09-16-2022 08:38 PM
Hello. I have recently fould a software error in my TVC model rockets' software stemming from outdated pressure values from the bmp280 sensor. I made a function that would dynammically calculate the altitude so that I didn't half to change the calibration pressure every time we launched. Therefore, I haven't changed the calibrated pressure since the first launch. That function works fine, But I was wondering if outdated/wrong calibration pressure could cause delayed pressure readings.
Thanks.
09-19-2022 04:18 PM
Hi rocketMan,
According your description, do you mean your product is military product?
09-20-2022 11:08 PM
Hello!
To answer your question, nope, It's not. A few years ago I decided to learn about electronics and Arduino. This was really fun, but then I stumbled upon a YouTuber called BPS.space. He makes advanced model rockets and I thought I could do that. Two years later and I've made my own flight computer! This project has nothing to do with military hardware and it's only a fun engineering challenge. And that's where it ends.
10-21-2022 10:33 AM
Hi rocketMan,
According to your description, we did not understand what the problem you encountered was. Can you describe it again?