Hi,
Our team is new to BHI260AP and have some questions. So, we are using BHI260AP with a shuttle board 3.0 and an applocation board 3.0 for testing and validation purposes. We use the development desktop 2.0 for testing. It seems that after every power cycle we have to download the firmware to the IMU (either RAM or flash). I was wondering if there are anyways we dont have to repeat this every time. This becomes important as we intend to have our own IMU PCB designed and we need to determine if the firmware will have to flash to the IMU as frequnetly as every power cycle? or there are other ways to do this less frequently? Some clarification as well as suggested solutions would be appreciated.