Hello! I'm currently reading in the sensor data in standalone mode using the following code: #include "Nicla_System.h" #include <ArduinoBLE.h> #include "Arduino.h" #include "Arduino_BHY2.h" Sensor temp(SENSOR_ID_TEMP); Sensor humid(SENSOR_ID_HUM); Sensor baro(SENSOR_ID_BARO); void setup() { Serial.begin(115200); while(!Serial); BHY2.begin(); temp.begin(); humid.begin(); baro.begin(); } void loop() { static auto printTime = millis(); // Update function should be continuously polled BHY2.update(); if (millis() - printTime >= 1000) { printTime = millis(); Serial.println(String("Temperature: ") + String(temp.value(),3) + String(" Pressure: ") + String(baro.value(),3) + String(" Humidity: ") + String(humid.value(),3)); } } While we are getting readings in COM7, they don't seem to be accurate. Here's a sample output: 18:07:14.424 -> Temperature: 27.010 Pressure: 1004.032 Humidity: 12.000 18:07:15.405 -> Temperature: 27.020 Pressure: 1004.024 Humidity: 12.000 The temperature in the room is measured to be 23 degrees celsius and the humidity is most definitely not 12%. Does anyone know how to calibrate teh sensor or add an offset? Thanks!
... View more
