Bosch Sensortec Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 
    SOLVED

    Request BSEC 2.2.0.0 for ESP32-C3

    Joris
    Member

    Request BSEC 2.2.0.0 for ESP32-C3

    Hi,

    The GitHub repo, https://github.com/BoschSensortec/Bosch-BSEC2-Library , has advanced to 2.2.0.0

    Can you provide this version, 2.2.0.0, with matching generic config files for ESP32-C3 ?

    Best,

    Joris

    5 REPLIES 5
    BSTRobin
    Community Moderator

    Re: Request BSEC 2.2.0.0 for ESP32-C3

    Hi Joris,

    You could refer another topic https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BME-680-BSEC-for-ESP32-C3/td-p/54638/pag... to get BSEC2 ESP32-C3 library.

    Joris
    Member

    Re: Request BSEC 2.2.0.0 for ESP32-C3

    @BSTRobin 

    I'm aware of that topic. I've even replied mutiple times there.

    But, the ESP32-C3 version in that topic is older. I would like a 2.2.0.0 version, with matching generic config files, for the C3 variant.

    Best regards,

    Joris

    BSTRobin
    Community Moderator

    Re: Request BSEC 2.2.0.0 for ESP32-C3

    Hi Joris,

    Thank for your feedback.
    I will discuss the release of the latest library with the internal team.

    Joris
    Member

    Re: Request BSEC 2.2.0.0 for ESP32-C3

    @BSTRobin 

    I've noticed the commits in the  Bosch-BSEC2-Library on GitHub. Thank you for including the ESP-32-C3 version!

    I've done some test with the 2.2.0.0 BSEC library (Arduino via Esphome) and have a few questions:

    1. Temperature readings are not very stable when using BSEC library. When I use the old, non BSEC, library I can turn the internal heater off, which results in a far more stable temperature readings. I assume the jitter comes form the internal heater. Is there a way to turn the heater off when using the BSEC library, or will this feature be implemented in a furure BSEC version?
    2. Do you have generic config files for the 2.2.0.0 BSEC library? I use the sensor (BME680) at 3V3. I believe the sensor's config defaults to 1V8. The older BSEC library had those ( ref: https://github.com/boschsensortec/BSEC-Arduino-library/tree/master/src/config )

    Best regards,

    Joris

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist