About Swingpro

I am interested to know what other people are finding but fundamentally a device doesn't seem to exhibit the same drift characteristics through multiple runs in a quiessent unstimulated position - so laying flat with X/Y parallel to the desk top. In one run it will show the usual increase in drift with time, the next run it will exhibit no drift or even fluctuating amounts of drift ... View more

I'm reading the App Bd 3.0 User Guide and the Shuttle Board Data Sheet. They show that Int1/2 are pins P1 6/7 on the App Board. My question is whether or not there is any access on the board side to those interupt pins P1 6/7? For example, On App Board 2.0, all the shuttle pins had a "shadow" berg pin on the board that connected to the pins of the IMU Shuttle Board which would allow a user to connect an Interupt signal to the IMU. Is there any such connection facility on App Bd 3? ... View more

Thanks - on the interrupt being made available - I see that the interrupt pins are part of the shuttle board connection but is there anywhere else on the board where those same interrupts pins can be accessed?   Also - the PN provided for Molex is the header connector. I was asking if there was a battery holder. ... View more