Advanced Bosch BME688 Breakout Board - Beginners guide for configuring on Raspberry Pi 4?

[Pi4Pete]

I have just bought the Advanced Bosch BME688 Breakout Board from PiHut.  Is there a beginners guide to setting this up on a Rasberry Pi?  This is my first foray into sensors and while I can find arduino related information, I can't track down a detailed guide for the Rasberry Pi.

Any help, greatly appreciated.

Pete.

[Bronco]

Hi 
It must be karma.
With this implementation (lib) my 2 readers (BME680+BME688) also stay with 1 for several hours.

Also tried with setting set_heatr_conf but no changes

from bme68x import BME68X

import bme68xConstants as cnst

import bsecConstants as bsec

bme = BME68X(cnst.BME68X_I2C_ADDR_LOW, bsec.BSEC_ENABLE)

#bme.set_heatr_conf(cnst.BME68X_ENABLE, 320, 150, cnst.BME68X_FORCED_MODE)

[BSTRobin]

Hi all,

BME688 software and document could be found from here: https://www.bosch-sensortec.com/software-tools/software/bme688-software/