08-20-2021 02:57 PM
I've found the dimensions section is the flyers, but it lacks one parameter: the relative position of the connectors to the PCB edge.
Here is what I mean. (Of course, knowing only one of the two marked distances would be sufficient.)
Solved! Go to Solution.
08-20-2021 05:13 PM
Thanks for your feedback. The dimensions between the connectors to the PCB edge of APP3.0 shuttle boards are not that critical.
08-20-2021 06:15 PM
Well, ok, but I would still like to know it, if possible.
08-20-2021 06:22 PM
Let me check with our engineering team and then get back to you with those dimensions.
08-26-2021 08:41 PM
We took BMA400 shuttle board 3.0 as an example to indicate the missing dimensions as shown below. Please let us know if this is good enough to you or not.