About peter3099

I used build_flags =   -L .pio/libdeps/esp32/BSECSoftwareLibrary_ID6979/src/inc   -I .pio/libdeps/esp32/BSECSoftwareLibrary_ID6979/src/esp32   -libalgobsec   or build_flags =   -L '.pio/libdeps/esp32/BSECSoftwareLibrary_ID6979/src/inc'   -I '.pio/libdeps/esp32/BSECSoftwareLibrary_ID6979/src/esp32'   -libalgobsec   Keeps saying the same https://community.platformio.org/t/how-to-use-relative-paths-in-build-flags/9540/2 c:/users/pedro/.platformio/packages/toolchain-xtensa32/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld.exe: cannot find -libalgobsec collect2.exe: error: ld returned 1 exit status *** [.pio\build\esp32\firmware.elf] Error 1 Nobody has used this sensor with platform IO before?  I'm developing a multisensor board and having IAQ and eCO2 info is key for me. Thanks in advance   ... View more

FYI, I didn't knwo if the images uploaded correctly ... View more

Ok so libalgobsec.a is on    C:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979\src\esp32 and on src/inc I have the other files   Verbose Output   PS D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32> pio run -v Processing esp32 (platform: espressif32; board: esp32dev; framework: arduino; monitor_speed: 115200; upload_port: COM[3]; monitor_port: COM[3]; build_flags: -IC:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979\src\inc, -LC:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979\src\esp32, -lalgobsec; lib_deps: Adafruit GFX Library, Adafruit_ILI9341, XPT2046_Touchscreen, Wire, 1609, painlessMesh, OneButton, WiFi, TaskScheduler, Ticker, AsyncMqttClient, ESP Async WebServer, ArduinoJson, Adafruit NeoPixel, Ambimate) ------------------------------------------------------------------------------------------------------------------------------------------------------ CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html PLATFORM: Espressif 32 1.12.0 > Espressif ESP32 Dev Module HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 3.10004.200129 (1.0.4) - tool-esptoolpy 1.20600.0 (2.6.0) - toolchain-xtensa32 2.50200.80 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf Framework incompatible library D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit_ILI9341_ID2148 LDF Modes: Finder ~ chain, Compatibility ~ soft Platform incompatible library D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ESPAsyncTCP_ID305 Platform incompatible library D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ESPAsyncTCP_ID305@1.2.0 More details about "Library Compatibility Mode": https://docs.platformio.org/page/librarymanager/ldf.html#ldf-compat-mode Found 42 compatible libraries Warning! Circular dependencies detected between `D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit ILI9341_ID571` and `D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit GFX Library_ID13` Scanning dependencies... Warning: Ignored `ESPAsyncTCP` dependency for `painlessMesh` library Warning: Ignored `ESPAsyncTCP` dependency for `AsyncMqttClient` library Warning: Ignored `ESPAsyncTCP` dependency for `ESP Async WebServer` library Warning: Ignored `Hash` dependency for `ESP Async WebServer` library Warning! Circular dependencies detected between `D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit ILI9341_ID571` and `D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit GFX Library_ID13` Dependency Graph |-- <Adafruit GFX Library> 1.7.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit GFX Library_ID13) | |-- <Adafruit ILI9341> 1.5.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit ILI9341_ID571) | | |-- <Adafruit STMPE610> 1.1.2 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit STMPE610_ID377) | | | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) | | | |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) | | |-- <Adafruit TouchScreen> 1.0.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit TouchScreen_ID5430) | | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) |-- <XPT2046_Touchscreen> (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\XPT2046_Touchscreen_ID542) | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) |-- <CCS811> 10.0.0 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\CCS811_ID1609) | |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) |-- <painlessMesh> 1.4.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\painlessMesh_ID1269) | |-- <ArduinoJson> 6.15.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ArduinoJson_ID64) | |-- <TaskScheduler> 3.1.4 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\TaskScheduler_ID721) | |-- <AsyncTCP> 1.1.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\AsyncTCP_ID1826) | |-- <WiFi> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\WiFi) | |-- <FS> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\FS) | |-- <SPIFFS> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPIFFS) | | |-- <FS> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\FS) | |-- <Update> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Update) |-- <OneButton> (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\OneButton_ID1260) |-- <WiFi> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\WiFi) |-- <TaskScheduler> 3.1.4 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\TaskScheduler_ID721) |-- <Ticker> 1.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Ticker) |-- <AsyncMqttClient> 0.8.2 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\AsyncMqttClient_ID346) | |-- <AsyncTCP> 1.1.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\AsyncTCP_ID1826) |-- <ESP Async WebServer> 1.2.3 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ESP Async WebServer_ID306) | |-- <AsyncTCP> 1.1.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\AsyncTCP_ID1826) | |-- <FS> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\FS) | |-- <WiFi> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\WiFi) | |-- <ArduinoJson> 6.15.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ArduinoJson_ID64) |-- <ArduinoJson> 6.15.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\ArduinoJson_ID64) |-- <Adafruit NeoPixel> 1.3.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit NeoPixel_ID28) |-- <Ambimate> 1.0.0 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Ambimate_ID6454) | |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) |-- <BSEC Software Library> 1.5.1474 (C:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979) | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) | |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) |-- <Adafruit ILI9341> 1.5.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit ILI9341_ID571) | |-- <Adafruit STMPE610> 1.1.2 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit STMPE610_ID377) | | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) | | |-- <Wire> 1.0.1 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\Wire) | |-- <Adafruit TouchScreen> 1.0.5 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\Adafruit TouchScreen_ID5430) | |-- <SPI> 1.0 (C:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\libraries\SPI) |-- <AsyncTCP> 1.1.1 (D:\Ascough\XPS\SE\Projects\SymphonySense\Code\PlatformIO\SSv0.1 - ESP32\.pio\libdeps\esp32\AsyncTCP_ID1826) Building in release mode xtensa-esp32-elf-g++ -o .pio\build\esp32\firmware.elf -T esp32_out.ld -nostdlib -Wl,-static -u call_user_start_cpu0 -Wl,--undefined=uxTopUsedPriority -Wl,--gc-sections -Wl,-EL -T esp32.common.ld -T esp32.rom.ld -T esp32.peripherals.ld -T esp32.rom.libgcc.ld -T esp32.rom.spiram_incompatible_fns.ld -u ld_include_panic_highint_hdl -u __cxa_guard_dummy -u __cxx_fatal_exception .pio\build\esp32\src\main.cpp.o -L.pio\build\esp32 -LC:\Users\Pedro\.platformio\platforms\espressif32\builder\UsersPedro.platformiolibBSECSoftwareLibrary_ID6979srcesp32 -LC:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\tools\sdk\lib -LC:\Users\Pedro\.platformio\packages\framework-arduinoespressif32\tools\sdk\ld -Wl,--start-group .pio\build\esp32\lib49f\libSPI.a .pio\build\esp32\lib2a8\libWire.a ".pio\build\esp32\lib6f7\libAdafruit STMPE610_ID377.a" ".pio\build\esp32\lib6dd\libAdafruit TouchScreen_ID5430.a" ".pio\build\esp32\lib073\libAdafruit ILI9341_ID571.a" ".pio\build\esp32\lib282\libAdafruit GFX Library_ID13.a" .pio\build\esp32\libbd7\libXPT2046_Touchscreen_ID542.a .pio\build\esp32\lib320\libCCS811_ID1609.a .pio\build\esp32\libf86\libArduinoJson_ID64.a .pio\build\esp32\libb0a\libTaskScheduler_ID721.a .pio\build\esp32\lib648\libAsyncTCP_ID1826.a .pio\build\esp32\lib79a\libWiFi.a .pio\build\esp32\libc41\libFS.a .pio\build\esp32\libabe\libSPIFFS.a .pio\build\esp32\libef4\libUpdate.a .pio\build\esp32\lib5d6\libpainlessMesh_ID1269.a .pio\build\esp32\lib2b1\libOneButton_ID1260.a .pio\build\esp32\libf8d\libTicker.a .pio\build\esp32\lib1c3\libAsyncMqttClient_ID346.a ".pio\build\esp32\libb4a\libESP Async WebServer_ID306.a" ".pio\build\esp32\lib027\libAdafruit NeoPixel_ID28.a" .pio\build\esp32\libb23\libAmbimate_ID6454.a .pio\build\esp32\lib558\libBSECSoftwareLibrary_ID6979.a .pio\build\esp32\libFrameworkArduinoVariant.a .pio\build\esp32\libFrameworkArduino.a -lalgobsec -lgcc -lesp32 -lphy -lesp_http_client -lmbedtls -lrtc -lesp_http_server -lbtdm_app -lspiffs -lbootloader_support -lmdns -lnvs_flash -lfatfs -lpp -lnet80211 -ljsmn -lface_detection -llibsodium -lvfs -ldl_lib -llog -lfreertos -lcxx -lsmartconfig_ack -lxtensa-debug-module -lheap -ltcpip_adapter -lmqtt -lulp -lfd -lfb_gfx -lnghttp -lprotocomm -lsmartconfig -lm -lethernet -limage_util -lc_nano -lsoc -ltcp_transport -lc -lmicro-ecc -lface_recognition -ljson -lwpa_supplicant -lmesh -lesp_https_ota -lwpa2 -lexpat -llwip -lwear_levelling -lapp_update -ldriver -lbt -lespnow -lcoap -lasio -lnewlib -lconsole -lapp_trace -lesp32-camera -lhal -lprotobuf-c -lsdmmc -lcore -lpthread -lcoexist -lfreemodbus -lspi_flash -lesp-tls -lwpa -lwifi_provisioning -lwps -lesp_adc_cal -lesp_event -lopenssl -lesp_ringbuf -lfr -lstdc++ -Wl,--end-group c:/users/pedro/.platformio/packages/toolchain-xtensa32/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld.exe: cannot find -lalgobsec collect2.exe: error: ld returned 1 exit status *** [.pio\build\esp32\firmware.elf] Error 1       Do I need to put libalgobsec.a somewhere else?   Thanks for all the patience 🙂   ... View more

Thank for that, making some progress. I changed the name of the folder to one with no spaces build_flags =   -IC:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979\src\inc   -LC:\Users\Pedro\.platformio\lib\BSECSoftwareLibrary_ID6979\src\esp32   -lalgobsec   and I got Linking .pio\build\esp32\firmware.elf c:/users/pedro/.platformio/packages/toolchain-xtensa32/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld.exe: cannot find -lalgobsec collect2.exe: error: ld returned 1 exit status *** [.pio\build\esp32\firmware.elf] Error 1 I tried commenting lalgobsec line on the build   But if I do that I come back to the original error.   ... View more