02-02-2024 08:50 AM
Hello,
On running basic_config_state.ino using config/FieldAir_HandSanitizer/FieldAir_HandSanitizer.h is giving below output.
BSEC outputs:
timestamp = 66121914
temperature = 36.19
humidity = 31.20
gas resistance = 282482.75
gas index = 7.00
BSEC outputs:
timestamp = 66122614
temperature = 36.33
humidity = 31.11
gas resistance = 296983.75
gas index = 8.00
BSEC outputs:
timestamp = 66123314
temperature = 36.38
humidity = 30.97
gas resistance = 314206.81
gas index = 9.00
We are using a custom board of ESP32 wrover with single BME688 on I2C.
I just want to know how does this example works?
As none of below case is occurring.
case BSEC_OUTPUT_GAS_ESTIMATE_1:
case BSEC_OUTPUT_GAS_ESTIMATE_2:
case BSEC_OUTPUT_GAS_ESTIMATE_3:
case BSEC_OUTPUT_GAS_ESTIMATE_4:
According to me it should print either of these "Field Air", "Hand sanitizer", "Undefined 3", "Undefined 4"
Any help will be appreciated.
Thank you.
02-03-2024 08:23 AM
Hi akshay_,
You can refer to basic_config_state.ino example completely, and run it again.