No firmware for full BHI360 Shuttle Board 3.0 Usage

[maxswjeon]

Hi, we are making a satelite for AAS CanSat 2024 from Yonsei University, and selected Bosch Sensortec BHI360 Shuttle Board 3.0 for 9-DoF IMU and presure & temperature.

I found out that BHI360 Shuttle Board includes

• BHI360 IMU & Processor
• BMP580 Barometer & Temperature Sensor
• BMM150 Magnetometer
• BMM350 Magnetometer
• BME688 Envrionment Sensor

I would like to use BHI360, BMP580 and BMM350 at the same time.
However, I found that there is no firmware that utilizes those sensors.
BHI360_BMM150_BMP580_BME688.fw does exist in the firmware/bhi360 folder, but I cannot find BHI360_BMM350_BMP580.fw nor BHI360_BMM350_BMP580_BME688.fw.

As noted here, the BHI360 SDK is not yet released, and I wonder how can I access those combination of sensors.

Thank you.

[BSTRobin]

Hi maxswjeon,

BHI360 shuttle board 3.0 integrated BMP580, BMM150, BMM350, BME688， but the official firmware has not yet released the combination of BMP580 and BMM350.  If you need any further information on this topic(BHI360_BMM350_BMP580.fw or BHI360 SDK), please get in contact with one of our official distributors or sales representatives to allow us to review each project on a case-by-case basis.