What is the missing dimension of the shuttle board 3.0?

[vjaz]

I've found the dimensions section is the flyers, but it lacks one parameter: the relative position of the connectors to the PCB edge.

Here is what I mean. (Of course, knowing only one of the two marked distances would be sufficient.)

[FAE_CA1]

Hi,

Thanks for your feedback. The dimensions between the connectors to the PCB edge of APP3.0 shuttle boards are not that critical.

Thanks.

[vjaz]

Well, ok, but I would still like to know it, if possible.

[FAE_CA1]

Let me check with our engineering team and then get back to you with those dimensions.

Thanks.

[FAE_CA1 · Accepted solution]

Hi,

We took BMA400 shuttle board 3.0 as an example to indicate the missing dimensions as shown below. Please let us know if this is good enough to you or not.

Thanks.