Application board 3.0 suitable battery

[TheTinker]

Hi,

which battery could I use for the Application board 3.0? I haven't found the description of mounting the battery on the board. So I am a little confused.

Regards and thanks!

[BSTRobin]

Hi TheTinker,

You could use the battery like this.
battery holder: MOLEX - 0532540270
battery: https://item.taobao.com/item.htm?spm=a230r.1.14.58.55513d5byaYHXS&id=583314453069&ns=1&abbucket=10#d...

[TheTinker]

Hi BSTRobin,

thank you for the reply. This will help. But I haven't found any information about max. current on data sheet and where to connect the battery.

Thanks in advance if you could help.

Regards

[BSTRobin]

Hi TheTinker,

1: The schematic is not official release, you can download the user guide from below link:
https://www.bosch-sensortec.com/media/boschsensortec/downloads/software_tools/application_board_3_0/...

2: There is no documented description of the battery, but you can use the recommended battery.
battery holder: MOLEX - 0532540270
battery: https://item.taobao.com/item.htm?spm=a230r.1.14.58.55513d5byaYHXS&id=583314453069&ns=1&abbucket=10#d...

[Swingpro]

Could somoene refresh this answer please? The Molex part referenced is a header, not a battery holder, and the link provided for the battery is a website that doesn't appear to be a battery vendor, and is in Japanase(?). Could you provide a description of the battery in English?