11-11-2020 10:40 AM
Hello,
I'm using a BME680 sensor with a PIC32 microcontroller, and I require the Bosch BSEC to run on this PIC32. Is there a PIC32 library version compatible with XC32 compilers? It would be helpful if there was. Thank you.
Solved! Go to Solution.
11-11-2020 02:54 PM - edited 11-11-2020 02:55 PM
Hello Felixmev,
There was a previous topic to discuss BSEC library on PIC32, https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/how-to-get-IAQ-value-from-BME680-using-P...
You also could refer official BSEC library from https://www.bosch-sensortec.com/software-tools/software/bsec/
If your MCU part could be found in the supported list, please let me know your MCU part and compiler version, compiling options.
MCU detailed type: xxx
IDE version: xxx
Compiling options: xxx
12-09-2020 12:18 PM - edited 12-09-2020 12:19 PM
Hello,
My MCU does not appear in the list on the link. Also I saw the previous topic about BSEC library on PIC32, but unfortunately it's not useful for my application.
I'm using a PIC32MM0256GPM048 as mcu. IDE version: MPLAB X IDE v5.45. Compiling options: XC32 v2.50.
Thank you.
12-17-2020 04:21 AM - edited 12-17-2020 07:08 AM
Hello felixmev,
I saw there wa another community topic discussed BSEC for PIC32, could you download BSEC from the following link to check if it works well on you platfrom?
After your test, if this BSEC library didn't work on your platform, please provide the following sample project to us.
According your compiler and compiler option, could you help provide one example project in case there is any mismatch of the setting.
You could refer the following steps to create one example project:
1. create one empty project with the MCU type and setting of the customer;
2. export it or save it completely to a folder;
3. zip it and share to us.
03-15-2021 04:19 PM
Hello, I am currently facing the same issue, did you happen to reach any solution?