Hi Robin, pelase see the attached PDF - this is what i purchased. the document is from Bosch (https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bme688-fl001.pdf) The sotware that i download only has the binary but not the c-code. I am having trobule finding documentation on how to access the 8 sensor board here. I thought having this code would have been very helpful example. this code seems to be automatically logging the data into the micoSD card which the AI studio seems to use. see the insutctions that was listed in that document. 1) Download the dev-kit software from https://www.bosch- sensortec.com/software-tools/software/BME688- software/ 2) Copy the *.bmeconfig file on the microSD card 3) Place microSD card and CR1220 coin cell into dev-kit board and stack it on the Adafruit board 4) Connect the board to PC via micro-USB data cable 5) Run “flash.bat” on PC by choosing the right COM port I believe this code is from Bosch. In the sw that i downloaded - the bme68x_demo_sample.ino.bin was there. this is what i am requesting. Thanks again for your help. Best Karthik
... View more