Hi, On our latest boards, I see the current consumption to be going around 160 uA in suspend mode. Just to make sure that I measure only BNO055 current I remove the ferrite L3 (as per the schematic in the previous post) and attach a current meter. Also to make sure that there are no board level issues, I also measure current consumption on the Atmel BNO055 Xplained Pro board. On the Xplained Pro board the current consumption is around 196 uA. Current on Xplained pro board is measured by removing the 0 ohm resistor R113 and attaching a current meter in series. I am also attaching pictures of current readings taken on both the boards for your reference. Seeing this it seems to be a firmware issue to me hence I am posting my initialization sequence: 1. Change operation mode to config. 2. Remap Axis. 3. Set output units and data format. 4. Change operation mode to NDOF. 5. Set power mode to suspend. The clock source selected is internal RC oscillator. Please comment on this.
... View more