Develpoment kit app jammed

[UEF]

Hi,

We are using BME Ai-Studio v2.0.0, development kit software v2.0.6 and mobile app v1.1.3. (all are the latest ones)

We are using .bmeconfig generated by Ai-Studio v.2.0.0 and put it to the sd card.

We have trained our algorithm and put the required two files to the sd card.

Now we want to use the app to see the results live. But when we connect the development kit to the app and it starts running, it will eventually stop and does not do anything after that. (screenvideo is as a attachement).

We have tried all the BSEC Versions that Ai-Studio can generate from the data training. (versions can be seen as a attachement)

Does anyone know why the app stops and does not give us any results?

[BSTRobin]

Hi UEF,

From release note under BME688 dev kit package, BME688 dev kit v2.0.6 require BME AI-Studio v2.0.0 and BSEC v2.4.0.0. When you export config file, you should choose BSEC v2.4.0.0.

[UEF]

We have already tried with BSEC v2.4.0.0 and it does always the same thing as in my problem.

[Clemens]

It is not working in this combination, we made the same experiences: https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BME688-connection-to-Android-App/m-p/707... It is ok if some software combination is not working and we have to wait for a new one or have to use old but compatible software. Unfortunately Bosch is not good in the communication and leads to the impression that you have to use the newest version and all is working. This is not true! Nothing is working as al lot of postings are showing. Why not be honest and saying it is not working yet than repeatedly point to "the newest version" argument and documentation that following do still not lead to success? Bosch is so wasting a lot of time from many people here that trying things out other people (from Bosch) know that it CAN NOT work! So please stay to not working combinations and lead no more people to try things out that can not work!

[BSTRobin]

Hi UEF,

After you upload v2.0.6 software to BME688 dev kit, you could copy attached config file(generated in BME AI-Studio v2.0.0) to SD card, and run it again.