07-25-2022 09:13 PM
As configured the bme688 kit saves files in .csv format but the manual wants.bmerawdata format. Changing the csv file name does not correct the inability to import data. Any suggestions? Changing the saved file format in the Arduino code also does not allow importation. Stopped at square1
Solved! Go to Solution.
07-26-2022 04:03 AM
Hi Buz-lactarius,
Do you want to import RAW data or export configuration files?
This guide will be helpful for your.
07-30-2022 10:49 PM
For import the AI program says it wants .bmerawdata . Error code returns could not save in that format or words to that effect.
08-02-2022 05:01 AM
Hi Buz-lactarius,
If you followed BME688 and BME AI-Studio guide and recorded data with BME688 dev kit, you can find .bmerawdata file in SD card. This .bmerawdata could be imported to BME AI-Studio.
08-04-2022 03:06 AM
Robin thanks for you replies.....
Line 14 of the bme688_dev_kit code:
#define LOG_FILE_NAME "/BME688_Datalogger_Log.csv"
no where in the code is the extension .bmerawdata mentioned.
Still Stuck