Smart sensor BMI160 or BMA456

[Tsi]

Hello,

My English is bad but I would like some information.
The Bosch Sensortec 2.0 application card and software are
they compatible with all bosch sensors like the BMI160 and the BMA456.
Then I would like to know how many sensors it is possible to connect at the same time and read the values in particular of acceleration in my case.
I have the impression that I can connect up to 3 sensors at the same time and acquire their data.

And finally we need the shuttle board or with the sensor alone can be wired? 

thank you in advance for the information and apologize for my poor english.

[handytech]

The ApplicationBoard2.0 is compatible with all the shuttle boards available today, including BMI160 and BMA456, but was designed to only support one shuttle board at a time. 

[Tsi]

Hi thanks for answers, 

So if it is impossible to read connect 3 accelerometers to what corresponds the 3 display curves plot 1, plot 2 and plot 3.
We can display 3 accelerometer values I have the impression since on each pad we have the possibility to choose accelerometer

[handytech]

The meaning of each plot depends on the sensor connected and are often customizable. For example, the BMI160 shuttle board also includes a magnetometer, therefore each plot could be respectively accelerometer, gyroscope and magnetometer signals.