/** * Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved. * * BSD-3-Clause * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * @file bma4.c * @date 2020-04-09 * @version V2.14.12 * */ /* * @file bma4.c * @brief Source file for the BMA4 Sensor API */ /***************************************************************************/ /*! * @defgroup bma4 BMA4 */ /**\name Header files ****************************************************************************/ #include "bma4.h" /***************************************************************************/ /**\name Local structures ****************************************************************************/ /*! * @brief Accel data deviation from ideal value */ struct bma4_offset_delta { /*! X axis */ int16_t x; /*! Y axis */ int16_t y; /*! Z axis */ int16_t z; }; /*! * @brief Accel offset xyz structure */ struct bma4_accel_offset { /*! Accel offset X data */ uint8_t x; /*! Accel offset Y data */ uint8_t y; /*! Accel offset Z data */ uint8_t z; }; /***************************************************************************/ /*! Static Function Declarations ****************************************************************************/ /*! * @brief This API validates the bandwidth and perfmode * value set by the user. * * param bandwidth[in] : bandwidth value set by the user. * param perf_mode[in] : perf_mode value set by the user. */ static int8_t validate_bandwidth_perfmode(uint8_t bandwidth, uint8_t perf_mode); /*! * @brief @brief This API validates the ODR value set by the user. * * param bandwidth[in] : odr for accelerometer */ static int8_t validate_odr(uint8_t odr); /*! * @brief This API is used to reset the FIFO related configurations * in the fifo_frame structure. * * @param fifo[in,out] : Structure instance of bma4_fifo_frame * */ static void reset_fifo_data_structure(struct bma4_fifo_frame *fifo); /*! * @brief This API computes the number of bytes of accel FIFO data * which is to be parsed in header-less mode * * @param[out] start_idx : The start index for parsing data * @param[out] len : Number of bytes to be parsed * @param[in] acc_count : Number of accelerometer frames to be read * @param[in] fifo : Structure instance of bma4_fifo_frame. * */ static void get_accel_len_to_parse(uint16_t *start_idx, uint16_t *len, const uint16_t *acc_count, const struct bma4_fifo_frame *fifo); /*! * @brief This API checks the fifo read data as empty frame, if it * is empty frame then moves the index to last byte. * * @param[in,out] data_index : The index of the current data to * be parsed from fifo data * @param[in] fifo : Structure instance of bma4_fifo_frame. */ static void check_empty_fifo(uint16_t *data_index, const struct bma4_fifo_frame *fifo); /*! * @brief This API is used to parse the accelerometer data from the * FIFO data in header mode. * * @param[in,out] accel_data : Structure instance of bma4_accel where * the accelerometer data in FIFO is stored. * @param[in,out] accel_length : Number of accelerometer frames * (x,y,z axes data) * @param[in,out] fifo : Structure instance of bma4_fifo_frame * @param[in,out] dev : Structure instance of bma4_dev. * */ static void extract_accel_header_mode(struct bma4_accel *accel_data, uint16_t *accel_length, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API is used to parse the accelerometer data from the * FIFO data in both header mode and header-less mode. * It update the idx value which is used to store the index of * the current data byte which is parsed. * * @param[in,out] acc : Structure instance of bma4_accel. * @param[in,out] idx : Index value of number of bytes parsed * @param[in,out] acc_idx : Index value of accelerometer data * (x,y,z axes) frame to be parsed * @param[in] frm : It consists of either fifo_data_enable * parameter (Accel and/or mag data enabled in FIFO) * in header-less mode or frame header data * in header mode * @param[in] fifo : Structure instance of bma4_fifo_frame. * @param[in] dev : Structure instance of bma4_dev. * */ static void unpack_acc_frm(struct bma4_accel *acc, uint16_t *idx, uint16_t *acc_idx, uint8_t frm, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API is used to parse the accelerometer data from the * FIFO data and store it in the instance of the structure bma4_accel. * * @param[out] accel_data : Structure instance of bma4_accel where * the parsed accel data bytes are stored. * @param[in] data_start_index : Index value of the accel data bytes * which is to be parsed from the fifo data. * @param[in] fifo : Structure instance of bma4_fifo_frame. * @param[in] dev : Structure instance of bma4_dev. * */ static void unpack_accel_data(struct bma4_accel *accel_data, uint16_t data_start_index, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API computes the number of bytes of Mag FIFO data which is * to be parsed in header-less mode * * @param[out] start_idx : The start index for parsing data * @param[out] len : Number of bytes to be parsed * @param[in] mag_count : Number of magnetometer frames to be read * @param[in] fifo : Structure instance of bma4_fifo_frame. * */ static void get_mag_len_to_parse(uint16_t *start_idx, uint16_t *len, const uint16_t *mag_count, const struct bma4_fifo_frame *fifo); /*! * @brief This API is used to parse the magnetometer data from the * FIFO data in header mode. * * @param[in,out] data : Structure instance of bma4_mag_xyzr where * the magnetometer data in FIFO is extracted * and stored. * @param[in,out] len : Number of magnetometer frames * (x,y,z,r data) * @param[in,out] fifo : Structure instance of bma4_fifo_frame. * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t extract_mag_header_mode(const struct bma4_mag *data, uint16_t *len, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API is used to parse the magnetometer data from the * FIFO data in both header mode and header-less mode and update the * idx value which is used to store the index of the current * data byte which is parsed. * * @param data : Structure instance of bma4_mag_xyzr. * @param idx : Index value of number of bytes parsed * @param mag_idx : Index value magnetometer data frame (x,y,z,r) * to be parsed * @param frm : It consists of either the fifo_data_enable parameter * (Accel and/or mag data enabled in FIFO) in * header-less mode and frame header data in header mode * @param fifo : Structure instance of bma4_fifo_frame. * @param dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t unpack_mag_frm(const struct bma4_mag *data, uint16_t *idx, uint16_t *mag_idx, uint8_t frm, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API is used to parse the auxiliary magnetometer data from * the FIFO data and store it in the instance of the structure mag_data. * * @param mag_data : Structure instance of bma4_mag_xyzr where the * parsed magnetometer data bytes are stored. * @param start_idx : Index value of the magnetometer data bytes * which is to be parsed from the FIFO data * @param fifo : Structure instance of bma4_fifo_frame. * @param dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t unpack_mag_data(const struct bma4_mag *mag_data, uint16_t start_idx, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev); /*! * @brief This API is used to parse and store the sensor time from the * FIFO data in the structure instance dev. * * @param[in,out] data_index : Index of the FIFO data which * has the sensor time. * @param[in,out] fifo : Structure instance of bma4_fifo_frame. * */ static void unpack_sensortime_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo); /*! * @brief This API is used to parse and store the skipped_frame_count from * the FIFO data in the structure instance dev. * * @param[in,out] data_index : Index of the FIFO data which * has the skipped frame count. * @param[in,out] fifo : Structure instance of bma4_fifo_frame. * */ static void unpack_skipped_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo); /*! * @brief This API is used to parse and store the dropped_frame_count from * the FIFO data in the structure instance dev. * * @param[in,out] data_index : Index of the FIFO data which * has the dropped frame data. * @param[in,out] fifo : Structure instance of bma4_fifo_frame. * */ static void unpack_dropped_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo); /*! * @brief This API is used to move the data index ahead of the * current_frame_length parameter when unnecessary FIFO data appears while * extracting the user specified data. * * @param[in,out] data_index : Index of the FIFO data which * is to be moved ahead of the * current_frame_length * @param[in] current_frame_length : Number of bytes in a particular frame * @param[in] fifo : Structure instance of bma4_fifo_frame. * */ static void move_next_frame(uint16_t *data_index, uint8_t current_frame_length, const struct bma4_fifo_frame *fifo); /*! * @brief This API writes the config stream data in memory using burst mode * * @param[in] stream_data : Pointer to store data of 32 bytes * @param[in] index : Represents value in multiple of 32 bytes * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t stream_transfer_write(const uint8_t *stream_data, uint16_t index, struct bma4_dev *dev); /*! * @brief This API enables or disables the Accel self-test feature in the * sensor. * * @param[in] accel_self-test_enable : Variable used to enable or disable * the Accel self-test feature * Value | Description * --------|--------------- * 0x00 | BMA4_DISABLE * 0x01 | BMA4_ENABLE * * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t set_accel_selftest_enable(uint8_t accel_selftest_axis, struct bma4_dev *dev); /*! * @brief This API selects the sign of Accel self-test excitation * * @param[in] accel_selftest_sign: Variable used to select the Accel * self-test sign * Value | Description * --------|-------------------------- * 0x00 | BMA4_DISABLE (negative) * 0x01 | BMA4_ENABLE (positive) * * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t set_accel_selftest_sign(uint8_t accel_selftest_sign, struct bma4_dev *dev); /*! * @brief This API sets the Accel self-test amplitude in the sensor. * * @param[in] accel_selftest_amp : Variable used to specify the Accel self * test amplitude * Value | Description * --------|------------------------------------ * 0x00 | BMA4_SELFTEST_AMP_LOW * 0x01 | BMA4_SELFTEST_AMP_HIGH * * @param[in] dev : structure instance of bma4_dev * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t set_accel_selftest_amp(uint8_t accel_selftest_amp, struct bma4_dev *dev); /*! * @brief This function enables and configures the Accel which is needed * for self-test operation. * * @param[in] dev : Structure instance of bma4_dev * * @return results of self-test * @retval 0 -> Success * @retval < 0 -> Fail * */ static int8_t set_accel_selftest_config(struct bma4_dev *dev); /*! * @brief This function validates the Accel self-test data and decides the * result of self-test operation. * * @param[in] accel_data_diff : Pointer to structure variable which holds * the Accel data difference of self-test operation * @param[in] dev : Structure instance of bma4_dev * * @return results of self-test operation * @retval 0 -> Success * @retval Any non zero value -> Fail * */ static int8_t validate_selftest(const struct bma4_selftest_delta_limit *accel_data_diff, const struct bma4_dev *dev); /*! * @brief This API converts lsb value of axes to mg for self-test * * @param[in] accel_data_diff : Pointer variable used to pass accel difference * values in g * @param[out] accel_data_diff_mg : Pointer variable used to store accel * difference values in mg * @param[out] dev : Structure instance of bma4_dev * */ static void convert_lsb_g(const struct bma4_selftest_delta_limit *accel_data_diff, struct bma4_selftest_delta_limit *accel_data_diff_mg, const struct bma4_dev *dev); /*! * @brief This API sets the feature config. data start address in the sensor. * * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t set_feature_config_start_addr(struct bma4_dev *dev); /*! * @brief This API increments the feature config. data address according to the user * provided read/write length in the dev structure. * * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t increment_feature_config_addr(struct bma4_dev *dev); /*! * @brief This API reads the 8-bit data from the given register * in the sensor. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t read_regs(uint8_t addr, uint8_t *data, uint32_t len, struct bma4_dev *dev); /*! * @brief This API writes the 8-bit data to the given register * in the sensor. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t write_regs(uint8_t addr, const uint8_t *data, uint32_t len, struct bma4_dev *dev); /*! * @brief This API sets the feature config. data start address in the sensor. * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t get_feature_config_start_addr(struct bma4_dev *dev); /*! * @brief This API is used to calculate the power of given * base value. * * @param[in] base : value of base * @param[in] resolution : resolution of the sensor * * @return : Return the value of base^resolution */ static int32_t power(int16_t base, uint8_t resolution); /*! * @brief This API finds the the null error of the device pointer structure * * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * @retval BMA4_OK -> Success * @retval BMA4_E_NULL_PTR -> Null pointer Error */ static int8_t null_pointer_check(const struct bma4_dev *dev); /*! * @brief This internal API brings up the secondary interface to access * auxiliary sensor * * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t set_aux_interface_config(struct bma4_dev *dev); /*! * @brief This internal API reads the data from the auxiliary sensor * depending on burst length configured * * @param[in] dev : Structure instance of bma4_dev. * @param[out] aux_data : Pointer variable to store data read * @param[in] aux_reg_addr : Variable to pass address from where * data is to be read * * @return Result of API execution status * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t extract_aux_data(uint8_t aux_reg_addr, uint8_t *aux_data, uint16_t len, struct bma4_dev *dev); /*! * @brief This internal API maps the actual burst read length with user length set. * * @param[in] dev : Structure instance of bma4_dev. * @param[out] len : Pointer variable to store mapped length * * @return Result of API execution status * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t map_read_len(uint8_t *len, const struct bma4_dev *dev); /*! * @brief This internal API validates accel self-test status from positive and negative axes input * * @param[in] positive : Positive accel data. * @param[in] negative : Negative accel data. * @param[in/out] accel_data_diff_mg : accel data difference data between positive and negative in mg. * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @return Result of API execution status * @retval 0 -> Success * @retval < 0 -> Fail */ static int8_t get_accel_data_difference_and_validate(struct bma4_accel positive, struct bma4_accel negative, struct bma4_selftest_delta_limit *accel_data_diff_mg, const struct bma4_dev *dev); /*! * @brief This internal API is used to verify the right position of the sensor before doing accel FOC * * @param[in] accel_en : Variable to store status of accel * @param[in] accel_g_axis : Accel FOC axis and sign input * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @retval BMA4_OK - Success. * @retval BMA4_E_NULL_PTR - Error: Null pointer error */ static int8_t verify_foc_position(uint8_t accel_en, const struct bma4_accel_foc_g_value *accel_g_axis, struct bma4_dev *dev); /*! * @brief This internal API reads and provides average for 128 samples of sensor data for accel FOC operation * * @param[in] accel_en : Variable to store status of accel * @param[in] temp_foc_data : Store data samples. * @param[in] bma4_dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @retval BMA4_OK * @retval BMA4_E_NULL_PTR - Error: Null pointer error */ static int8_t get_average_of_sensor_data(uint8_t accel_en, struct bma4_foc_temp_value *temp_foc_data, struct bma4_dev *dev); /*! * @brief This internal API validates accel FOC position as per the range * * @param[in] accel_en : Variable to store status of accel * @param[in] accel_g_axis : Accel axis to FOC * @param[in] avg_foc_data : Average value of sensor sample datas * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @retval BMA4_OK - Success. * @retval BMA4_E_FAIL - Fail. */ static int8_t validate_foc_position(uint8_t accel_en, const struct bma4_accel_foc_g_value *accel_g_axis, struct bma4_accel avg_foc_data, struct bma4_dev *dev); /*! * @brief This internal API validates accel FOC axis given as input * * @param[in] avg_foc_data : Average value of sensor sample datas * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @retval BMA4_OK - Success. * @retval BMA4_E_FOC_FAIL - Error: FOC fail */ static int8_t validate_foc_accel_axis(int16_t avg_foc_data, struct bma4_dev *dev); /*! * @brief This internal API saves the configurations before performing FOC. * * @param[out] acc_cfg : Accelerometer configuration value * @param[out] aps : Advance power mode value * @param[out] acc_en : Accelerometer enable value * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval BMA4_OK - Success. * @retval BMA4_E_COM_FAIL - Error: Communication fail * @retval BMA4_E_INVALID_SENSOR - Error: Invalid sensor */ static int8_t save_accel_foc_config(struct bma4_accel_config *acc_cfg, uint8_t *aps, uint8_t *acc_en, struct bma4_dev *dev); /*! * @brief This internal API sets configurations for performing accelerometer FOC. * * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval BMA4_OK - Success. * @retval BMA4_E_COM_FAIL - Error: Communication fail * @retval BMA4_E_INVALID_SENSOR - Error: Invalid sensor */ static int8_t set_accel_foc_config(struct bma4_dev *dev); /*! * @brief This internal API enables/disables the offset compensation for * filtered and un-filtered accelerometer data. * * @param[in] offset_en : Enables/Disables offset compensation. * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval BMA4_OK - Success. * @retval BMA4_E_COM_FAIL - Error: Communication fail */ static int8_t set_bma4_accel_offset_comp(uint8_t offset_en, struct bma4_dev *dev); /*! * @brief This internal API performs Fast Offset Compensation for accelerometer. * * @param[in] accel_g_value : This parameter selects the accel FOC * axis to be performed * * Input format is {x, y, z, sign}. '1' to enable. '0' to disable * * Eg:- To choose x axis {1, 0, 0, 0} * Eg:- To choose -x axis {1, 0, 0, 1} * * @param[in] acc_cfg : Accelerometer configuration value * @param[in] dev : Structure instance of bma4_dev. * * @return Result of API execution status * * @retval BMA4_OK - Success. * @retval BMA4_E_NULL_PTR - Error: Null pointer error * @retval BMA4_E_COM_FAIL - Error: Communication fail */ static int8_t perform_accel_foc(const struct bma4_accel_foc_g_value *accel_g_value, const struct bma4_accel_config *acc_cfg, struct bma4_dev *dev); /*! * @brief This internal API converts the range value into accelerometer * corresponding integer value. * * @param[in] range_in : Input range value. * @param[out] range_out : Stores the integer value of range. * * @return None * @retval None */ static void map_accel_range(uint8_t range_in, uint8_t *range_out); /*! * @brief This internal API compensate the accelerometer data against gravity. * * @param[in] lsb_per_g : LSB value per 1g. * @param[in] g_val : Gravity reference value of all axes. * @param[in] data : Accelerometer data * @param[out] comp_data : Stores the data that is compensated by taking the * difference in accelerometer data and lsb_per_g * value. * * @return None * @retval None */ static void comp_for_gravity(uint16_t lsb_per_g, const struct bma4_accel_foc_g_value *g_val, const struct bma4_accel *data, struct bma4_offset_delta *comp_data); /*! * @brief This internal API scales the compensated accelerometer data according * to the offset register resolution. * * @param[in] range : Gravity range of the accelerometer. * @param[out] comp_data : Data that is compensated by taking the * difference in accelerometer data and lsb_per_g * value. * @param[out] data : Stores offset data * * @return None * @retval None */ static void scale_bma4_accel_offset(uint8_t range, const struct bma4_offset_delta *comp_data, struct bma4_accel_offset *data); /*! * @brief This internal API inverts the accelerometer offset data. * * @param[out] offset_data : Stores the inverted offset data * * @return None * @retval None */ static void invert_bma4_accel_offset(struct bma4_accel_offset *offset_data); /*! * @brief This internal API writes the offset data in the offset compensation * register. * * @param[in] offset : Offset data * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval BMA4_OK - Success. * @retval BMA4_E_COM_FAIL - Error: Communication fail */ static int8_t write_bma4_accel_offset(const struct bma4_accel_offset *offset, struct bma4_dev *dev); /*! * @brief This internal API finds the bit position of 3.9mg according to given * range and resolution. * * @param[in] range : Gravity range of the accelerometer. * * @return Result of API execution status * @retval Bit position of 3.9mg */ static int8_t get_bit_pos_3_9mg(uint8_t range); /*! * @brief This internal API restores the configurations saved before performing * accelerometer FOC. * * @param[in] acc_cfg : Accelerometer configuration value * @param[in] aps : Advance power mode value * @param[in] acc_en : Accelerometer enable value * @param[in] dev : Structure instance of bma4_dev * * @return Result of API execution status * @retval BMA4_OK - Success. * @retval BMA4_E_COM_FAIL - Error: Communication fail * @retval BMA4_E_INVALID_SENSOR - Error: Invalid sensor * @retval BMA4_E_SET_APS_FAIL - Error: Set Advance Power Save Fail */ static int8_t restore_accel_foc_config(const struct bma4_accel_config *acc_cfg, uint8_t aps, uint8_t acc_en, struct bma4_dev *dev); /***************************************************************************/ /**\name Extern Declarations ****************************************************************************/ /***************************************************************************/ /**\name Globals ****************************************************************************/ /***************************************************************************/ /**\name Function definitions ****************************************************************************/ /*! * @brief This API is the entry point. * Call this API before using all other APIs. * This API reads the chip-id of the sensor which is the first step to * verify the sensor and also it configures the read mechanism of SPI and * I2C interface. */ int8_t bma4_init(struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; uint8_t dummy_read = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (dev->intf == BMA4_SPI_INTF) { dev->dummy_byte = 1; rslt = bma4_read_regs(BMA4_CHIP_ID_ADDR, &dummy_read, 1, dev); } else { dev->dummy_byte = 0; } if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_CHIP_ID_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* Assign Chip Id */ dev->chip_id = data; } } } return rslt; } /*! * @brief This API is used to write the binary configuration in the sensor */ int8_t bma4_write_config_file(struct bma4_dev *dev) { int8_t rslt; /* Config loading disable*/ uint8_t config_load = 0; uint16_t index = 0; uint8_t config_stream_status = 0; /* Disable advanced power save */ rslt = bma4_set_advance_power_save(BMA4_DISABLE, dev); /* Wait for sensor time synchronization. Refer the data-sheet for * more information */ dev->delay_us(450, dev->intf_ptr); if (rslt == BMA4_OK) { /* Disable config loading*/ rslt = bma4_write_regs(BMA4_INIT_CTRL_ADDR, &config_load, 1, dev); if (rslt == BMA4_OK) { /* Write the config stream */ for (index = 0; index < dev->config_size; index += dev->read_write_len) { rslt = stream_transfer_write((dev->config_file_ptr + index), index, dev); } if (rslt == BMA4_OK) { /* Enable config loading and FIFO mode */ config_load = 0x01; rslt = bma4_write_regs(BMA4_INIT_CTRL_ADDR, &config_load, 1, dev); if (rslt == BMA4_OK) { /* Wait till ASIC is initialized. Refer the data-sheet for * more information */ dev->delay_us(BMA4_MS_TO_US(150), dev->intf_ptr); /* Read the status of config stream operation */ rslt = bma4_read_regs(BMA4_INTERNAL_STAT, &config_stream_status, 1, dev); config_stream_status = config_stream_status & BMA4_CONFIG_STREAM_MESSAGE_MSK; if (rslt == BMA4_OK) { if (config_stream_status != BMA4_ASIC_INITIALIZED) { rslt = BMA4_E_CONFIG_STREAM_ERROR; } else { /* Enable advanced power save */ rslt = bma4_set_advance_power_save(BMA4_ENABLE, dev); if (rslt == BMA4_OK) { rslt = get_feature_config_start_addr(dev); } } } } } } } return rslt; } /*! * @brief This API checks whether the write operation requested is for feature * config or register write and accordingly writes the data in the sensor. */ int8_t bma4_write_regs(uint8_t addr, const uint8_t *data, uint32_t len, struct bma4_dev *dev) { uint8_t i; uint32_t loop_count; uint16_t overflow; uint16_t index; int8_t rslt; uint8_t adv_pwr_save = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data != NULL)) { if (addr == BMA4_FEATURE_CONFIG_ADDR) { /* Disable APS if enabled before writing the feature * config register */ rslt = bma4_get_advance_power_save(&adv_pwr_save, dev); if ((adv_pwr_save == BMA4_ENABLE) && (rslt == BMA4_OK)) { rslt = bma4_set_advance_power_save(BMA4_DISABLE, dev); /* Wait for sensor time synchronization. Refer * the data-sheet for more information */ dev->delay_us(450, dev->intf_ptr); } if (((len % 2) == 0) && (len <= dev->feature_len) && (rslt == BMA4_OK)) { if (dev->read_write_len < len) { /* Calculate the no of writes to be * performed according to the read/write * length */ loop_count = len / dev->read_write_len; overflow = len % dev->read_write_len; index = 0; rslt = set_feature_config_start_addr(dev); if (rslt == BMA4_OK) { for (i = 0; i < loop_count; i++) { rslt = write_regs(BMA4_FEATURE_CONFIG_ADDR, data + index, dev->read_write_len, dev); if (rslt == BMA4_OK) { rslt = increment_feature_config_addr(dev); if (rslt == BMA4_OK) { index = index + dev->read_write_len; } } } if ((overflow) && (rslt == BMA4_OK)) { rslt = write_regs(BMA4_FEATURE_CONFIG_ADDR, data + index, overflow, dev); } if (rslt == BMA4_OK) { rslt = set_feature_config_start_addr(dev); } } } else { rslt = write_regs(BMA4_FEATURE_CONFIG_ADDR, data, len, dev); } } else { rslt = BMA4_E_RD_WR_LENGTH_INVALID; } if (rslt == BMA4_OK) { /* Enable APS if previously enabled */ if (adv_pwr_save == BMA4_ENABLE) { rslt = bma4_set_advance_power_save(BMA4_ENABLE, dev); /* Wait for sensor time synchronization. * Refer the data-sheet for more * information */ dev->delay_us(450, dev->intf_ptr); } } } else { rslt = write_regs(addr, data, len, dev); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @cond DOXYGEN_SUPRESS */ /* Suppressing doxygen warnings triggered for same static function names present across various sensor variant * directories */ /*! * @brief This API writes the 8-bit data to the given register * in the sensor. */ static int8_t write_regs(uint8_t addr, const uint8_t *data, uint32_t len, struct bma4_dev *dev) { int8_t rslt; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data != NULL)) { if (dev->intf == BMA4_SPI_INTF) { addr = addr & BMA4_SPI_WR_MASK; } /* write data in the register*/ dev->intf_rslt = dev->bus_write(addr, data, len, dev->intf_ptr); if (dev->intf_rslt == BMA4_INTF_RET_SUCCESS) { /* After write operation 2us delay is required when device operates in performance mode whereas 450us * is required when the device operates in suspend and low power mode. * NOTE: For more information refer datasheet section 6.6 */ if (dev->perf_mode_status == BMA4_ENABLE) { dev->delay_us(2, dev->intf_ptr); } else { dev->delay_us(450, dev->intf_ptr); } } else { rslt = BMA4_E_COM_FAIL; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the feature config. data start address in the sensor. */ static int8_t get_feature_config_start_addr(struct bma4_dev *dev) { int8_t rslt; uint8_t asic_lsb = 0; uint8_t asic_msb = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = read_regs(BMA4_RESERVED_REG_5B_ADDR, &asic_lsb, 1, dev); if (rslt == BMA4_OK) { rslt = read_regs(BMA4_RESERVED_REG_5C_ADDR, &asic_msb, 1, dev); } if (rslt == BMA4_OK) { /* Store asic info in dev structure */ dev->asic_data.asic_lsb = asic_lsb & 0x0F; dev->asic_data.asic_msb = asic_msb; } } return rslt; } /*! * @brief This API sets the feature config. data start address in the sensor. */ static int8_t set_feature_config_start_addr(struct bma4_dev *dev) { int8_t rslt; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = write_regs(BMA4_RESERVED_REG_5B_ADDR, &dev->asic_data.asic_lsb, 1, dev); if (rslt == BMA4_OK) { rslt = write_regs(BMA4_RESERVED_REG_5C_ADDR, &dev->asic_data.asic_msb, 1, dev); } } return rslt; } /*! * @brief This API increments the feature config. data address according to the user * provided read/write length in the dev structure. */ static int8_t increment_feature_config_addr(struct bma4_dev *dev) { int8_t rslt; uint16_t asic_addr; uint8_t asic_lsb = 0; uint8_t asic_msb = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Read the asic address from the sensor */ rslt = read_regs(BMA4_RESERVED_REG_5B_ADDR, &asic_lsb, 1, dev); if (rslt == BMA4_OK) { rslt = read_regs(BMA4_RESERVED_REG_5C_ADDR, &asic_msb, 1, dev); } else { rslt = BMA4_E_COM_FAIL; } if (rslt == BMA4_OK) { /* Get the asic address */ asic_addr = (asic_msb << 4) | (asic_lsb & 0x0F); /* Sum the asic address with read/write length after converting from * byte to word */ asic_addr = asic_addr + (dev->read_write_len / 2); /* Split the asic address */ asic_lsb = asic_addr & 0x0F; asic_msb = (uint8_t)(asic_addr >> 4); /* Write the asic address in the sensor */ rslt = write_regs(BMA4_RESERVED_REG_5B_ADDR, &asic_lsb, 1, dev); if (rslt == BMA4_OK) { rslt = write_regs(BMA4_RESERVED_REG_5C_ADDR, &asic_msb, 1, dev); } } else { rslt = BMA4_E_COM_FAIL; } } return rslt; } /*! @endcond */ /*! * @brief This API checks whether the read operation requested is for feature * or register read and accordingly reads the data from the sensor. */ int8_t bma4_read_regs(uint8_t addr, uint8_t *data, uint32_t len, struct bma4_dev *dev) { uint8_t idx; uint32_t loop_count; uint16_t overflow; uint16_t index; int8_t rslt; uint8_t adv_pwr_save = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data != NULL)) { if (addr == BMA4_FEATURE_CONFIG_ADDR) { /* Disable APS if enabled before reading the feature * config register */ rslt = bma4_get_advance_power_save(&adv_pwr_save, dev); if (adv_pwr_save == BMA4_ENABLE) { rslt = bma4_set_advance_power_save(BMA4_DISABLE, dev); /* Wait for sensor time synchronization. Refer * the data-sheet for more information */ dev->delay_us(450, dev->intf_ptr); } if (((len % 2) == 0) && (len <= dev->feature_len) && (rslt == BMA4_OK)) { if (dev->read_write_len < len) { /* Calculate the no of writes to be * performed according to the read/write * length */ loop_count = len / dev->read_write_len; overflow = len % dev->read_write_len; index = 0; rslt = set_feature_config_start_addr(dev); for (idx = 0; idx < loop_count; idx++) { rslt = read_regs(BMA4_FEATURE_CONFIG_ADDR, data + index, dev->read_write_len, dev); if (rslt == BMA4_OK) { rslt = increment_feature_config_addr(dev); if (rslt == BMA4_OK) { index = index + dev->read_write_len; } } } if ((overflow) && (rslt == BMA4_OK)) { rslt = read_regs(BMA4_FEATURE_CONFIG_ADDR, data + index, overflow, dev); } if (rslt == BMA4_OK) { rslt = set_feature_config_start_addr(dev); } } else { rslt = read_regs(BMA4_FEATURE_CONFIG_ADDR, data, len, dev); } } else { rslt = BMA4_E_RD_WR_LENGTH_INVALID; } if (rslt == BMA4_OK) { /* Enable APS if previously enabled */ if (adv_pwr_save == BMA4_ENABLE) { rslt = bma4_set_advance_power_save(BMA4_ENABLE, dev); /* Wait for sensor time synchronization. * Refer the data-sheet for more * information */ dev->delay_us(450, dev->intf_ptr); } } } else { rslt = read_regs(addr, data, len, dev); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @cond DOXYGEN_SUPRESS */ /* Suppressing doxygen warnings triggered for same static function names present across various sensor variant * directories */ /*! * @brief This API reads the 8-bit data from the given register * in the sensor. */ static int8_t read_regs(uint8_t addr, uint8_t *data, uint32_t len, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data != NULL)) { /* variable used to return the status of communication result*/ uint32_t temp_len = len + dev->dummy_byte; uint16_t indx; uint8_t temp_buff[temp_len]; if (dev->intf == BMA4_SPI_INTF) { /* SPI mask added */ addr = addr | BMA4_SPI_RD_MASK; } /* Read the data from the register */ dev->intf_rslt = dev->bus_read(addr, temp_buff, temp_len, dev->intf_ptr); if (dev->intf_rslt == BMA4_INTF_RET_SUCCESS) { for (indx = 0; indx < len; indx++) { /* Parsing and storing the valid data */ data[indx] = temp_buff[indx + dev->dummy_byte]; } } else { rslt = BMA4_E_COM_FAIL; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @endcond */ /*! * @brief This API reads the error status from the sensor. */ int8_t bma4_get_error_status(struct bma4_err_reg *err_reg, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (err_reg != NULL)) { /* Read the error codes*/ rslt = bma4_read_regs(BMA4_ERROR_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* Fatal error*/ err_reg->fatal_err = BMA4_GET_BITS_POS_0(data, BMA4_FATAL_ERR); /* Cmd error*/ err_reg->cmd_err = BMA4_GET_BITSLICE(data, BMA4_CMD_ERR); /* User error*/ err_reg->err_code = BMA4_GET_BITSLICE(data, BMA4_ERR_CODE); /* FIFO error*/ err_reg->fifo_err = BMA4_GET_BITSLICE(data, BMA4_FIFO_ERR); /* Mag data ready error*/ err_reg->aux_err = BMA4_GET_BITSLICE(data, BMA4_AUX_ERR); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the sensor status from the sensor. */ int8_t bma4_get_status(uint8_t *status, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (status != NULL)) { /* Read the error codes*/ rslt = bma4_read_regs(BMA4_STATUS_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *status = data; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the Accel data for x,y and z axis from the sensor. * The data units is in LSB format. */ int8_t bma4_read_accel_xyz(struct bma4_accel *accel, struct bma4_dev *dev) { int8_t rslt; uint16_t lsb = 0; uint16_t msb = 0; uint8_t data[BMA4_ACCEL_DATA_LENGTH] = { 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel != NULL)) { rslt = bma4_read_regs(BMA4_DATA_8_ADDR, data, BMA4_ACCEL_DATA_LENGTH, dev); if (rslt == BMA4_OK) { msb = data[1]; lsb = data[0]; /* Accel data x axis */ accel->x = (int16_t)((msb << 8) | lsb); msb = data[3]; lsb = data[2]; /* Accel data y axis */ accel->y = (int16_t)((msb << 8) | lsb); msb = data[5]; lsb = data[4]; /* Accel data z axis */ accel->z = (int16_t)((msb << 8) | lsb); if (dev->resolution == BMA4_12_BIT_RESOLUTION) { accel->x = (accel->x / 0x10); accel->y = (accel->y / 0x10); accel->z = (accel->z / 0x10); } else if (dev->resolution == BMA4_14_BIT_RESOLUTION) { accel->x = (accel->x / 0x04); accel->y = (accel->y / 0x04); accel->z = (accel->z / 0x04); } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the sensor time of Sensor time gets updated * with every update of data register or FIFO. */ int8_t bma4_get_sensor_time(uint32_t *sensor_time, struct bma4_dev *dev) { int8_t rslt; uint8_t data[BMA4_SENSOR_TIME_LENGTH] = { 0 }; uint8_t msb = 0; uint8_t xlsb = 0; uint8_t lsb = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (sensor_time != NULL)) { rslt = bma4_read_regs(BMA4_SENSORTIME_0_ADDR, data, BMA4_SENSOR_TIME_LENGTH, dev); if (rslt == BMA4_OK) { msb = data[BMA4_SENSOR_TIME_MSB_BYTE]; xlsb = data[BMA4_SENSOR_TIME_XLSB_BYTE]; lsb = data[BMA4_SENSOR_TIME_LSB_BYTE]; *sensor_time = (uint32_t)((msb << 16) | (xlsb << 8) | lsb); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the chip temperature of sensor. * * @note Using a scaling factor of 1000, to obtain integer values, which * at the user end, are used to get accurate temperature value . * BMA4_FAHREN_SCALED = 1.8 * 1000, BMA4_KELVIN_SCALED = 273.15 * 1000 */ int8_t bma4_get_temperature(int32_t *temp, uint8_t temp_unit, struct bma4_dev *dev) { int8_t rslt; uint8_t data[BMA4_TEMP_DATA_SIZE] = { 0 }; int32_t temp_raw_scaled = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (temp != NULL)) { /* Read temperature value from the register */ rslt = bma4_read_regs(BMA4_TEMPERATURE_ADDR, data, BMA4_TEMP_DATA_SIZE, dev); if (rslt == BMA4_OK) { temp_raw_scaled = (int32_t)data[BMA4_TEMP_BYTE] * BMA4_SCALE_TEMP; } /* '0' value read from the register corresponds to 23 degree C */ (*temp) = temp_raw_scaled + (BMA4_OFFSET_TEMP * BMA4_SCALE_TEMP); switch (temp_unit) { case BMA4_DEG: break; case BMA4_FAHREN: /* Temperature in degree Fahrenheit */ (*temp) = (((*temp) / BMA4_SCALE_TEMP) * BMA4_FAHREN_SCALED) + (32 * BMA4_SCALE_TEMP); break; case BMA4_KELVIN: /* Temperature in degree Kelvin */ (*temp) = (*temp) + BMA4_KELVIN_SCALED; break; default: break; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the Output data rate, Bandwidth, perf_mode * and Range of accel. */ int8_t bma4_get_accel_config(struct bma4_accel_config *accel, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel != NULL)) { rslt = bma4_read_regs(BMA4_ACCEL_CONFIG_ADDR, data, BMA4_ACCEL_CONFIG_LENGTH, dev); if (rslt == BMA4_OK) { /* To get the ODR */ accel->odr = BMA4_GET_BITS_POS_0(data[0], BMA4_ACCEL_ODR); /* To get the bandwidth */ accel->bandwidth = BMA4_GET_BITSLICE(data[0], BMA4_ACCEL_BW); /* To get the under sampling mode */ accel->perf_mode = BMA4_GET_BITSLICE(data[0], BMA4_ACCEL_PERFMODE); /* Read the Accel range */ accel->range = BMA4_GET_BITS_POS_0(data[1], BMA4_ACCEL_RANGE); /* Flag bit to store the performance mode status */ dev->perf_mode_status = accel->perf_mode; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the output_data_rate, bandwidth, perf_mode * and range of Accel. */ int8_t bma4_set_accel_config(const struct bma4_accel_config *accel, struct bma4_dev *dev) { int8_t rslt; uint8_t accel_config_data[2] = { 0, 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel != NULL)) { /* check whether the bandwidth and perfmode * settings are valid */ rslt = validate_bandwidth_perfmode(accel->bandwidth, accel->perf_mode); if (rslt == BMA4_OK) { /* check ODR is valid */ rslt = validate_odr(accel->odr); if (rslt == BMA4_OK) { accel_config_data[0] = accel->odr & BMA4_ACCEL_ODR_MSK; accel_config_data[0] |= (uint8_t)(accel->bandwidth << BMA4_ACCEL_BW_POS); accel_config_data[0] |= (uint8_t)(accel->perf_mode << BMA4_ACCEL_PERFMODE_POS); accel_config_data[1] = accel->range & BMA4_ACCEL_RANGE_MSK; /* Flag bit to store the performance mode status */ dev->perf_mode_status = ((accel_config_data[0] & BMA4_ACCEL_PERFMODE_MSK) >> BMA4_ACCEL_PERFMODE_POS); rslt = bma4_write_regs(BMA4_ACCEL_CONFIG_ADDR, &accel_config_data[0], 1, dev); if (rslt == BMA4_OK) { rslt = bma4_write_regs((BMA4_ACCEL_CONFIG_ADDR + 1), &accel_config_data[1], 1, dev); } } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @cond DOXYGEN_SUPRESS */ /* Suppressing doxygen warnings triggered for same static function names present across various sensor variant * directories */ /*! * @brief This API validates the bandwidth and perf_mode * value set by the user. */ static int8_t validate_bandwidth_perfmode(uint8_t bandwidth, uint8_t perf_mode) { int8_t rslt = BMA4_OK; if (perf_mode == BMA4_CONTINUOUS_MODE) { if (bandwidth > BMA4_ACCEL_NORMAL_AVG4) { /* Invalid bandwidth error for continuous mode */ rslt = BMA4_E_OUT_OF_RANGE; } } else if (perf_mode == BMA4_CIC_AVG_MODE) { if (bandwidth > BMA4_ACCEL_RES_AVG128) { /* Invalid bandwidth error for CIC avg. mode */ rslt = BMA4_E_OUT_OF_RANGE; } } else { rslt = BMA4_E_OUT_OF_RANGE; } return rslt; } /*! * @brief This API validates the ODR value set by the user. */ static int8_t validate_odr(uint8_t odr) { int8_t rslt = BMA4_OK; if ((odr < BMA4_OUTPUT_DATA_RATE_0_78HZ) || (odr > BMA4_OUTPUT_DATA_RATE_1600HZ)) { /* If odr is not valid return error */ rslt = BMA4_E_OUT_OF_RANGE; } return rslt; } /*! @endcond */ /*! * @brief This API sets the advance power save mode in the sensor. */ int8_t bma4_set_advance_power_save(uint8_t adv_pwr_save, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITS_POS_0(data, BMA4_ADVANCE_POWER_SAVE, adv_pwr_save); rslt = bma4_write_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API reads the status of advance power save mode * from the sensor. */ int8_t bma4_get_advance_power_save(uint8_t *adv_pwr_save, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (adv_pwr_save != NULL)) { rslt = bma4_read_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *adv_pwr_save = BMA4_GET_BITS_POS_0(data, BMA4_ADVANCE_POWER_SAVE); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the FIFO self wake up functionality in the sensor. */ int8_t bma4_set_fifo_self_wakeup(uint8_t fifo_self_wakeup, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_FIFO_SELF_WAKE_UP, fifo_self_wakeup); rslt = bma4_write_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API gets the status of FIFO self wake up functionality from * the sensor. */ int8_t bma4_get_fifo_self_wakeup(uint8_t *fifo_self_wake_up, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo_self_wake_up != NULL)) { rslt = bma4_read_regs(BMA4_POWER_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *fifo_self_wake_up = BMA4_GET_BITSLICE(data, BMA4_FIFO_SELF_WAKE_UP); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API enables or disables the Accel in the sensor. */ int8_t bma4_set_accel_enable(uint8_t accel_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_ACCEL_ENABLE, accel_en); rslt = bma4_write_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API checks whether Accel is enabled or not in the sensor. */ int8_t bma4_get_accel_enable(uint8_t *accel_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_en != NULL)) { rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *accel_en = BMA4_GET_BITSLICE(data, BMA4_ACCEL_ENABLE); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API is used to enable or disable auxiliary Mag * in the sensor. */ int8_t bma4_set_mag_enable(uint8_t mag_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITS_POS_0(data, BMA4_MAG_ENABLE, mag_en); rslt = bma4_write_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API is used to check whether the auxiliary Mag is enabled * or not in the sensor. */ int8_t bma4_get_mag_enable(uint8_t *mag_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_en != NULL)) { rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_en = BMA4_GET_BITS_POS_0(data, BMA4_MAG_ENABLE); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the SPI interface mode which is set for primary * interface. */ int8_t bma4_get_spi_interface(uint8_t *spi, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (spi != NULL)) { /* Read SPI mode */ rslt = bma4_read_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *spi = BMA4_GET_BITS_POS_0(data, BMA4_CONFIG_SPI3); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API configures the SPI interface Mode for primary interface */ int8_t bma4_set_spi_interface(uint8_t spi, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (spi <= BMA4_MAX_VALUE_SPI3) { /* Write SPI mode */ rslt = bma4_read_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITS_POS_0(data, BMA4_CONFIG_SPI3, spi); rslt = bma4_write_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This API writes the available sensor specific commands * to the sensor. */ int8_t bma4_set_command_register(uint8_t command_reg, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write command register */ rslt = bma4_write_regs(BMA4_CMD_ADDR, &command_reg, 1, dev); } return rslt; } /*! * @brief This API sets the I2C device address of auxiliary sensor */ int8_t bma4_set_i2c_device_addr(struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0, dev_id = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write the auxiliary I2C device address */ rslt = bma4_read_regs(BMA4_AUX_DEV_ID_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { dev_id = BMA4_SET_BITSLICE(data, BMA4_I2C_DEVICE_ADDR, dev->aux_config.aux_dev_addr); rslt = bma4_write_regs(BMA4_AUX_DEV_ID_ADDR, &dev_id, 1, dev); } } return rslt; } /*! * @brief This API sets the register access on MAG_IF[2], MAG_IF[3], * MAG_IF[4] in the sensor. This implies that the DATA registers are * not updated with Mag values automatically. */ int8_t bma4_set_mag_manual_enable(uint8_t mag_manual, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write the Mag manual*/ rslt = bma4_read_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); dev->delay_us(BMA4_GEN_READ_WRITE_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Set the bit of Mag manual enable */ data = BMA4_SET_BITSLICE(data, BMA4_MAG_MANUAL_ENABLE, mag_manual); rslt = bma4_write_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { dev->aux_config.manual_enable = (uint8_t)mag_manual; } } else { /*dev->mag_manual_enable = 0;*/ dev->aux_config.manual_enable = 0; } } return rslt; } /*! * @brief This API checks whether the Mag access is done manually or * automatically in the sensor. * If the Mag access is done through manual mode then Mag data registers * in sensor are not updated automatically. */ int8_t bma4_get_mag_manual_enable(uint8_t *mag_manual, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_manual != NULL)) { /* Read Mag manual */ rslt = bma4_read_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_manual = BMA4_GET_BITSLICE(data, BMA4_MAG_MANUAL_ENABLE); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the I2C interface configuration(if) mode * for auxiliary Mag. */ int8_t bma4_set_aux_if_mode(uint8_t if_mode, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_IF_CONFIG_IF_MODE, if_mode); rslt = bma4_write_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API gets the address of the register of Aux Mag sensor * where the data to be read. */ int8_t bma4_get_mag_read_addr(uint8_t *mag_read_addr, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_read_addr != NULL)) { rslt = bma4_read_regs(BMA4_AUX_RD_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_read_addr = BMA4_GET_BITS_POS_0(data, BMA4_READ_ADDR); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the address of the register of Aux Mag sensor * where the data to be read. */ int8_t bma4_set_mag_read_addr(uint8_t mag_read_addr, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write the Mag read address*/ rslt = bma4_write_regs(BMA4_AUX_RD_ADDR, &mag_read_addr, 1, dev); } return rslt; } /*! * @brief This API gets the Aux Mag write address from the sensor. * Mag write address is where the Mag data will be written. */ int8_t bma4_get_mag_write_addr(uint8_t *mag_write_addr, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_write_addr != NULL)) { rslt = bma4_read_regs(BMA4_AUX_WR_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_write_addr = BMA4_GET_BITS_POS_0(data, BMA4_WRITE_ADDR); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the Aux Mag write address in the sensor. * Mag write address is where the Mag data will be written. */ int8_t bma4_set_mag_write_addr(uint8_t mag_write_addr, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_write_regs(BMA4_AUX_WR_ADDR, &mag_write_addr, 1, dev); } return rslt; } /*! * @brief This API reads the data from the sensor which is written to the * Mag. */ int8_t bma4_get_mag_write_data(uint8_t *mag_write_data, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_write_data != NULL)) { rslt = bma4_read_regs(BMA4_AUX_WR_DATA_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_write_data = BMA4_GET_BITS_POS_0(data, BMA4_WRITE_DATA); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the data in the sensor which in turn will * be written to Mag. */ int8_t bma4_set_mag_write_data(uint8_t mag_write_data, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_write_regs(BMA4_AUX_WR_DATA_ADDR, &mag_write_data, 1, dev); } return rslt; } /*! * @brief This API reads the x,y,z and r axis data from the auxiliary * Mag BMM150/AKM9916 sensor. */ int8_t bma4_read_mag_xyzr(struct bma4_mag_xyzr *mag, struct bma4_dev *dev) { int8_t rslt; uint16_t msb = 0; uint16_t lsb = 0; uint8_t data[BMA4_MAG_XYZR_DATA_LENGTH] = { 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag != NULL)) { rslt = bma4_read_regs(BMA4_DATA_0_ADDR, data, BMA4_MAG_XYZR_DATA_LENGTH, dev); if (rslt == BMA4_OK) { /* Data X */ /* X-axis LSB value shifting */ lsb = BMA4_GET_BITSLICE(data[BMA4_MAG_X_LSB_BYTE], BMA4_DATA_MAG_X_LSB); msb = data[BMA4_MAG_X_MSB_BYTE]; mag->x = (int16_t)((msb << 8) | lsb); mag->x = (mag->x / 0x08); /* Data Y */ /* Y-axis LSB value shifting */ lsb = BMA4_GET_BITSLICE(data[BMA4_MAG_Y_LSB_BYTE], BMA4_DATA_MAG_Y_LSB); msb = data[BMA4_MAG_Y_MSB_BYTE]; mag->y = (int16_t)((msb << 8) | lsb); mag->y = (mag->y / 0x08); /* Data Z */ /* Z-axis LSB value shifting */ lsb = BMA4_GET_BITSLICE(data[BMA4_MAG_Z_LSB_BYTE], BMA4_DATA_MAG_Z_LSB); msb = data[BMA4_MAG_Z_MSB_BYTE]; mag->z = (int16_t)((msb << 8) | lsb); mag->z = (mag->z / 0x02); /* RHall */ /* R-axis LSB value shifting */ lsb = BMA4_GET_BITSLICE(data[BMA4_MAG_R_LSB_BYTE], BMA4_DATA_MAG_R_LSB); msb = data[BMA4_MAG_R_MSB_BYTE]; mag->r = (int16_t)((msb << 8) | lsb); mag->r = (mag->r / 0x04); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the burst data length (1,2,6,8 byte) of auxiliary * Mag sensor. */ int8_t bma4_set_mag_burst(uint8_t mag_burst, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write auxiliary burst mode length*/ rslt = bma4_read_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITS_POS_0(data, BMA4_MAG_BURST, mag_burst); rslt = bma4_write_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API reads the burst data length of Mag set in the sensor. */ int8_t bma4_get_mag_burst(uint8_t *mag_burst, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_burst != NULL)) { /* Write Mag burst mode length*/ rslt = bma4_read_regs(BMA4_AUX_IF_CONF_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *mag_burst = BMA4_GET_BITS_POS_0(data, BMA4_MAG_BURST); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the FIFO data of Accel and/or Mag sensor */ int8_t bma4_read_fifo_data(struct bma4_fifo_frame *fifo, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; uint8_t addr = BMA4_FIFO_DATA_ADDR; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo != NULL)) { /* reset the fifo data structure */ reset_fifo_data_structure(fifo); /* read the fifo data */ rslt = bma4_read_regs(addr, fifo->data, fifo->length, dev); if (rslt == BMA4_OK) { /* read fifo frame content configuration*/ rslt = bma4_read_regs(BMA4_FIFO_CONFIG_1_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* filter fifo header enabled status */ fifo->fifo_header_enable = data & BMA4_FIFO_HEADER; /* filter accel/mag data enabled status */ fifo->fifo_data_enable = data & BMA4_FIFO_M_A_ENABLE; } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API parses and extracts the accelerometer frames from * FIFO data read by the "bma4_read_fifo_data" API and stores it in the * "accel_data" structure instance. */ int8_t bma4_extract_accel(struct bma4_accel *accel_data, uint16_t *accel_length, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { int8_t rslt; uint16_t data_index = 0; uint16_t accel_index = 0; uint16_t data_read_length = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_data != NULL) && (accel_length != NULL) && (fifo != NULL)) { /* Parsing the FIFO data in header-less mode */ if (fifo->fifo_header_enable == 0) { get_accel_len_to_parse(&data_index, &data_read_length, accel_length, fifo); for (; data_index < data_read_length;) { unpack_acc_frm(accel_data, &data_index, &accel_index, fifo->fifo_data_enable, fifo, dev); /*Check for the availability of next * two bytes of FIFO data */ check_empty_fifo(&data_index, fifo); } /* update number of accel data read*/ *accel_length = accel_index; /*update the accel byte index*/ fifo->accel_byte_start_idx = data_index; } else { /* Parsing the FIFO data in header mode */ extract_accel_header_mode(accel_data, accel_length, fifo, dev); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API parses and extracts the magnetometer frames from * FIFO data read by the "bma4_read_fifo_data" API and stores it in the * "mag_data" structure instance parameter of this API */ int8_t bma4_extract_mag(const struct bma4_mag *mag_data, uint16_t *mag_length, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { int8_t rslt; uint16_t data_index = 0; uint16_t mag_index = 0; uint16_t data_read_length = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mag_data != NULL) && (mag_length != NULL) && (fifo != NULL)) { /* Parsing the FIFO data in header-less mode */ if (fifo->fifo_header_enable == 0) { get_mag_len_to_parse(&data_index, &data_read_length, mag_length, fifo); for (; data_index < data_read_length;) { rslt = unpack_mag_frm(mag_data, &data_index, &mag_index, fifo->fifo_data_enable, fifo, dev); /*Check for the availability of next * two bytes of FIFO data */ check_empty_fifo(&data_index, fifo); } /* update number of Aux. sensor data read*/ *mag_length = mag_index; /*update the Aux. sensor frame index*/ fifo->mag_byte_start_idx = data_index; } else { /* Parsing the FIFO data in header mode */ rslt = extract_mag_header_mode(mag_data, mag_length, fifo, dev); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the FIFO water mark level which is set * in the sensor. */ int8_t bma4_get_fifo_wm(uint16_t *fifo_wm, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0, 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo_wm != NULL)) { /* Read the FIFO water mark level*/ rslt = bma4_read_regs(BMA4_FIFO_WTM_0_ADDR, data, BMA4_FIFO_WM_LENGTH, dev); if (rslt == BMA4_OK) { *fifo_wm = (data[1] << 8) | (data[0]); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the FIFO watermark level in the sensor. */ int8_t bma4_set_fifo_wm(uint16_t fifo_wm, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0, 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { data[0] = BMA4_GET_LSB(fifo_wm); data[1] = BMA4_GET_MSB(fifo_wm); /* consecutive write is not possible in suspend mode hence * separate write is used with delay of 1 ms */ /* Write the fifo watermark level*/ rslt = bma4_write_regs(BMA4_FIFO_WTM_0_ADDR, &data[0], 1, dev); if (rslt == BMA4_OK) { dev->delay_us(BMA4_GEN_READ_WRITE_DELAY, dev->intf_ptr); rslt = bma4_write_regs((BMA4_FIFO_WTM_0_ADDR + 1), &data[1], 1, dev); } } return rslt; } /*! * @brief This API checks whether the Accel FIFO data is set for filtered * or unfiltered mode. */ int8_t bma4_get_accel_fifo_filter_data(uint8_t *accel_fifo_filter, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_fifo_filter != NULL)) { /* Read the Accel FIFO filter data */ rslt = bma4_read_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *accel_fifo_filter = BMA4_GET_BITSLICE(data, BMA4_FIFO_FILTER_ACCEL); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the condition of Accel FIFO data either to * filtered or unfiltered mode. */ int8_t bma4_set_accel_fifo_filter_data(uint8_t accel_fifo_filter, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (accel_fifo_filter <= BMA4_MAX_VALUE_FIFO_FILTER) { rslt = bma4_read_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* Write Accel FIFO filter data */ data = BMA4_SET_BITSLICE(data, BMA4_FIFO_FILTER_ACCEL, accel_fifo_filter); rslt = bma4_write_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This API reads the down sampling rates which is configured * for Accel FIFO data. */ int8_t bma4_get_fifo_down_accel(uint8_t *fifo_down, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo_down != NULL)) { /* Read the Accel FIFO down data */ rslt = bma4_read_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *fifo_down = BMA4_GET_BITSLICE(data, BMA4_FIFO_DOWN_ACCEL); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the down-sampling rates for Accel FIFO. */ int8_t bma4_set_fifo_down_accel(uint8_t fifo_down, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Write the Accel FIFO down data */ rslt = bma4_read_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_FIFO_DOWN_ACCEL, fifo_down); rslt = bma4_write_regs(BMA4_FIFO_DOWN_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API reads the length of FIFO data available in the sensor * in the units of bytes. */ int8_t bma4_get_fifo_length(uint16_t *fifo_length, struct bma4_dev *dev) { int8_t rslt; uint8_t index = 0; uint8_t data[BMA4_FIFO_DATA_LENGTH] = { 0, 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo_length != NULL)) { /* Read FIFO length*/ rslt = bma4_read_regs(BMA4_FIFO_LENGTH_0_ADDR, data, BMA4_FIFO_DATA_LENGTH, dev); if (rslt == BMA4_OK) { index = BMA4_FIFO_LENGTH_MSB_BYTE; data[index] = BMA4_GET_BITS_POS_0(data[index], BMA4_FIFO_BYTE_COUNTER_MSB); *fifo_length = ((data[index] << 8) | data[index - 1]); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API aligns and compensates the Mag data of BMM150/AKM9916 * sensor. */ int8_t bma4_second_if_mag_compensate_xyz(struct bma4_mag_fifo_data mag_fifo_data, uint8_t mag_second_if, const struct bma4_mag *compensated_mag_data) { int8_t rslt = BMA4_OK; #ifdef BMM150 int16_t mag_x = 0; int16_t mag_y = 0; int16_t mag_z = 0; uint16_t mag_r = 0; #else /* Suppress Warnings */ (void)(mag_second_if); (void)(mag_fifo_data); #endif if (compensated_mag_data == NULL) { rslt = BMA4_E_NULL_PTR; } #if defined(BMM150) || defined(AKM9916) switch (mag_second_if) { #ifdef BMM150 case BMA4_SEC_IF_BMM150: /* X data*/ mag_x = (int16_t)((mag_fifo_data.mag_x_msb << 8) | (mag_fifo_data.mag_x_lsb)); mag_x = (int16_t) (mag_x / 0x08); /* Y data*/ mag_y = (int16_t)((mag_fifo_data.mag_y_msb << 8) | (mag_fifo_data.mag_y_lsb)); mag_y = (int16_t) (mag_y / 0x08); /* Z data*/ mag_z = (int16_t)((mag_fifo_data.mag_z_msb << 8) | (mag_fifo_data.mag_z_lsb)); mag_z = (int16_t) (mag_z / 0x02); /* R data*/ mag_r = (uint16_t)((mag_fifo_data.mag_r_y2_msb << 8) | (mag_fifo_data.mag_r_y2_lsb)); mag_r = (uint16_t) (mag_r >> 2); /* Compensated Mag x data */ compensated_mag_data->x = bma4_bmm150_mag_compensate_x(mag_x, mag_r); /* Compensated Mag y data */ compensated_mag_data->y = bma4_bmm150_mag_compensate_y(mag_y, mag_r); /* Compensated Mag z data */ compensated_mag_data->z = bma4_bmm150_mag_compensate_z(mag_z, mag_r); break; #endif #ifdef AKM9916 case BMA4_SEC_IF_AKM09916: /* Compensated X data */ compensated_mag_data->x = (int16_t)((mag_fifo_data.mag_x_msb << 8) | (mag_fifo_data.mag_x_lsb)); /* Compensated Y data*/ compensated_mag_data->y = (int16_t)((mag_fifo_data.mag_y_msb << 8) | (mag_fifo_data.mag_y_lsb)); /* Compensated Z data*/ compensated_mag_data->z = (int16_t)((mag_fifo_data.mag_z_msb << 8) | (mag_fifo_data.mag_z_lsb)); break; #endif } #endif return rslt; } /*! * @brief This API reads Mag. x,y and z axis data from either BMM150 or * AKM9916 sensor */ int8_t bma4_read_mag_xyz(const struct bma4_mag *mag, uint8_t sensor_select, const struct bma4_dev *dev) { int8_t rslt; #if defined(AKM9916) || defined(BMM150) uint8_t index; uint16_t msb = 0; uint16_t lsb = 0; uint8_t data[BMA4_MAG_XYZ_DATA_LENGTH] = { 0 }; #else /* Suppress Warnings */ (void)(sensor_select); #endif /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((BMA4_OK != rslt) || (mag == NULL)) { rslt = BMA4_E_NULL_PTR; } else { #if defined(BMM150) || defined(AKM9916) switch (sensor_select) { #ifdef BMM150 case BMA4_SEC_IF_BMM150: rslt = bma4_read_regs(BMA4_DATA_0_ADDR, data, BMA4_MAG_XYZ_DATA_LENGTH, dev); if (rslt == BMA4_OK) { index = BMA4_MAG_X_LSB_BYTE; /*X-axis LSB value shifting*/ data[index] = BMA4_GET_BITSLICE(data[index], BMA4_DATA_MAG_X_LSB); /* Data X */ msb = data[index + 1]; lsb = data[index]; mag->x = (int16_t)((msb << 8) | lsb); mag->x = (mag->x / 0x08); /* Data Y */ /*Y-axis LSB value shifting*/ data[index + 2] = BMA4_GET_BITSLICE(data[index + 2], BMA4_DATA_MAG_Y_LSB); msb = data[index + 3]; lsb = data[index + 2]; mag->y = (int16_t)((msb << 8) | lsb); mag->y = (mag->y / 0x08); /* Data Z */ /*Z-axis LSB value shifting*/ data[index + 4] = BMA4_GET_BITSLICE(data[index + 4], BMA4_DATA_MAG_Z_LSB); msb = data[index + 5]; lsb = data[index + 4]; mag->z = (int16_t)((msb << 8) | lsb); mag->z = (mag->z / 0x02); } break; #endif #ifdef AKM9916 case BMA4_SEC_IF_AKM09916: if (dev->aux_sensor == AKM9916_SENSOR) { rslt = bma4_read_regs(BMA4_DATA_0_ADDR, data, BMA4_MAG_XYZ_DATA_LENGTH, dev); if (rslt == BMA4_OK) { index = BMA4_MAG_X_LSB_BYTE; /* Data X */ msb = data[index + 1]; lsb = data[index]; mag->x = (int16_t)((msb << 8) | lsb); /* Data Y */ msb = data[index + 3]; lsb = data[index + 2]; mag->y = (int32_t)((msb << 8) | lsb); /* Data Z */ msb = data[index + 5]; lsb = data[index + 4]; mag->z = (int16_t)((msb << 8) | lsb); } } break; #endif } #else rslt = BMA4_E_OUT_OF_RANGE; #endif } return rslt; } /*! * @brief This API reads the auxiliary I2C interface configuration which * is set in the sensor. */ int8_t bma4_get_if_mode(uint8_t *if_mode, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (if_mode != NULL)) { /* Read auxiliary interface configuration */ rslt = bma4_read_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *if_mode = BMA4_GET_BITSLICE(data, BMA4_IF_CONFIG_IF_MODE); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the auxiliary interface configuration in the * sensor. */ int8_t bma4_set_if_mode(uint8_t if_mode, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (if_mode <= BMA4_MAX_IF_MODE) { /* Write the interface configuration mode */ rslt = bma4_read_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_IF_CONFIG_IF_MODE, if_mode); rslt = bma4_write_regs(BMA4_IF_CONFIG_ADDR, &data, 1, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This API reads the data ready status of Accel from the sensor. */ int8_t bma4_get_accel_data_rdy(uint8_t *data_rdy, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data_rdy != NULL)) { /*Reads the status of Accel data ready*/ rslt = bma4_read_regs(BMA4_STATUS_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *data_rdy = BMA4_GET_BITSLICE(data, BMA4_STAT_DATA_RDY_ACCEL); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the data ready status of Mag from the sensor. * The status get reset when Mag data register is read. */ int8_t bma4_get_mag_data_rdy(uint8_t *data_rdy, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (data_rdy != NULL)) { /*Reads the status of Accel data ready*/ rslt = bma4_read_regs(BMA4_STATUS_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { *data_rdy = BMA4_GET_BITSLICE(data, BMA4_STAT_DATA_RDY_MAG); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the ASIC status from the sensor. * The status information is mentioned in the below table. */ int8_t bma4_get_asic_status(struct bma4_asic_status *asic_status, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (asic_status != NULL)) { /* Read the Mag I2C device address*/ rslt = bma4_read_regs(BMA4_INTERNAL_ERROR, &data, 1, dev); if (rslt == BMA4_OK) { asic_status->sleep = (data & 0x01); asic_status->irq_ovrn = ((data & 0x02) >> 0x01); asic_status->wc_event = ((data & 0x04) >> 0x02); asic_status->stream_transfer_active = ((data & 0x08) >> 0x03); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API enables the offset compensation for filtered and * unfiltered Accel data. */ int8_t bma4_set_offset_comp(uint8_t offset_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_NV_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* Write Accel FIFO filter data */ data = BMA4_SET_BITSLICE(data, BMA4_NV_ACCEL_OFFSET, offset_en); rslt = bma4_write_regs(BMA4_NV_CONFIG_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API gets the status of Accel offset compensation */ int8_t bma4_get_offset_comp(uint8_t *offset_en, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (offset_en != NULL)) { rslt = bma4_read_regs(BMA4_NV_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { /* Write Accel FIFO filter data */ *offset_en = BMA4_GET_BITSLICE(data, BMA4_NV_ACCEL_OFFSET); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API checks whether the self-test functionality of the sensor * is working or not. * The following parameter of struct bma4_dev, should have the valid value * before performing the self-test, * 1. Variant and 2. Resolution */ int8_t bma4_perform_accel_selftest(int8_t *result, struct bma4_dev *dev) { int8_t rslt; struct bma4_accel positive = { 0, 0, 0 }; struct bma4_accel negative = { 0, 0, 0 }; /*! Structure for difference of accel values in mg */ struct bma4_selftest_delta_limit accel_data_diff_mg = { 0, 0, 0 }; *result = BMA4_SELFTEST_FAIL; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = set_accel_selftest_config(dev); if (rslt == BMA4_OK) { /* Wait for 2ms after accel self-test config please refer data sheet data sheet 4.9. sensor self-test */ dev->delay_us(BMA4_MS_TO_US(2), dev->intf_ptr); rslt = bma4_selftest_config(BMA4_ENABLE, dev); if (rslt == BMA4_OK) { /* Taking positive data */ /* User should wait 50ms before interpreting the acceleration data. * please refer data sheet 4.9. sensor self-test */ dev->delay_us(BMA4_MS_TO_US(50), dev->intf_ptr); rslt = bma4_read_accel_xyz(&positive, dev); if (rslt == BMA4_OK) { rslt = bma4_selftest_config(BMA4_DISABLE, dev); if (rslt == BMA4_OK) { /* User should wait 50ms before interpreting the acceleration data. * please refer data sheet 4.9. sensor self-test */ dev->delay_us(BMA4_MS_TO_US(50), dev->intf_ptr); rslt = bma4_read_accel_xyz(&negative, dev); if (rslt == BMA4_OK) { rslt = *result = get_accel_data_difference_and_validate(positive, negative, &accel_data_diff_mg, dev); if (rslt == BMA4_OK) { /* Triggers a soft reset */ rslt = bma4_soft_reset(dev); dev->delay_us(BMA4_MS_TO_US(200), dev->intf_ptr); } } } } } } } return rslt; } /*! @cond DOXYGEN_SUPRESS */ /* Suppressing doxygen warnings triggered for same static function names present across various sensor variant * directories */ /*! * @brief This Internal API validates accel self-test status from positive and negative axes input */ static int8_t get_accel_data_difference_and_validate(struct bma4_accel positive, struct bma4_accel negative, struct bma4_selftest_delta_limit *accel_data_diff_mg, const struct bma4_dev *dev) { int8_t rslt; /*! Structure for difference of accel values in g */ struct bma4_selftest_delta_limit accel_data_diff = { 0, 0, 0 }; accel_data_diff.x = ABS(positive.x - negative.x); accel_data_diff.y = ABS(positive.y - negative.y); accel_data_diff.z = ABS(positive.z - negative.z); /*! Converting LSB of the differences of accel values to mg */ convert_lsb_g(&accel_data_diff, accel_data_diff_mg, dev); /*! Validating self-test for accel values in mg */ rslt = validate_selftest(accel_data_diff_mg, dev); return rslt; } /*! @endcond */ /*! * @brief This API performs the steps needed for self-test operation * before reading the Accel self-test data. */ int8_t bma4_selftest_config(uint8_t sign, struct bma4_dev *dev) { int8_t rslt; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = set_accel_selftest_enable(BMA4_ENABLE, dev); if (rslt == BMA4_OK) { rslt = set_accel_selftest_sign(sign, dev); if (rslt == BMA4_OK) { /* Set self-test amplitude based on variant */ switch (dev->variant) { case BMA42X_VARIANT: /* Set self-test amplitude to high for BMA42x */ rslt = set_accel_selftest_amp(BMA4_ENABLE, dev); break; case BMA45X_VARIANT: /* Set self-test amplitude to low for BMA45x */ rslt = set_accel_selftest_amp(BMA4_DISABLE, dev); break; default: rslt = BMA4_E_INVALID_SENSOR; break; } } } } return rslt; } /*! * @brief API sets the interrupt to either interrupt1 or * interrupt2 pin in the sensor. */ int8_t bma4_map_interrupt(uint8_t int_line, uint16_t int_map, uint8_t enable, struct bma4_dev *dev) { int8_t rslt; uint8_t data[3] = { 0, 0, 0 }; uint8_t index[2] = { BMA4_INT_MAP_1_ADDR, BMA4_INT_MAP_2_ADDR }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_INT_MAP_1_ADDR, data, 3, dev); if (rslt == BMA4_OK) { if (enable == TRUE) { /* Feature interrupt mapping */ data[int_line] = (uint8_t)(int_map & (0x00FF)); /* Hardware interrupt mapping */ data[2] = (uint8_t)((int_map & (0xFF00)) >> 8); } else { /* Feature interrupt un-mapping */ data[int_line] &= (~(uint8_t)(int_map & (0x00FF))); /* Hardware interrupt un-mapping */ data[2] &= (~(uint8_t)((int_map & (0xFF00)) >> 8)); } rslt = bma4_write_regs(index[int_line], &data[int_line], 1, dev); if (rslt == BMA4_OK) { rslt = bma4_write_regs(BMA4_INT_MAP_DATA_ADDR, &data[2], 1, dev); } } } return rslt; } /*! * @brief This API sets the interrupt mode in the sensor. */ int8_t bma4_set_interrupt_mode(uint8_t mode, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if ((mode == BMA4_NON_LATCH_MODE) || (mode == BMA4_LATCH_MODE)) { rslt = bma4_write_regs(BMA4_INTR_LATCH_ADDR, &mode, 1, dev); } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This API gets the interrupt mode which is set in the sensor. */ int8_t bma4_get_interrupt_mode(uint8_t *mode, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (mode != NULL)) { rslt = bma4_read_regs(BMA4_INTR_LATCH_ADDR, &data, 1, dev); *mode = data; } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API sets the auxiliary Mag(BMM150 or AKM9916) output data * rate and offset. */ int8_t bma4_set_aux_mag_config(const struct bma4_aux_mag_config *aux_mag, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (aux_mag != NULL)) { if ((aux_mag->odr >= BMA4_OUTPUT_DATA_RATE_0_78HZ) && (aux_mag->odr <= BMA4_OUTPUT_DATA_RATE_1600HZ) && ((aux_mag->offset & BMA4_MAG_CONFIG_OFFSET_MSK) == 0x00)) { data = (uint8_t)(aux_mag->odr | ((aux_mag->offset << BMA4_MAG_CONFIG_OFFSET_POS))); rslt = bma4_write_regs(BMA4_AUX_CONFIG_ADDR, &data, 1, dev); } else { rslt = BMA4_E_OUT_OF_RANGE; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the auxiliary Mag(BMM150 or AKM9916) output data * rate and offset. */ int8_t bma4_get_aux_mag_config(struct bma4_aux_mag_config *aux_mag, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (aux_mag != NULL)) { rslt = bma4_read_regs(BMA4_AUX_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { aux_mag->odr = (data & 0x0F); aux_mag->offset = (data & BMA4_MAG_CONFIG_OFFSET_MSK) >> 4; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @brief This API sets the FIFO configuration in the sensor. */ int8_t bma4_set_fifo_config(uint8_t config, uint8_t enable, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0, 0 }; uint8_t fifo_config_0 = config & BMA4_FIFO_CONFIG_0_MASK; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { rslt = bma4_read_regs(BMA4_FIFO_CONFIG_0_ADDR, data, BMA4_FIFO_CONFIG_LENGTH, dev); if (rslt == BMA4_OK) { if (fifo_config_0 > 0) { if (enable == TRUE) { data[0] = data[0] | fifo_config_0; } else { data[0] = data[0] & (~fifo_config_0); } } if (enable == TRUE) { data[1] = data[1] | (config & BMA4_FIFO_CONFIG_1_MASK); } else { data[1] = data[1] & (~(config & BMA4_FIFO_CONFIG_1_MASK)); } /* Burst write is not possible in suspend mode hence * separate write is used with delay of 1 ms */ rslt = bma4_write_regs(BMA4_FIFO_CONFIG_0_ADDR, &data[0], 1, dev); if (rslt == BMA4_OK) { dev->delay_us(BMA4_GEN_READ_WRITE_DELAY, dev->intf_ptr); rslt = bma4_write_regs((BMA4_FIFO_CONFIG_0_ADDR + 1), &data[1], 1, dev); } } } return rslt; } /*! @brief This API reads the FIFO configuration from the sensor. */ int8_t bma4_get_fifo_config(uint8_t *fifo_config, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0, 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (fifo_config != NULL)) { rslt = bma4_read_regs(BMA4_FIFO_CONFIG_0_ADDR, data, BMA4_FIFO_CONFIG_LENGTH, dev); if (rslt == BMA4_OK) { *fifo_config = ((uint8_t)((data[0] & BMA4_FIFO_CONFIG_0_MASK) | (data[1]))); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @brief This function sets the electrical behaviour of interrupt pin1 or * pin2 in the sensor. */ int8_t bma4_set_int_pin_config(const struct bma4_int_pin_config *int_pin_config, uint8_t int_line, struct bma4_dev *dev) { int8_t rslt; uint8_t interrupt_address_array[2] = { BMA4_INT1_IO_CTRL_ADDR, BMA4_INT2_IO_CTRL_ADDR }; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (int_pin_config != NULL)) { if (int_line <= 1) { data = ((uint8_t)((int_pin_config->edge_ctrl & BMA4_INT_EDGE_CTRL_MASK) | ((int_pin_config->lvl << 1) & BMA4_INT_LEVEL_MASK) | ((int_pin_config->od << 2) & BMA4_INT_OPEN_DRAIN_MASK) | ((int_pin_config->output_en << 3) & BMA4_INT_OUTPUT_EN_MASK) | ((int_pin_config->input_en << 4) & BMA4_INT_INPUT_EN_MASK))); rslt = bma4_write_regs(interrupt_address_array[int_line], &data, 1, dev); } else { rslt = BMA4_E_INT_LINE_INVALID; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! @brief This API reads the electrical behavior of interrupt pin1 or pin2 * from the sensor. */ int8_t bma4_get_int_pin_config(struct bma4_int_pin_config *int_pin_config, uint8_t int_line, struct bma4_dev *dev) { int8_t rslt; uint8_t interrupt_address_array[2] = { BMA4_INT1_IO_CTRL_ADDR, BMA4_INT2_IO_CTRL_ADDR }; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (int_pin_config != NULL)) { if (int_line <= 1) { rslt = bma4_read_regs(interrupt_address_array[int_line], &data, 1, dev); /* Assign interrupt configurations to the * structure members */ if (rslt == BMA4_OK) { int_pin_config->edge_ctrl = data & BMA4_INT_EDGE_CTRL_MASK; int_pin_config->lvl = ((data & BMA4_INT_LEVEL_MASK) >> BMA4_INT_LEVEL_POS); int_pin_config->od = ((data & BMA4_INT_OPEN_DRAIN_MASK) >> BMA4_INT_OPEN_DRAIN_POS); int_pin_config->output_en = ((data & BMA4_INT_OUTPUT_EN_MASK) >> BMA4_INT_OUTPUT_EN_POS); int_pin_config->input_en = ((data & BMA4_INT_INPUT_EN_MASK) >> BMA4_INT_INPUT_EN_POS); } } else { rslt = BMA4_E_INT_LINE_INVALID; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the Feature and Hardware interrupt status from the sensor. */ int8_t bma4_read_int_status(uint16_t *int_status, struct bma4_dev *dev) { int8_t rslt; uint8_t data[2] = { 0 }; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (int_status != NULL)) { rslt = bma4_read_regs(BMA4_INT_STAT_0_ADDR, data, 2, dev); if (rslt == BMA4_OK) { *int_status = data[0]; *((uint8_t *)int_status + 1) = data[1]; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the Feature interrupt status from the sensor. */ int8_t bma4_read_int_status_0(uint8_t *int_status_0, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (int_status_0 != NULL)) { rslt = bma4_read_regs(BMA4_INT_STAT_0_ADDR, int_status_0, 1, dev); } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API reads the Hardware interrupt status from the sensor. */ int8_t bma4_read_int_status_1(uint8_t *int_status_1, struct bma4_dev *dev) { int8_t rslt; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (int_status_1 != NULL)) { rslt = bma4_read_regs(BMA4_INT_STAT_1_ADDR, int_status_1, 1, dev); } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API initializes the auxiliary interface to access * auxiliary sensor */ int8_t bma4_aux_interface_init(struct bma4_dev *dev) { /* Variable to return error codes */ int8_t rslt; /* Check for Null pointer error */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Set the auxiliary sensor configuration */ rslt = set_aux_interface_config(dev); if (rslt != BMA4_OK) { rslt = BMA4_E_AUX_CONFIG_FAIL; } } return rslt; } /*! * @brief This API reads the data from the auxiliary sensor */ int8_t bma4_aux_read(uint8_t aux_reg_addr, uint8_t *aux_data, uint16_t len, struct bma4_dev *dev) { /* Variable to return error codes */ int8_t rslt; /* Check for Null pointer error */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (aux_data != NULL)) { /* Read the data from the data register in terms of * user defined length */ rslt = extract_aux_data(aux_reg_addr, aux_data, len, dev); } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API writes the data into the auxiliary sensor */ int8_t bma4_aux_write(uint8_t aux_reg_addr, const uint8_t *aux_data, uint16_t len, struct bma4_dev *dev) { int8_t rslt; /* Check for Null pointer error */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (aux_data != NULL)) { /* Write data in terms of user defined length */ if (len > 0) { while (len--) { /* First set data to write */ rslt = bma4_write_regs(BMA4_AUX_WR_DATA_ADDR, aux_data, 1, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Then set address to write */ rslt = bma4_write_regs(BMA4_AUX_WR_ADDR, &aux_reg_addr, 1, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); /* Increment data array and register * address until user-defined length is * greater than 0 */ if ((rslt == BMA4_OK) && (len > 0)) { aux_data++; aux_reg_addr++; } } else { rslt = BMA4_E_COM_FAIL; } } } else { rslt = BMA4_E_RD_WR_LENGTH_INVALID; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*****************************************************************************/ /*! @cond DOXYGEN_SUPRESS */ /* Suppressing doxygen warnings triggered for same static function names present across various sensor variant * directories */ /* Static function definition */ /*! * @brief This API converts lsb value of axes to mg for self-test * */ static void convert_lsb_g(const struct bma4_selftest_delta_limit *accel_data_diff, struct bma4_selftest_delta_limit *accel_data_diff_mg, const struct bma4_dev *dev) { uint32_t lsb_per_g; /*! Range considered for self-test is 8g */ uint8_t range = 8; /*! lsb_per_g for the respective resolution and 8g range*/ lsb_per_g = (uint32_t)(power(2, dev->resolution) / (2 * range)); /*! accel x value in mg */ accel_data_diff_mg->x = (accel_data_diff->x / (int32_t)lsb_per_g) * 1000; /*! accel y value in mg */ accel_data_diff_mg->y = (accel_data_diff->y / (int32_t)lsb_per_g) * 1000; /*! accel z value in mg */ accel_data_diff_mg->z = (accel_data_diff->z / (int32_t)lsb_per_g) * 1000; } /*! * @brief This API writes the config stream data in memory using burst mode * @note index value should be even number. */ static int8_t stream_transfer_write(const uint8_t *stream_data, uint16_t index, struct bma4_dev *dev) { int8_t rslt; uint8_t asic_msb = (uint8_t)((index / 2) >> 4); uint8_t asic_lsb = ((index / 2) & 0x0F); /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (stream_data != NULL)) { rslt = bma4_write_regs(BMA4_RESERVED_REG_5B_ADDR, &asic_lsb, 1, dev); if (rslt == BMA4_OK) { rslt = bma4_write_regs(BMA4_RESERVED_REG_5C_ADDR, &asic_msb, 1, dev); if (rslt == BMA4_OK) { rslt = write_regs(BMA4_FEATURE_CONFIG_ADDR, (uint8_t *)stream_data, dev->read_write_len, dev); } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This API enables or disables the Accel self-test feature in the * sensor. */ static int8_t set_accel_selftest_enable(uint8_t accel_selftest_enable, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Read the self-test register */ rslt = bma4_read_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITS_POS_0(data, BMA4_ACCEL_SELFTEST_ENABLE, accel_selftest_enable); rslt = bma4_write_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This API selects the sign of Accel self-test excitation. */ static int8_t set_accel_selftest_sign(uint8_t accel_selftest_sign, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (accel_selftest_sign <= BMA4_MAX_VALUE_SELFTEST_SIGN) { /* Read the Accel self-test sign*/ rslt = bma4_read_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_ACCEL_SELFTEST_SIGN, accel_selftest_sign); rslt = bma4_write_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This API sets the Accel self-test amplitude in the sensor. */ static int8_t set_accel_selftest_amp(uint8_t accel_selftest_amp, struct bma4_dev *dev) { int8_t rslt; uint8_t data = 0; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { if (accel_selftest_amp <= BMA4_MAX_VALUE_SELFTEST_AMP) { /* Write self-test amplitude*/ rslt = bma4_read_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_SELFTEST_AMP, accel_selftest_amp); rslt = bma4_write_regs(BMA4_ACC_SELF_TEST_ADDR, &data, 1, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } return rslt; } /*! * @brief This function enables and configures the Accel which is needed * for self-test operation. */ static int8_t set_accel_selftest_config(struct bma4_dev *dev) { int8_t rslt; struct bma4_accel_config accel = { 0, 0, 0, 0 }; accel.odr = BMA4_OUTPUT_DATA_RATE_1600HZ; accel.bandwidth = BMA4_ACCEL_NORMAL_AVG4; accel.perf_mode = BMA4_ENABLE; accel.range = BMA4_ACCEL_RANGE_8G; rslt = bma4_set_accel_enable(BMA4_ENABLE, dev); dev->delay_us(BMA4_MS_TO_US(1), dev->intf_ptr); if (rslt == BMA4_OK) { rslt = bma4_set_accel_config(&accel, dev); } return rslt; } /*! * @brief This API is used to reset the FIFO related configurations * in the fifo_frame structure. * */ static void reset_fifo_data_structure(struct bma4_fifo_frame *fifo) { /*Prepare for next FIFO read by resetting FIFO's * internal data structures */ fifo->accel_byte_start_idx = 0; fifo->mag_byte_start_idx = 0; fifo->sc_frame_byte_start_idx = 0; fifo->sensor_time = 0; fifo->skipped_frame_count = 0; fifo->accel_dropped_frame_count = 0; fifo->mag_dropped_frame_count = 0; } /*! * @brief This API computes the number of bytes of accel FIFO data * which is to be parsed in header-less mode */ static void get_accel_len_to_parse(uint16_t *start_idx, uint16_t *len, const uint16_t *acc_count, const struct bma4_fifo_frame *fifo) { /*Data start index*/ *start_idx = fifo->accel_byte_start_idx; if (fifo->fifo_data_enable == BMA4_FIFO_A_ENABLE) { /*Len has the number of bytes to loop for */ *len = (uint16_t)(((*acc_count) * BMA4_FIFO_A_LENGTH)); } else if (fifo->fifo_data_enable == BMA4_FIFO_M_A_ENABLE) { /*Len has the number of bytes to loop for */ *len = (uint16_t)(((*acc_count) * BMA4_FIFO_MA_LENGTH)); } else { /*Only aux. sensor or no sensor is enabled in FIFO, * so there will be no accel data. * Update the data index as complete */ *start_idx = fifo->length; } if ((*len) > fifo->length) { /*Handling the case where more data is requested * than available */ *len = fifo->length; } } /*! * @brief This API checks the fifo read data as empty frame, if it * is empty frame then moves the index to last byte. */ static void check_empty_fifo(uint16_t *data_index, const struct bma4_fifo_frame *fifo) { if ((*data_index + 2) < fifo->length) { /* Check if FIFO is empty */ if ((fifo->data[*data_index] == BMA4_FIFO_MSB_CONFIG_CHECK) && (fifo->data[*data_index + 1] == BMA4_FIFO_LSB_CONFIG_CHECK)) { /*Update the data index as complete*/ *data_index = fifo->length; } } } /*! * @brief This API is used to parse the accelerometer data from the * FIFO data in header mode. * */ static void extract_accel_header_mode(struct bma4_accel *accel_data, uint16_t *accel_length, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { uint8_t frame_header = 0; uint16_t data_index; uint16_t accel_index = 0; uint16_t frame_to_read = *accel_length; /*Check if this is the first iteration of data unpacking * if yes, then consider dummy byte on SPI */ if (fifo->accel_byte_start_idx == 0) { fifo->accel_byte_start_idx = dev->dummy_byte; } for (data_index = fifo->accel_byte_start_idx; data_index < fifo->length;) { /*Header byte is stored in the variable frame_header*/ frame_header = fifo->data[data_index]; /*Get the frame details from header*/ frame_header = frame_header & BMA4_FIFO_TAG_INTR_MASK; /*Index is moved to next byte where the data is starting*/ data_index++; switch (frame_header) { /* Accel frame */ case BMA4_FIFO_HEAD_A: case BMA4_FIFO_HEAD_M_A: unpack_acc_frm(accel_data, &data_index, &accel_index, frame_header, fifo, dev); break; /* Aux. sensor frame */ case BMA4_FIFO_HEAD_M: move_next_frame(&data_index, BMA4_FIFO_M_LENGTH, fifo); break; /* Sensor time frame */ case BMA4_FIFO_HEAD_SENSOR_TIME: unpack_sensortime_frame(&data_index, fifo); break; /* Skip frame */ case BMA4_FIFO_HEAD_SKIP_FRAME: unpack_skipped_frame(&data_index, fifo); break; /* Input config frame */ case BMA4_FIFO_HEAD_INPUT_CONFIG: move_next_frame(&data_index, 1, fifo); break; /* Sample drop frame */ case BMA4_FIFO_HEAD_SAMPLE_DROP: unpack_dropped_frame(&data_index, fifo); break; /* Over read FIFO data */ case BMA4_FIFO_HEAD_OVER_READ_MSB: /* Update the data index as complete*/ data_index = fifo->length; break; default: break; } if (frame_to_read == accel_index) { /*Number of frames to read completed*/ break; } } /*Update number of accel data read*/ *accel_length = accel_index; /*Update the accel frame index*/ fifo->accel_byte_start_idx = data_index; } /*! * @brief This API is used to parse the accelerometer data from the * FIFO data in both header mode and header-less mode. * It update the idx value which is used to store the index of * the current data byte which is parsed. */ static void unpack_acc_frm(struct bma4_accel *acc, uint16_t *idx, uint16_t *acc_idx, uint8_t frm, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { switch (frm) { case BMA4_FIFO_HEAD_A: case BMA4_FIFO_A_ENABLE: /*Partial read, then skip the data*/ if ((*idx + BMA4_FIFO_A_LENGTH) > fifo->length) { /*Update the data index as complete*/ *idx = fifo->length; break; } /*Unpack the data array into the structure instance "acc" */ unpack_accel_data(&acc[*acc_idx], *idx, fifo, dev); /*Move the data index*/ *idx = *idx + BMA4_FIFO_A_LENGTH; (*acc_idx)++; break; case BMA4_FIFO_HEAD_M_A: case BMA4_FIFO_M_A_ENABLE: /*Partial read, then skip the data*/ if ((*idx + BMA4_FIFO_MA_LENGTH) > fifo->length) { /*Update the data index as complete*/ *idx = fifo->length; break; } /*Unpack the data array into structure instance "acc"*/ unpack_accel_data(&acc[*acc_idx], *idx + BMA4_MA_FIFO_A_X_LSB, fifo, dev); /*Move the data index*/ *idx = *idx + BMA4_FIFO_MA_LENGTH; (*acc_idx)++; break; /* Aux. sensor frame */ case BMA4_FIFO_HEAD_M: case BMA4_FIFO_M_ENABLE: (*idx) = (*idx) + BMA4_FIFO_M_LENGTH; break; default: break; } } /*! * @brief This API is used to parse the accelerometer data from the * FIFO data and store it in the instance of the structure bma4_accel. */ static void unpack_accel_data(struct bma4_accel *accel_data, uint16_t data_start_index, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { uint16_t data_lsb; uint16_t data_msb; /* Accel raw x data */ data_lsb = fifo->data[data_start_index++]; data_msb = fifo->data[data_start_index++]; accel_data->x = (int16_t)((data_msb << 8) | data_lsb); /* Accel raw y data */ data_lsb = fifo->data[data_start_index++]; data_msb = fifo->data[data_start_index++]; accel_data->y = (int16_t)((data_msb << 8) | data_lsb); /* Accel raw z data */ data_lsb = fifo->data[data_start_index++]; data_msb = fifo->data[data_start_index++]; accel_data->z = (int16_t)((data_msb << 8) | data_lsb); if (dev->resolution == BMA4_12_BIT_RESOLUTION) { accel_data->x = (accel_data->x / 0x10); accel_data->y = (accel_data->y / 0x10); accel_data->z = (accel_data->z / 0x10); } else if (dev->resolution == BMA4_14_BIT_RESOLUTION) { accel_data->x = (accel_data->x / 0x04); accel_data->y = (accel_data->y / 0x04); accel_data->z = (accel_data->z / 0x04); } } /*! * @brief This API computes the number of bytes of Mag FIFO data which is * to be parsed in header-less mode * */ static void get_mag_len_to_parse(uint16_t *start_idx, uint16_t *len, const uint16_t *mag_count, const struct bma4_fifo_frame *fifo) { /*Data start index*/ *start_idx = fifo->mag_byte_start_idx; if (fifo->fifo_data_enable == BMA4_FIFO_M_ENABLE) { /*Len has the number of bytes to loop for */ *len = (uint16_t)(((*mag_count) * BMA4_FIFO_M_LENGTH)); } else if (fifo->fifo_data_enable == BMA4_FIFO_M_A_ENABLE) { /*Len has the number of bytes to loop for */ *len = (uint16_t)(((*mag_count) * BMA4_FIFO_MA_LENGTH)); } else { /*Only accel sensor or no sensor is enabled in FIFO, * so there will be no mag data. * Update the data index as complete */ *start_idx = fifo->length; } /*Handling the case where more data is requested than available*/ if ((*len) > fifo->length) { /*Len is equal to the FIFO length*/ *len = fifo->length; } } /*! * @brief This API is used to parse the magnetometer data from the * FIFO data in header mode. * */ static int8_t extract_mag_header_mode(const struct bma4_mag *data, uint16_t *len, struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { int8_t rslt = BMA4_OK; uint8_t frame_header = 0; uint16_t data_index; uint16_t mag_index = 0; uint16_t frame_to_read = *len; /*Check if this is the first iteration of data unpacking * if yes, then consider dummy byte on SPI */ if (fifo->mag_byte_start_idx == 0) { fifo->mag_byte_start_idx = dev->dummy_byte; } for (data_index = fifo->mag_byte_start_idx; data_index < fifo->length;) { /*Header byte is stored in the variable frame_header*/ frame_header = fifo->data[data_index]; /*Get the frame details from header*/ frame_header = frame_header & BMA4_FIFO_TAG_INTR_MASK; /*Index is moved to next byte where the data is starting*/ data_index++; switch (frame_header) { /* Aux. sensor frame */ case BMA4_FIFO_HEAD_M: case BMA4_FIFO_HEAD_M_A: rslt = unpack_mag_frm(data, &data_index, &mag_index, frame_header, fifo, dev); break; /* Aux. sensor frame */ case BMA4_FIFO_HEAD_A: move_next_frame(&data_index, BMA4_FIFO_A_LENGTH, fifo); break; /* Sensor time frame */ case BMA4_FIFO_HEAD_SENSOR_TIME: unpack_sensortime_frame(&data_index, fifo); break; /* Skip frame */ case BMA4_FIFO_HEAD_SKIP_FRAME: unpack_skipped_frame(&data_index, fifo); break; /* Input config frame */ case BMA4_FIFO_HEAD_INPUT_CONFIG: move_next_frame(&data_index, 1, fifo); break; /* Sample drop frame */ case BMA4_FIFO_HEAD_SAMPLE_DROP: unpack_dropped_frame(&data_index, fifo); break; case BMA4_FIFO_HEAD_OVER_READ_MSB: /*Update the data index as complete*/ data_index = fifo->length; break; default: break; } if (frame_to_read == mag_index) { /*Number of frames to read completed*/ break; } } /*update number of Aux. sensor data read*/ *len = mag_index; /*update the Aux. sensor frame index*/ fifo->mag_byte_start_idx = data_index; return rslt; } /*! * @brief This API is used to parse the magnetometer data from the * FIFO data in both header mode and header-less mode and update the * data_index value which is used to store the index of the current * data byte which is parsed. * */ static int8_t unpack_mag_frm(const struct bma4_mag *data, uint16_t *idx, uint16_t *mag_idx, uint8_t frm, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { int8_t rslt = BMA4_OK; switch (frm) { case BMA4_FIFO_HEAD_M: case BMA4_FIFO_M_ENABLE: /*partial read, then skip the data*/ if ((*idx + BMA4_FIFO_M_LENGTH) > fifo->length) { /*update the data index as complete*/ *idx = fifo->length; break; } /*unpack the data array into Aux. sensor data structure*/ rslt = unpack_mag_data(&data[*mag_idx], *idx, fifo, dev); /*move the data index*/ *idx = *idx + BMA4_FIFO_M_LENGTH; (*mag_idx)++; break; case BMA4_FIFO_HEAD_M_A: case BMA4_FIFO_M_A_ENABLE: /*partial read, then skip the data*/ if ((*idx + BMA4_FIFO_MA_LENGTH) > fifo->length) { /*update the data index as complete*/ *idx = fifo->length; break; } /*unpack the data array into Aux. sensor data structure*/ rslt = unpack_mag_data(&data[*mag_idx], *idx, fifo, dev); /*move the data index to next frame*/ *idx = *idx + BMA4_FIFO_MA_LENGTH; (*mag_idx)++; break; /* aux. sensor frame */ case BMA4_FIFO_HEAD_A: case BMA4_FIFO_A_ENABLE: (*idx) = (*idx) + BMA4_FIFO_A_LENGTH; break; default: break; } return rslt; } /*! * @brief This API is used to parse the auxiliary magnetometer data from * the FIFO data and store it in the instance of the structure mag_data. * */ static int8_t unpack_mag_data(const struct bma4_mag *mag_data, uint16_t start_idx, const struct bma4_fifo_frame *fifo, const struct bma4_dev *dev) { int8_t rslt; struct bma4_mag_fifo_data mag_fifo_data; /* Aux. mag sensor raw x data */ mag_fifo_data.mag_x_lsb = fifo->data[start_idx++]; mag_fifo_data.mag_x_msb = fifo->data[start_idx++]; /* Aux. mag sensor raw y data */ mag_fifo_data.mag_y_lsb = fifo->data[start_idx++]; mag_fifo_data.mag_y_msb = fifo->data[start_idx++]; /* Aux. mag sensor raw z data */ mag_fifo_data.mag_z_lsb = fifo->data[start_idx++]; mag_fifo_data.mag_z_msb = fifo->data[start_idx++]; /* Aux. mag sensor raw r data */ mag_fifo_data.mag_r_y2_lsb = fifo->data[start_idx++]; mag_fifo_data.mag_r_y2_msb = fifo->data[start_idx++]; /*Compensated FIFO data output*/ rslt = bma4_second_if_mag_compensate_xyz(mag_fifo_data, dev->aux_sensor, mag_data); return rslt; } /*! * @brief This API is used to parse and store the sensor time from the * FIFO data in the structure instance dev. * */ static void unpack_sensortime_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo) { uint32_t sensor_time_byte3 = 0; uint16_t sensor_time_byte2 = 0; uint8_t sensor_time_byte1 = 0; /*Partial read, then move the data index to last data*/ if ((*data_index + BMA4_SENSOR_TIME_LENGTH) > fifo->length) { /*Update the data index as complete*/ *data_index = fifo->length; } else { sensor_time_byte3 = fifo->data[(*data_index) + BMA4_SENSOR_TIME_MSB_BYTE] << 16; sensor_time_byte2 = fifo->data[(*data_index) + BMA4_SENSOR_TIME_XLSB_BYTE] << 8; sensor_time_byte1 = fifo->data[(*data_index)]; /* Sensor time */ fifo->sensor_time = (uint32_t)(sensor_time_byte3 | sensor_time_byte2 | sensor_time_byte1); *data_index = (*data_index) + BMA4_SENSOR_TIME_LENGTH; } } /*! * @brief This API is used to parse and store the skipped_frame_count from * the FIFO data in the structure instance dev. */ static void unpack_skipped_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo) { /*Partial read, then move the data index to last data*/ if (*data_index >= fifo->length) { /*Update the data index as complete*/ *data_index = fifo->length; } else { fifo->skipped_frame_count = fifo->data[*data_index]; /*Move the data index*/ *data_index = (*data_index) + 1; } } /*! * @brief This API is used to parse and store the dropped_frame_count from * the FIFO data in the structure instance dev. */ static void unpack_dropped_frame(uint16_t *data_index, struct bma4_fifo_frame *fifo) { uint8_t dropped_frame = 0; /*Partial read, then move the data index to last data*/ if (*data_index >= fifo->length) { /*Update the data index as complete*/ *data_index = fifo->length; } else { /*Extract accel and mag dropped frame count*/ dropped_frame = fifo->data[*data_index] & BMA4_ACCEL_AUX_FIFO_DROP; /*Move the data index and update the dropped frame count*/ switch (dropped_frame) { case BMA4_ACCEL_FIFO_DROP: *data_index = (*data_index) + BMA4_FIFO_A_LENGTH; fifo->accel_dropped_frame_count = fifo->accel_dropped_frame_count + 1; break; case BMA4_AUX_FIFO_DROP: *data_index = (*data_index) + BMA4_FIFO_M_LENGTH; fifo->mag_dropped_frame_count = fifo->mag_dropped_frame_count + 1; break; case BMA4_ACCEL_AUX_FIFO_DROP: *data_index = (*data_index) + BMA4_FIFO_MA_LENGTH; fifo->accel_dropped_frame_count = fifo->accel_dropped_frame_count + 1; fifo->mag_dropped_frame_count = fifo->mag_dropped_frame_count + 1; break; default: break; } } } /*! * @brief This API is used to move the data index ahead of the * current_frame_length parameter when unnecessary FIFO data appears while * extracting the user specified data. */ static void move_next_frame(uint16_t *data_index, uint8_t current_frame_length, const struct bma4_fifo_frame *fifo) { /*Partial read, then move the data index to last data*/ if ((*data_index + current_frame_length) > fifo->length) { /*Update the data index as complete*/ *data_index = fifo->length; } else { /*Move the data index to next frame*/ *data_index = *data_index + current_frame_length; } } /*! * @brief This function validates the Accel self-test data and decides the * result of self-test operation. */ static int8_t validate_selftest(const struct bma4_selftest_delta_limit *accel_data_diff, const struct bma4_dev *dev) { int8_t rslt = 0; /* Set self-test amplitude based on variant */ switch (dev->variant) { case BMA42X_VARIANT: /* Validating accel data by comparing with minimum value of the * axes in mg. For BMA42x - > x axis limit 400mg, y axis limit * 800mg and z axis limit 400mg */ if ((accel_data_diff->x <= BMA42X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->y <= BMA42X_ST_ACC_Y_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA42X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_Y_AND_Z_AXIS_FAILED; } else if ((accel_data_diff->x <= BMA42X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->y <= BMA42X_ST_ACC_Y_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_AND_Y_AXIS_FAILED; } else if ((accel_data_diff->x <= BMA42X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA42X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_AND_Z_AXIS_FAILED; } else if ((accel_data_diff->y <= BMA42X_ST_ACC_Y_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA42X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_Y_AND_Z_AXIS_FAILED; } else if (accel_data_diff->x <= BMA42X_ST_ACC_X_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_X_AXIS_FAILED; } else if (accel_data_diff->y <= BMA42X_ST_ACC_Y_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_Y_AXIS_FAILED; } else if (accel_data_diff->z <= BMA42X_ST_ACC_Z_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_Z_AXIS_FAILED; } else { rslt = BMA4_SELFTEST_PASS; } break; case BMA45X_VARIANT: /* Validating accel data by comparing with minimum value of the * axes in mg. For BMA45x - > x axis limit 1800mg, y axis limit * 1800mg and z axis limit 1800mg */ if ((accel_data_diff->x <= BMA45X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->y <= BMA45X_ST_ACC_Y_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA45X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_Y_AND_Z_AXIS_FAILED; } else if ((accel_data_diff->x <= BMA45X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->y <= BMA45X_ST_ACC_Y_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_AND_Y_AXIS_FAILED; } else if ((accel_data_diff->x <= BMA45X_ST_ACC_X_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA45X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_X_AND_Z_AXIS_FAILED; } else if ((accel_data_diff->y <= BMA45X_ST_ACC_Y_AXIS_SIGNAL_DIFF) && (accel_data_diff->z <= BMA45X_ST_ACC_Z_AXIS_SIGNAL_DIFF)) { rslt = BMA4_SELFTEST_DIFF_Y_AND_Z_AXIS_FAILED; } else if (accel_data_diff->x < BMA45X_ST_ACC_X_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_X_AXIS_FAILED; } else if (accel_data_diff->y < BMA45X_ST_ACC_Y_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_Y_AXIS_FAILED; } else if (accel_data_diff->z < BMA45X_ST_ACC_Z_AXIS_SIGNAL_DIFF) { rslt = BMA4_SELFTEST_DIFF_Z_AXIS_FAILED; } else { rslt = BMA4_SELFTEST_PASS; } break; default: rslt = BMA4_E_INVALID_SENSOR; break; } return rslt; } /*! * @brief This API is used to calculate the power of 2 */ static int32_t power(int16_t base, uint8_t resolution) { uint8_t i = 1; /* Initialize variable to store the power of 2 value */ int32_t value = 1; for (; i <= resolution; i++) { value = (int32_t)(value * base); } return value; } /*! * @brief This internal API brings up the secondary interface to access * auxiliary sensor * */ static int8_t set_aux_interface_config(struct bma4_dev *dev) { /* Variable to return error codes */ int8_t rslt; /* Check for null pointer error */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Enable the auxiliary sensor */ rslt = bma4_set_mag_enable(0x01, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Disable advance power save */ rslt = bma4_set_advance_power_save(0x00, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Set the I2C device address of auxiliary device */ rslt = bma4_set_i2c_device_addr(dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Set auxiliary interface to manual mode */ rslt = bma4_set_mag_manual_enable(dev->aux_config.manual_enable, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Set the number of bytes for burst read */ rslt = bma4_set_mag_burst(dev->aux_config.burst_read_length, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* Switch on the the auxiliary interface mode */ rslt = bma4_set_if_mode(dev->aux_config.if_mode, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); } } } } } } return rslt; } /*! * @brief This internal API reads the data from the auxiliary sensor * depending on burst length configured */ static int8_t extract_aux_data(uint8_t aux_reg_addr, uint8_t *aux_data, uint16_t len, struct bma4_dev *dev) { /* Variable to return error codes */ int8_t rslt; /* Pointer variable to read data from the register */ uint8_t data[15] = { 0 }; /* Variable to define length counts */ uint8_t len_count = 0; /* Variable to define burst read length */ uint8_t burst_len = 0; /* Variable to define read length */ uint8_t read_length = 0; /* Variable to define the number of burst reads */ uint8_t burst_count; /* Variable to define address of the data register*/ uint8_t aux_read_addr = BMA4_DATA_0_ADDR; /* Extract burst read length in a variable */ rslt = map_read_len(&burst_len, dev); if ((rslt == BMA4_OK) && (aux_data != NULL)) { for (burst_count = 0; burst_count < len; burst_count += burst_len) { /* Set the address whose data is to be read */ rslt = bma4_set_mag_read_addr(aux_reg_addr, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* If user defined length is valid */ if (len > 0) { /* Read the data from the data register */ rslt = bma4_read_regs(aux_read_addr, data, (uint8_t)burst_len, dev); dev->delay_us(BMA4_AUX_COM_DELAY, dev->intf_ptr); if (rslt == BMA4_OK) { /* If defined user length or remaining * length after a burst read is less than * burst length */ if ((len - burst_count) < burst_len) { /* Read length is equal to burst * length or remaining length */ read_length = (uint8_t)(len - burst_count); } else { /* Read length is equal to burst * length */ read_length = burst_len; } /* Copy the read data in terms of given * read length */ for (len_count = 0; len_count < read_length; len_count++) { aux_data[burst_count + len_count] = data[len_count]; } /* Increment the register address by * burst read length */ aux_reg_addr += burst_len; } else { rslt = BMA4_E_RD_WR_LENGTH_INVALID; } } else { rslt = BMA4_E_COM_FAIL; } } else { rslt = BMA4_E_COM_FAIL; } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API maps the actual burst read length with user * length set. */ static int8_t map_read_len(uint8_t *len, const struct bma4_dev *dev) { /* Variable to return error codes */ int8_t rslt = BMA4_OK; switch (dev->aux_config.burst_read_length) { case BMA4_AUX_READ_LEN_0: *len = 1; break; case BMA4_AUX_READ_LEN_1: *len = 2; break; case BMA4_AUX_READ_LEN_2: *len = 6; break; case BMA4_AUX_READ_LEN_3: *len = 8; break; default: rslt = BMA4_E_OUT_OF_RANGE; break; } return rslt; } /*! * @brief This internal API checks null pointer error */ static int8_t null_pointer_check(const struct bma4_dev *dev) { int8_t rslt = BMA4_OK; if ((dev == NULL) || (dev->bus_read == NULL) || (dev->bus_write == NULL) || (dev->intf_ptr == NULL)) { rslt = BMA4_E_NULL_PTR; } else { rslt = BMA4_OK; } return rslt; } /*! @endcond */ /*! * @brief This API does soft reset */ int8_t bma4_soft_reset(struct bma4_dev *dev) { int8_t rslt; uint8_t command_reg = BMA4_SOFT_RESET; /* Check the dev structure as NULL */ rslt = null_pointer_check(dev); /* Check the bma4 structure as NULL */ if (rslt == BMA4_OK) { /* Write command register */ rslt = bma4_write_regs(BMA4_CMD_ADDR, &command_reg, 1, dev); } return rslt; } /*! * @brief This API performs Fast Offset Compensation for accelerometer. */ int8_t bma4_perform_accel_foc(const struct bma4_accel_foc_g_value *accel_g_value, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Structure to define the accelerometer configurations */ struct bma4_accel_config acc_cfg = { 0, 0, 0, 0 }; /* Variable to store status of advance power save */ uint8_t aps = 0; /* Variable to store status of accelerometer enable */ uint8_t acc_en = 0; /* Variable to get the accel status */ uint8_t accel_status = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_g_value != NULL)) { /* Check for input validity */ if (((ABS(accel_g_value->x) + ABS(accel_g_value->y) + ABS(accel_g_value->z)) == 1) && ((accel_g_value->sign == 1) || (accel_g_value->sign == 0))) { /* Enable the accelerometer */ rslt = bma4_set_accel_enable(BMA4_ENABLE, dev); /* Get the accel status */ if (rslt == BMA4_OK) { rslt = bma4_get_accel_enable(&accel_status, dev); } /* Verify FOC position */ if (rslt == BMA4_OK) { rslt = verify_foc_position(accel_status, accel_g_value, dev); } if (rslt == BMA4_OK) { /* Save accelerometer configurations, accelerometer * enable status and advance power save status */ rslt = save_accel_foc_config(&acc_cfg, &aps, &acc_en, dev); } /* Set configurations for FOC */ if (rslt == BMA4_OK) { rslt = set_accel_foc_config(dev); } /* Perform accelerometer FOC */ if (rslt == BMA4_OK) { rslt = perform_accel_foc(accel_g_value, &acc_cfg, dev); } /* Restore the saved configurations */ if (rslt == BMA4_OK) { rslt = restore_accel_foc_config(&acc_cfg, aps, acc_en, dev); } } else { rslt = BMA4_E_OUT_OF_RANGE; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API verifies and allows only the correct position to do Fast Offset Compensation for * accelerometer. */ static int8_t verify_foc_position(uint8_t accel_en, const struct bma4_accel_foc_g_value *accel_g_axis, struct bma4_dev *dev) { int8_t rslt; struct bma4_accel avg_foc_data = { 0 }; struct bma4_foc_temp_value temp_foc_data = { 0 }; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_g_axis != NULL)) { rslt = get_average_of_sensor_data(accel_en, &temp_foc_data, dev); if (rslt == BMA4_OK) { /* Taking modulus to make negative values as positive */ if ((accel_g_axis->x == 1) && (accel_g_axis->sign == 1)) { temp_foc_data.x = temp_foc_data.x * -1; } else if ((accel_g_axis->y == 1) && (accel_g_axis->sign == 1)) { temp_foc_data.y = temp_foc_data.y * -1; } else if ((accel_g_axis->z == 1) && (accel_g_axis->sign == 1)) { temp_foc_data.z = temp_foc_data.z * -1; } /* Typecasting into 16 bit */ avg_foc_data.x = (int16_t)(temp_foc_data.x); avg_foc_data.y = (int16_t)(temp_foc_data.y); avg_foc_data.z = (int16_t)(temp_foc_data.z); rslt = validate_foc_position(accel_en, accel_g_axis, avg_foc_data, dev); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API reads and provides average for 128 samples of sensor data for accel FOC operation. */ static int8_t get_average_of_sensor_data(uint8_t accel_en, struct bma4_foc_temp_value *temp_foc_data, struct bma4_dev *dev) { int8_t rslt; struct bma4_accel sensor_data = { 0 }; uint8_t sample_count = 0; uint8_t datardy_try_cnt; uint8_t drdy_status = 0; uint8_t sensor_drdy = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (temp_foc_data != NULL)) { if (accel_en == BMA4_ENABLE) { sensor_drdy = BMA4_STAT_DATA_RDY_ACCEL_MSK; } /* Read sensor values before FOC */ while (sample_count < BMA4_FOC_SAMPLE_LIMIT) { datardy_try_cnt = 5; do { dev->delay_us(BMA4_MS_TO_US(20), dev->intf_ptr); rslt = bma4_get_status(&drdy_status, dev); datardy_try_cnt--; } while ((rslt == BMA4_OK) && (!(drdy_status & sensor_drdy)) && (datardy_try_cnt)); if ((rslt != BMA4_OK) || (datardy_try_cnt == 0)) { rslt = BMA4_E_COM_FAIL; break; } rslt = bma4_read_accel_xyz(&sensor_data, dev); if (rslt == BMA4_OK) { temp_foc_data->x += sensor_data.x; temp_foc_data->y += sensor_data.y; temp_foc_data->z += sensor_data.z; } else { return rslt; } sample_count++; } if (rslt == BMA4_OK) { temp_foc_data->x = (temp_foc_data->x / BMA4_FOC_SAMPLE_LIMIT); temp_foc_data->y = (temp_foc_data->y / BMA4_FOC_SAMPLE_LIMIT); temp_foc_data->z = (temp_foc_data->z / BMA4_FOC_SAMPLE_LIMIT); } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API validates accel FOC position as per the range */ static int8_t validate_foc_position(uint8_t accel_en, const struct bma4_accel_foc_g_value *accel_g_axis, struct bma4_accel avg_foc_data, struct bma4_dev *dev) { int8_t rslt; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_g_axis != NULL)) { if (accel_en == BMA4_ENABLE) { if (accel_g_axis->x == 1) { rslt = validate_foc_accel_axis(avg_foc_data.x, dev); } else if (accel_g_axis->y == 1) { rslt = validate_foc_accel_axis(avg_foc_data.y, dev); } else { rslt = validate_foc_accel_axis(avg_foc_data.z, dev); } } else { rslt = BMA4_E_COM_FAIL; } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API validates depends on accel FOC access input */ static int8_t validate_foc_accel_axis(int16_t avg_foc_data, struct bma4_dev *dev) { struct bma4_accel_config sens_cfg = { 0 }; uint8_t range; int8_t rslt; uint16_t range_2g = 0; uint16_t range_4g = 0; uint16_t range_8g = 0; uint16_t range_16g = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Get configurations for accel */ rslt = bma4_get_accel_config(&sens_cfg, dev); range = sens_cfg.range; /* Calculation. Eg. Range = 2G, Resolution = 12 bit. * Value(i.e range_2g) = 2^(Resolution - 1) / Range * = 2^(12-1) / 2 = 1024 */ if (dev->resolution == BMA4_12_BIT_RESOLUTION) { range_2g = 1024; range_4g = 512; range_8g = 256; range_16g = 128; } else if (dev->resolution == BMA4_14_BIT_RESOLUTION) { range_2g = 4096; range_4g = 2048; range_8g = 1024; range_16g = 512; } else if (dev->resolution == BMA4_16_BIT_RESOLUTION) { range_2g = 16384; range_4g = 8192; range_8g = 4096; range_16g = 2048; } /* Reference LSB value of 2G */ if ((range == BMA4_ACCEL_RANGE_2G) && (avg_foc_data > BMA4_MIN_NOISE_LIMIT(range_2g)) && (avg_foc_data < BMA4_MAX_NOISE_LIMIT(range_2g))) { rslt = BMA4_OK; } /* Reference LSB value of 4G */ else if ((range == BMA4_ACCEL_RANGE_4G) && (avg_foc_data > BMA4_MIN_NOISE_LIMIT(range_4g)) && (avg_foc_data < BMA4_MAX_NOISE_LIMIT(range_4g))) { rslt = BMA4_OK; } /* Reference LSB value of 8G */ else if ((range == BMA4_ACCEL_RANGE_8G) && (avg_foc_data > BMA4_MIN_NOISE_LIMIT(range_8g)) && (avg_foc_data < BMA4_MAX_NOISE_LIMIT(range_8g))) { rslt = BMA4_OK; } /* Reference LSB value of 16G */ else if ((range == BMA4_ACCEL_RANGE_16G) && (avg_foc_data > BMA4_MIN_NOISE_LIMIT(range_16g)) && (avg_foc_data < BMA4_MAX_NOISE_LIMIT(range_16g))) { rslt = BMA4_OK; } else { rslt = BMA4_E_FOC_FAIL; } } return rslt; } /*! * @brief This internal API saves the configurations before performing FOC. */ static int8_t save_accel_foc_config(struct bma4_accel_config *acc_cfg, uint8_t *aps, uint8_t *acc_en, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Variable to get the status from PWR_CTRL register */ uint8_t pwr_ctrl_data = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (acc_cfg != NULL) && (aps != NULL) && (acc_en != NULL)) { /* Get accelerometer configurations to be saved */ rslt = bma4_get_accel_config(acc_cfg, dev); if (rslt == BMA4_OK) { /* Get accelerometer enable status to be saved */ rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &pwr_ctrl_data, 1, dev); if (rslt == BMA4_OK) { *acc_en = BMA4_GET_BITSLICE(pwr_ctrl_data, BMA4_ACCEL_ENABLE); } /* Get advance power save mode to be saved */ if (rslt == BMA4_OK) { rslt = bma4_get_advance_power_save(aps, dev); } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API sets configurations for performing accelerometer FOC. */ static int8_t set_accel_foc_config(struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Variable to set the accelerometer configuration value */ uint8_t acc_conf_data = BMA4_FOC_ACC_CONF_VAL; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Disabling offset compensation */ rslt = set_bma4_accel_offset_comp(BMA4_DISABLE, dev); if (rslt == BMA4_OK) { /* Set accelerometer configurations to 50Hz, continuous mode, CIC mode */ rslt = bma4_write_regs(BMA4_ACCEL_CONFIG_ADDR, &acc_conf_data, 1, dev); if (rslt == BMA4_OK) { /* Set accelerometer to normal mode by enabling it */ rslt = bma4_set_accel_enable(BMA4_ENABLE, dev); if (rslt == BMA4_OK) { /* Disable advance power save mode */ rslt = bma4_set_advance_power_save(BMA4_DISABLE, dev); } } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API enables/disables the offset compensation for * filtered and un-filtered accelerometer data. */ static int8_t set_bma4_accel_offset_comp(uint8_t offset_en, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Variable to store data */ uint8_t data = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Enable/Disable offset compensation */ rslt = bma4_read_regs(BMA4_NV_CONFIG_ADDR, &data, 1, dev); if (rslt == BMA4_OK) { data = BMA4_SET_BITSLICE(data, BMA4_NV_ACCEL_OFFSET, offset_en); rslt = bma4_write_regs(BMA4_NV_CONFIG_ADDR, &data, 1, dev); } } return rslt; } /*! * @brief This internal API performs Fast Offset Compensation for accelerometer. */ static int8_t perform_accel_foc(const struct bma4_accel_foc_g_value *accel_g_value, const struct bma4_accel_config *acc_cfg, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Variable to define count */ uint8_t loop; /* Variable to store status read from the status register */ uint8_t reg_status = 0; /* Array of structure to store accelerometer data */ struct bma4_accel accel_value[128] = { { 0 } }; /* Structure to store accelerometer data temporarily */ struct bma4_foc_temp_value temp = { 0, 0, 0 }; /* Structure to store the average of accelerometer data */ struct bma4_accel accel_avg = { 0, 0, 0 }; /* Variable to define LSB per g value */ uint16_t lsb_per_g = 0; /* Variable to define range */ uint8_t range = 0; /* Variable to set limit for FOC sample */ uint8_t limit = 128; /* Structure to store accelerometer data deviation from ideal value */ struct bma4_offset_delta delta = { 0, 0, 0 }; /* Structure to store accelerometer offset values */ struct bma4_accel_offset offset = { 0, 0, 0 }; /* Variable tries max 5 times for interrupt then generates timeout */ uint8_t try_cnt; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (accel_g_value != NULL) && (acc_cfg != NULL)) { for (loop = 0; loop < limit; loop++) { try_cnt = 5; while (try_cnt && (!(reg_status & BMA4_STAT_DATA_RDY_ACCEL_MSK))) { /* 20ms delay for 50Hz ODR */ dev->delay_us(BMA4_MS_TO_US(20), dev->intf_ptr); rslt = bma4_get_status(®_status, dev); try_cnt--; } if ((rslt == BMA4_OK) && (reg_status & BMA4_STAT_DATA_RDY_ACCEL_MSK)) { rslt = bma4_read_accel_xyz(&accel_value[loop], dev); } if (rslt == BMA4_OK) { rslt = bma4_read_accel_xyz(&accel_value[loop], dev); } if (rslt == BMA4_OK) { /* Store the data in a temporary structure */ temp.x = temp.x + (int32_t)accel_value[loop].x; temp.y = temp.y + (int32_t)accel_value[loop].y; temp.z = temp.z + (int32_t)accel_value[loop].z; } else { break; } } if (rslt == BMA4_OK) { /* Take average of x, y and z data for lesser noise */ accel_avg.x = (int16_t)(temp.x / 128); accel_avg.y = (int16_t)(temp.y / 128); accel_avg.z = (int16_t)(temp.z / 128); /* Get the exact range value */ map_accel_range(acc_cfg->range, &range); /* Get the smallest possible measurable acceleration level given the range and * resolution */ lsb_per_g = (uint16_t)(power(2, dev->resolution) / (2 * range)); /* Compensate acceleration data against gravity */ comp_for_gravity(lsb_per_g, accel_g_value, &accel_avg, &delta); /* Scale according to offset register resolution */ scale_bma4_accel_offset(range, &delta, &offset); /* Invert the accelerometer offset data */ invert_bma4_accel_offset(&offset); /* Write offset data in the offset compensation register */ rslt = write_bma4_accel_offset(&offset, dev); /* Enable offset compensation */ if (rslt == BMA4_OK) { rslt = set_bma4_accel_offset_comp(BMA4_ENABLE, dev); } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; } /*! * @brief This internal API converts the accelerometer range value into * corresponding integer value. */ static void map_accel_range(uint8_t range_in, uint8_t *range_out) { switch (range_in) { case BMA4_ACCEL_RANGE_2G: *range_out = 2; break; case BMA4_ACCEL_RANGE_4G: *range_out = 4; break; case BMA4_ACCEL_RANGE_8G: *range_out = 8; break; case BMA4_ACCEL_RANGE_16G: *range_out = 16; break; default: /* By default RANGE 4G is set */ *range_out = 4; break; } } /*! * @brief This internal API compensate the accelerometer data against gravity. */ static void comp_for_gravity(uint16_t lsb_per_g, const struct bma4_accel_foc_g_value *g_val, const struct bma4_accel *data, struct bma4_offset_delta *comp_data) { /* Array to store the accelerometer values in LSB */ int16_t accel_value_lsb[3] = { 0 }; /* Convert g-value to LSB */ accel_value_lsb[BMA4_X_AXIS] = (int16_t)(lsb_per_g * g_val->x); accel_value_lsb[BMA4_Y_AXIS] = (int16_t)(lsb_per_g * g_val->y); accel_value_lsb[BMA4_Z_AXIS] = (int16_t)(lsb_per_g * g_val->z); /* Get the compensated values for X, Y and Z axis */ comp_data->x = (data->x - accel_value_lsb[BMA4_X_AXIS]); comp_data->y = (data->y - accel_value_lsb[BMA4_Y_AXIS]); comp_data->z = (data->z - accel_value_lsb[BMA4_Z_AXIS]); } /*! * @brief This internal API scales the compensated accelerometer data according * to the offset register resolution. */ static void scale_bma4_accel_offset(uint8_t range, const struct bma4_offset_delta *comp_data, struct bma4_accel_offset *data) { /* Variable to store the position of bit having 3.9mg resolution */ int8_t bit_pos_3_9mg; /* Variable to store the position previous of bit having 3.9mg resolution */ int8_t bit_pos_3_9mg_prev_bit; /* Variable to store the round-off value */ uint8_t round_off; /* Find the bit position of 3.9mg */ bit_pos_3_9mg = get_bit_pos_3_9mg(range); /* Round off, consider if the next bit is high */ bit_pos_3_9mg_prev_bit = bit_pos_3_9mg - 1; round_off = (uint8_t)(power(2, ((uint8_t) bit_pos_3_9mg_prev_bit))); /* Scale according to offset register resolution */ data->x = (uint8_t)((comp_data->x + round_off) / power(2, ((uint8_t) bit_pos_3_9mg))); data->y = (uint8_t)((comp_data->y + round_off) / power(2, ((uint8_t) bit_pos_3_9mg))); data->z = (uint8_t)((comp_data->z + round_off) / power(2, ((uint8_t) bit_pos_3_9mg))); } /*! * @brief This internal API inverts the accelerometer offset data. */ static void invert_bma4_accel_offset(struct bma4_accel_offset *offset_data) { /* Get the offset data */ offset_data->x = (uint8_t)((offset_data->x) * (-1)); offset_data->y = (uint8_t)((offset_data->y) * (-1)); offset_data->z = (uint8_t)((offset_data->z) * (-1)); } /*! * @brief This internal API writes the offset data in the offset compensation * register. */ static int8_t write_bma4_accel_offset(const struct bma4_accel_offset *offset, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Array to store the offset data */ uint8_t data_array[3] = { 0 }; data_array[0] = offset->x; data_array[1] = offset->y; data_array[2] = offset->z; /* NULL pointer check */ rslt = null_pointer_check(dev); if (rslt == BMA4_OK) { /* Offset values are written in the offset register */ rslt = bma4_write_regs(BMA4_OFFSET_0_ADDR, data_array, 3, dev); } return rslt; } /*! * @brief This internal API finds the bit position of 3.9mg according to given * range and resolution. */ static int8_t get_bit_pos_3_9mg(uint8_t range) { /* Variable to store the bit position of 3.9mg resolution */ int8_t bit_pos_3_9mg; /* Variable to shift the bits according to the resolution */ uint32_t divisor = 1; /* Scaling factor to get the bit position of 3.9 mg resolution */ int16_t scale_factor = -1; /* Variable to store temporary value */ uint16_t temp; /* Shift left by the times of resolution */ divisor = divisor << 16; /* Get the bit position to be shifted */ temp = (uint16_t)(divisor / (range * 256)); /* Get the scaling factor until bit position is shifted to last bit */ while (temp != 1) { scale_factor++; temp = temp >> 1; } /* Scaling factor is the bit position of 3.9 mg resolution */ bit_pos_3_9mg = (int8_t) scale_factor; return bit_pos_3_9mg; } /*! * @brief This internal API restores the configurations saved before performing * accelerometer FOC. */ static int8_t restore_accel_foc_config(const struct bma4_accel_config *acc_cfg, uint8_t aps, uint8_t acc_en, struct bma4_dev *dev) { /* Variable to define error */ int8_t rslt; /* Variable to get the status from PWR_CTRL register */ uint8_t pwr_ctrl_data = 0; /* NULL pointer check */ rslt = null_pointer_check(dev); if ((rslt == BMA4_OK) && (acc_cfg != NULL)) { /* Restore the saved accelerometer configurations */ rslt = bma4_set_accel_config(acc_cfg, dev); if (rslt == BMA4_OK) { /* Restore the saved accelerometer enable status */ rslt = bma4_read_regs(BMA4_POWER_CTRL_ADDR, &pwr_ctrl_data, 1, dev); if (rslt == BMA4_OK) { pwr_ctrl_data = BMA4_SET_BITSLICE(pwr_ctrl_data, BMA4_ACCEL_ENABLE, acc_en); rslt = bma4_write_regs(BMA4_POWER_CTRL_ADDR, &pwr_ctrl_data, 1, dev); /* Restore the saved advance power save */ if (rslt == BMA4_OK) { rslt = bma4_set_advance_power_save(aps, dev); } } } } else { rslt = BMA4_E_NULL_PTR; } return rslt; }