10-22-2021 11:22 AM
I am using bme680 for iaq calculation and another sensor is one of optical sensor which gives some optical data ...because of infinite bsec_iot_loop i can't do anything for this optical sensor .so please help me how to do other tasks while using Bsec_iot_loop(), I also trying timer-based interrupt to read optical data but after some time error occurs.is any method to calculate iaq .I have used the nrf52840 controller .and i want to run only one thread so please help me also i post my query on the community forum.
Solved! Go to Solution.
11-09-2021 08:10 AM
yes, its works. I used a timer to call the above function but when I tried to call with a custom time interval (10sec) IAQ did not change. I want to calculate IAQ every (10 sec) .is it possible?
11-11-2021 08:55 AM
Hello pallyapd,
Timer interval should be configured according your BSEC config file.
11-23-2021 11:56 AM
I want to use a custom sampling rate(every 60 sec) .but only two sampling rates are available (LP and ULP).how to calculate iaq with a custom sampling period..?
11-25-2021 07:17 AM
Hello pallyapd,
Currently, only configurations in the list are supported.
04-01-2022 08:18 AM
in bsec only 2 configurations are available. I create a timer which is called bsec_loop every 3 seconds (lp mode) it works fine .but whenever I configure ULP mode 300 seconds IAQ is not calculated.IAQ_accurancy remains zero.