hi all, I'm facing a problem with initial configuration of bmi270 using python. Looking at its datasheet and configuring the device for normal power mode without the initialization sequence it doesn't work.I understand that config file must be loaded,but how can i load the config file with PYTHON SCRIPT in order to get BMI270 working? becouse now if i read data register (DATA_8 - DATA-13) without inizialization sequence i get always zero I hope you can help me Thanks and regards, TESTING COMUNICATION bus.read_byte_data(0x68, 0x00) -> responde 0x24 COMUNICATION OK ----- INIZIALIZATION SEQUENCE bus.write_byte_data(0x68, 0x7C, 0x00) time.sleep(0.005) bus.write_byte_data(0x68, 0x59, 0x00) bus.write_i2c_block_data(0x68, 0x5E, bmi270_config_file) bus.write_byte_data(0x68, 0x59, 0x01) ------------ CHECKING THE CORRECT INIZIALIZATION STATUS bus.read_byte_data(0x68, 0x21) -> responde 0 INIZIALIZATION ERROR ---------- NORMAL POWER MODE bus.write_byte_data(0x68, 0x7D, 0x0E) bus.write_byte_data(0x68, 0x40, 0xA8) bus.write_byte_data(0x68, 0x41, 0x02) bus.write_byte_data(0x68, 0x42, 0xA9) bus.write_byte_data(0x68, 0x7C, 0x02) data8 = bus.read_byte_data(0x68, 0x0C) -> 0 data9 = bus.read_byte_data(0x68, 0x0D) -> 0 data10 = bus.read_byte_data(0x68, 0x0E) -> 0 data11 = bus.read_byte_data(0x68, 0x0F) -> 0 data12= bus.read_byte_data(0x68, 0x10) -> 0 data13 = bus.read_byte_data(0x68, 0x11) -> 0 ---------------
... View more