07-25-2021 07:47 PM
Hi,
I am trying to use the BME688 Andriod APP that was recently released. The App is able to connect to the BME 8x board via bluetooth. The SD card with the config file is present. (i.e it is logging data). but right after the app connects, i get this msg on the APP :
"Could not start sensor. response code: BSEC_CONFIG_MISSING"
if i look at the SD card and open a raw data file it creates (its flashed with the bme68x_demo_sample.ino.bin ) - i see this header.. as a appVersion of 0.7.4 not sure if this works with the App that i downloaed for the Andriod.
{
"configHeader": {
"dateCreated": "2020-10-20T08:54:10.804Z",
"appVersion": "0.7.4",
"boardType": "board_8",
"boardMode": "heater_profile_exploration",
"boardLayout": "grouped"
} ....
i have a *.bmeconfig in the SD card. so not sure what else is needed. again no documention etc. so its very tiny bit frustrating.
Thanks,
Karthik
Solved! Go to Solution.
08-06-2021 03:49 PM
Hello Minhwan,
the linked solution doesn't work for me. Location Services (and the relevant permissions) were already active for the app.
Best regards, Sebastian
08-07-2021 12:02 AM
08-07-2021 03:44 AM
Hello Minhwan,
thanks, it seems like the config files were the problem. When I'm using the ones you provided it does work, both using the App v1.1.2 and v1.1.3.
Since your configs were generated with the AI-Studio 1.5.5 (instead of the newest v1.6.0 that I tried to use), is this older version still anywhere available to download?
Thanks, Sebastian
08-09-2021 07:49 PM
Hello,
I tested today with latest version in website ( v1.6.0 AI studio + v1.5.0 dev kit )
And, I faced same issue with you.
The reason is probably not matched each version. I'm going to let our team know and back to you soon.
Currently, only latest version is available for website, regarding old version download, I can't upload since it over 50MB.
Please wait for this issue a little bit.
Thank you for your patience.
08-11-2021 03:01 PM
I was able to defeat this error by copying both files (2021_04_27_13_53_BoardConfiguration.bmeconfig and 2021_04_28_08_35_bsec_h2s_nonh2s_2_0_6_1 .config) to the SD card and reflashing the board with firmware bme688_x8board_v1-5-0.