'
    76 | output += ", " + String(iaqSensor.rawTemperature);
    | ^~~~~~~~~~~~~~
    BME--1:77:39: error: 'class Bsec' has no member named 'pressure'
    77 | output += ", " + String(iaqSensor.pressure);
    | ^~~~~~~~
    BME--1:78:39: error: 'class Bsec' has no member named 'rawHumidity'
    78 | output += ", " + String(iaqSensor.rawHumidity);
    | ^~~~~~~~~~~
    BME--1:79:39: error: 'class Bsec' has no member named 'gasResistance'
    79 | output += ", " + String(iaqSensor.gasResistance);
    | ^~~~~~~~~~~~~
    BME--1:80:39: error: 'class Bsec' has no member named 'iaq'
    80 | output += ", " + String(iaqSensor.iaq);
    | ^~~
    BME--1:81:39: error: 'class Bsec' has no member named 'iaqAccuracy'
    81 | output += ", " + String(iaqSensor.iaqAccuracy);
    | ^~~~~~~~~~~
    BME--1:82:39: error: 'class Bsec' has no member named 'temperature'
    82 | output += ", " + String(iaqSensor.temperature);
    | ^~~~~~~~~~~
    BME--1:83:39: error: 'class Bsec' has no member named 'humidity'
    83 | output += ", " + String(iaqSensor.humidity);
    | ^~~~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void checkIaqSensorStatus()':
    BME--1:94:17: error: 'class Bsec' has no member named 'status'
    94 | if (iaqSensor.status != BSEC_OK) {
    | ^~~~~~
    BME--1:95:19: error: 'class Bsec' has no member named 'status'
    95 | if (iaqSensor.status < BSEC_OK) {
    | ^~~~~~
    BME--1:96:56: error: 'class Bsec' has no member named 'status'
    96 | output = "BSEC error code : " + String(iaqSensor.status);
    | ^~~~~~
    BME--1:101:58: error: 'class Bsec' has no member named 'status'
    101 | output = "BSEC warning code : " + String(iaqSensor.status);
    | ^~~~~~
    BME--1:106:17: error: 'class Bsec' has no member named 'bme680Status'; did you mean 'int8_t Bsec::_bme68x_status'? (accessible via 'int8_t Bsec::getBme68xStatus() const')
    106 | if (iaqSensor.bme680Status != BME680_OK) {
    | ^~~~~~~~~~~~
    | getBme68xStatus()
    BME--1:106:33: error: 'BME680_OK' was not declared in this scope; did you mean 'BME68X_OK'?
    106 | if (iaqSensor.bme680Status != BME680_OK) {
    | ^~~~~~~~~
    | BME68X_OK
    BME--1:107:19: error: 'class Bsec' has no member named 'bme680Status'; did you mean 'int8_t Bsec::_bme68x_status'? (accessible via 'int8_t Bsec::getBme68xStatus() const')
    107 | if (iaqSensor.bme680Status < BME680_OK) {
    | ^~~~~~~~~~~~
    | getBme68xStatus()
    BME--1:108:58: error: 'class Bsec' has no member named 'bme680Status'; did you mean '_bme68x_status'?
    108 | output = "BME680 error code : " + String(iaqSensor.bme680Status);
    | ^~~~~~~~~~~~
    | _bme68x_status
    BME--1:108:58: error: 'int8_t Bsec::_bme68x_status' is private within this context
    In file included from C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:2:
    C:\Users\michm\AppData\Local\Temp\arduino_build_465003\sketch\bsec.h:294:9: note: declared private here
    294 | int8_t _bme68x_status; // Placeholder for the BME68x driver's error codes
    | ^~~~~~~~~~~~~~
    BME--1:113:60: error: 'class Bsec' has no member named 'bme680Status'; did you mean '_bme68x_status'?
    113 | output = "BME680 warning code : " + String(iaqSensor.bme680Status);
    | ^~~~~~~~~~~~
    | _bme68x_status
    BME--1:113:60: error: 'int8_t Bsec::_bme68x_status' is private within this context
    In file included from C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:2:
    C:\Users\michm\AppData\Local\Temp\arduino_build_465003\sketch\bsec.h:294:9: note: declared private here
    294 | int8_t _bme68x_status; // Placeholder for the BME68x driver's error codes
    | ^~~~~~~~~~~~~~
    BME--1:117:13: error: 'class Bsec' has no member named 'status'
    117 | iaqSensor.status = BSEC_OK;
    | ^~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void updateState()':
    BME--1:158:19: error: 'class Bsec' has no member named 'iaqAccuracy'
    158 | if (iaqSensor.iaqAccuracy >= 3) {
    | ^~~~~~~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: At global scope:
    basic_config_state:19:6: error: redefinition of 'void setup()'
    19 | void setup(void)
    | ^~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:36:6: note: 'void setup()' previously defined here
    36 | void setup(void)
    | ^~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: In function 'void setup()':
    basic_config_state:40:26: error: 'bsec_config_selectivity' was not declared in this scope
    40 | !bsecInst.setConfig(bsec_config_selectivity) ||
    | ^~~~~~~~~~~~~~~~~~~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: At global scope:
    basic_config_state:50:6: error: redefinition of 'void loop()'
    50 | void loop(void)
    | ^~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:71:6: note: 'void loop()' previously defined here
    71 | void loop(void)
    | ^~~~
    basic_config_state:56:6: error: redefinition of 'void errLeds()'
    56 | void errLeds(void)
    | ^~~~~~~
    C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:120:6: note: 'void errLeds()' previously defined here
    120 | void errLeds(void)
    | ^~~~~~~
    Using library EEPROM at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\EEPROM
    Using library Wire at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\Wire
    Using library SPI at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\SPI
    Using library BME--1 in folder: C:\Users\michm\Documents\Arduino\libraries\BME--1 (legacy)
    exit status 1
    'class Bsec' has no member named 'version'

     

    The code......

    include <EEPROM.h>
    #include "bsec.h"
    /* Configure the BSEC library with information about the sensor
    18v/33v = Voltage at Vdd. 1.8V or 3.3V
    3s/300s = BSEC operating mode, BSEC_SAMPLE_RATE_LP or BSEC_SAMPLE_RATE_ULP
    4d/28d = Operating age of the sensor in days
    generic_18v_3s_4d
    generic_18v_3s_28d
    generic_18v_300s_4d
    generic_18v_300s_28d
    generic_33v_3s_4d
    generic_33v_3s_28d
    generic_33v_300s_4d
    generic_33v_300s_28d
    */
    const uint8_t bsec_config_iaq[] = {
    //#include "config/generic_33v_3s_4d/bsec_iaq.txt"
    };

    #define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // 360 minutes - 4 times a day

    // Helper functions declarations
    void checkIaqSensorStatus(void);
    void errLeds(void);
    void loadState(void);
    void updateState(void);

    // Create an object of the class Bsec
    Bsec iaqSensor;
    uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
    uint16_t stateUpdateCounter = 0;

    String output;

    // Entry point for the example
    void setup(void)
    {
    EEPROM.begin(BSEC_MAX_STATE_BLOB_SIZE + 1); // 1st address for the length
    Serial.begin(115200);
    Wire.begin();

    iaqSensor.begin(BME68X_I2C_ADDR_LOW, Wire);
    output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix);
    Serial.println(output);
    checkIaqSensorStatus();

    iaqSensor.setConfig(bsec_config_iaq);
    checkIaqSensorStatus();

    loadState();

    bsec_virtual_sensor_t sensorList[7] = {
    BSEC_OUTPUT_RAW_TEMPERATURE,
    BSEC_OUTPUT_RAW_PRESSURE,
    BSEC_OUTPUT_RAW_HUMIDITY,
    BSEC_OUTPUT_RAW_GAS,
    BSEC_OUTPUT_IAQ,
    BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
    BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
    };

    iaqSensor.updateSubscription(sensorList, 7, BSEC_SAMPLE_RATE_LP);
    checkIaqSensorStatus();

    // Print the header
    output = "Timestamp [ms], raw temperature [°C], pressure [hPa], raw relative humidity [%], gas [Ohm], IAQ, IAQ accuracy, temperature [°C], relative humidity [%]";
    Serial.println(output);
    }

    // Function that is looped forever
    void loop(void)
    {
    unsigned long time_trigger = millis();
    if (iaqSensor.run()) { // If new data is available
    output = String(time_trigger);
    output += ", " + String(iaqSensor.rawTemperature);
    output += ", " + String(iaqSensor.pressure);
    output += ", " + String(iaqSensor.rawHumidity);
    output += ", " + String(iaqSensor.gasResistance);
    output += ", " + String(iaqSensor.iaq);
    output += ", " + String(iaqSensor.iaqAccuracy);
    output += ", " + String(iaqSensor.temperature);
    output += ", " + String(iaqSensor.humidity);
    Serial.println(output);
    updateState();
    } else {
    checkIaqSensorStatus();
    }
    }

    // Helper function definitions
    void checkIaqSensorStatus(void)
    {
    if (iaqSensor.status != BSEC_OK) {
    if (iaqSensor.status < BSEC_OK) {
    output = "BSEC error code : " + String(iaqSensor.status);
    Serial.println(output);
    for (;;)
    errLeds(); /* Halt in case of failure */
    } else {
    output = "BSEC warning code : " + String(iaqSensor.status);
    Serial.println(output);
    }
    }

    if (iaqSensor.bme680Status != BME680_OK) {
    if (iaqSensor.bme680Status < BME680_OK) {
    output = "BME680 error code : " + String(iaqSensor.bme680Status);
    Serial.println(output);
    for (;;)
    errLeds(); /* Halt in case of failure */
    } else {
    output = "BME680 warning code : " + String(iaqSensor.bme680Status);
    Serial.println(output);
    }
    }
    iaqSensor.status = BSEC_OK;
    }

    void errLeds(void)
    {
    pinMode(LED_BUILTIN, OUTPUT);
    digitalWrite(LED_BUILTIN, HIGH);
    delay(100);
    digitalWrite(LED_BUILTIN, LOW);
    delay(100);
    }

    void loadState(void)
    {
    if (EEPROM.read(0) == BSEC_MAX_STATE_BLOB_SIZE) {
    // Existing state in EEPROM
    Serial.println("Reading state from EEPROM");

    for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) {
    bsecState[i] = EEPROM.read(i + 1);
    Serial.println(bsecState[i], HEX);
    }

    iaqSensor.setState(bsecState);
    checkIaqSensorStatus();
    } else {
    // Erase the EEPROM with zeroes
    Serial.println("Erasing EEPROM");

    for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE + 1; i++)
    EEPROM.write(i, 0);

    EEPROM.commit();
    }
    }

    void updateState(void)
    {
    bool update = false;
    /* Set a trigger to save the state. Here, the state is saved every STATE_SAVE_PERIOD with the first state being saved once the algorithm achieves full calibration, i.e. iaqAccuracy = 3 */
    if (stateUpdateCounter == 0) {
    if (iaqSensor.iaqAccuracy >= 3) {
    update = true;
    stateUpdateCounter++;
    }
    } else {
    /* Update every STATE_SAVE_PERIOD milliseconds */
    if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) {
    update = true;
    stateUpdateCounter++;
    }
    }

    if (update) {
    iaqSensor.getState(bsecState);
    checkIaqSensorStatus();

    Serial.println("Writing state to EEPROM");

    for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE ; i++) {
    EEPROM.write(i + 1, bsecState[i]);
    Serial.println(bsecState[i], HEX);
    }

    EEPROM.write(0, BSEC_MAX_STATE_BLOB_SIZE);
    EEPROM.commit();
    }
    }

    4 REPLIES 4
    BSTRobin
    Community Moderator

    Re: Compiler Errors with BME 688 (ADAFRUIT board)

    Hello BobEChuck,

    Which BSEC version you used?
    Normally, it had example code in BSEC package, could you run example first?

    BobEChuck
    New Poster

    Re: Compiler Errors with BME 688 (ADAFRUIT board)

    Hi,

    I tried BSEC 1.4.8.0 and it seemed to compile.

    I am attempting to compile BSEC 2.0.6.1 and cannot succeed. That is the one I need help to proceed.

    Kind regards,

    Robert
    BobEChuck
    New Poster

    Re: Compiler Errors with BME 688 (ADAFRUIT board)

    It is the basic example that I am trying.

    Robert
    BSTRobin
    Community Moderator

    Re: Compiler Errors with BME 688 (ADAFRUIT board)

    Hello BobEChuck,

    ESP8266 was supported.
    It seems to have something to do with your Arduino environment. Have you compiled any Arduino projects successfully?

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist