I've found the dimensions section is the flyers, but it lacks one parameter: the relative position of the connectors to the PCB edge.
Here is what I mean. (Of course, knowing only one of the two marked distances would be sufficient.)
Go to Solution.
Thanks for your feedback. The dimensions between the connectors to the PCB edge of APP3.0 shuttle boards are not that critical.
Well, ok, but I would still like to know it, if possible.
Let me check with our engineering team and then get back to you with those dimensions.
We took BMA400 shuttle board 3.0 as an example to indicate the missing dimensions as shown below. Please let us know if this is good enough to you or not.