How to interface BME680 with PIC32MK1024GPK064 controller?

[ankur]

Hello,

I need to interface BME680 with PIC32MK1024GPK064 but I didn't find the library file for the same.

Below are the software details:

MCU detailed type: PIC32MK1024GPK064 and PIC32MK Curiosity Pro Development Board
IDE version: MPLAB X IDE v5.40
Compiling options: XC32 v2.41

Kindly suggest how can I integrate BME680 with the PIC32MK1024GPK064 controller.

Thank you,

Ankur Patel

[ankur]

Hello Minhwan,

Thanks for the Library file but it doesn't work with the PIC32MK microcontroller.

Kindly provide a library file compatible with the PIC32MK1024MCM100 and PIC32MK1024GPK064 microcontroller.

Regards,

Ankur Patel

[Minhwan]

Hello Ankur, 

I reported it to my team, and will back to you when I have library. 

Thanks 🙂 

[ankur]

Hello Minhwan,

Is there any update about the library file?

Can you please give priority to generating a library file for me?

Regards,

Ankur Patel

[Minhwan]

Hello Ankur, 

Here is the PIC32 MX release 🙂 

Please let me know if you have any questions. 

Thanks, 

[ankur]

Hello Minhwan,

Thanks for the reply and for providing the library file.

"BSEC_1.4.7.4_PIC32MX_Release_20200810.zip" is the same library file & version that you send me earlier (3weeks ago) refer attached image for the same.

I already reported to you that the "BSEC_1.4.7.4_PIC32MX_Release_20200810.zip" file is not working properly with PIC32MK Microcontroller as PIC32MK is a different Controller family from Microchip.

Kindly provide a library file compatible with the PIC32MK1024MCM100 and PIC32MK1024GPK064 microcontroller.

From my side:

- I have tested your given library file with PIC32MK MCM Curiosity Pro for 1-hour duration, below are the results which were don’t change during Testing:

• iaq = 0
• iaq_accuracy = 0
• Humidity = 0
• co2_equivalent = 400 ppm
• breath_voc_equivalent = 0.10 ppm

Please refer attached log file of testing.

Let me know if you need anything from my side. Your earlier help will be appreciated as we are planning to build a prototype in Q1 of 2021.

Regards,

Ankur Patel