06-30-2023 10:05 AM
Hi, BOSCH
The BME680 library file is currently in use by the gcc compiler.
The gcc compiler works without problems through the libalgobsec.a file provided on the homepage,
I'm trying to change to the arm compiler (MDK-ARM) for internal development, but I can't use the libalgobsec.a file.
If you add libalgobsec.a and compile it, the following error occurs,
You are in a situation where you need to proceed with additional operations, or you need another library file.
Thank you.
07-06-2023 04:05 PM
Hi mgchoi,
We will check the download link for previous version and give you feedback.
07-11-2023 02:45 AM
07-14-2023 04:42 AM
Currently, the download link received in the email is available now. You can fill in your information in https://www.bosch-sensortec.com/software-tools/software/previous-bsec-software-versions, and try to download BSEC previous version after receiving link in the email.
08-16-2023 02:34 AM - edited 08-16-2023 02:35 AM
I am sending you an email because I have an inquiry during the test regarding the library.
If you compare the files you used among the links you sent me last time
It is estimated that the actual version used is "BSEC_1.4.8.0_Generic_Release_updated_v3".
(The internal sauce is being modified a little, so it's not completely the same.)
2. List of files currently using armcc in the compiler (Keil MDK-ARM)
At the time of the last test, I accidentally tested the BME680 without connecting it, so I thought there was no problem,
I connected the BME680 and tested it again, and it no longer progressed in the bsec_init(); below.
09-11-2023 07:47 AM
Hi mgchoi,
The same question you asked in https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BME680-BSEC-library-issue/m-p/81060#M156..., we can keep update there.