02-25-2023 12:55 PM - edited 02-25-2023 01:01 PM
Hello!
Based on my findings in this forum. If I want to calibrate the BHI260AP sensors, I need to do that with the Development Desktop 2.0 tool. Following this tutorial: https://www.youtube.com/watch?v=Bw0WuAyGsnY
When opening the Development Desktop 2.0 application, it requests a connection board. I expected that I can use the Nicla as connection board, but it seems not to work since I can not connect it "No response from the board. Please select correct port".
Am I wrong with this, or is there a way to create a calibration routine and use the BHY2 library to update the calibration?
Since I most likely need to have the board in an environment where I can not just flash the sensor, I would like to calibrate it based on the surroundings. I saw the "bhy2_set_calibration_profile" method in the BHY2-Sensor-API/bhy2.c file, but could not see it referenced somewhere else then here BHI260AB-calibration.
Thank You
02-28-2023 03:22 PM
Hi nerubjen,
Firstly, we would like to know is BHI260AP located on your own hardware board or Nicla Sense ME board when you would like to calibrate BHI260AP?
02-28-2023 03:25 PM
Hey! Thank you for coming back at me.
It's mounted on the Nicla Sense ME
Best
03-19-2023 11:32 AM
any infos about that? Or is a calibration not needed since its self-calibrating?
03-28-2023 04:46 AM
Hi nerubjen,
If you use Nicla Sense ME, currently the software haven't support BHI260AP calibration output.
If you use BHI260AP shuttle 3.0 and communicate it with MCU, you can get calibration profile from sensor API https://github.com/boschsensortec/BHY2-Sensor-API
https://www.bosch-sensortec.com/media/boschsensortec/downloads/shuttle_board_flyer/application_board...