Hello Everyone , I am conducting some tests on the BME680 sensors and their respose to the enviroment, So for the test purpose I have placed two of the sensor exactly on the same location , and others are placed at some distance from them, I have let the sensors to run for 3 days,after three days , I have burnt some plastic material, in order to create smoky enviroment, the enviromentwas quite smoky,
What I found some strange things , the two sensors placed next to each other performs differently , Which I will show you on the graph , The two sensors placed almostly on the same location , then it should responeded to the enviroment in exactly the same way, but from the graph it behaves differently I just want to know the reason why this different behaviour is shown by the sensor that are placed exactly on the same location.
Note: I am using BSEC Library , and the sensors are operating in LP Mode, IAQ Configuration is : generic_33v_300s_4d, but because I am using LP mode of the sensor , the interval between readings is : 3 Seconds.
As you can see the sensor marked with white colour , are placed next to each other , but the graph shows different behaviour, This should be of same shape.
NOTE: This is the Static IAQ values reporting by the sensors.
Any help in regarding this will much be appreciated Thanks.
Solved! Go to Solution.
Yes Static IAQ Curves of sensor 1 and sensor 2 in the respective images . They are started at the same time and placed next to each other as you can varify from the timing in the x-axis , Initially the IAQ Accuracy was 3 , and then changed to 2 and then goes back to 3 for both sensors during this "Time Slice".