10-26-2022 10:09 AM - edited 11-01-2022 08:45 AM
I would like to ask a question about the firmware of the BHI260AP.
I have a BMM150 and BMP390 connected to a BHI260AP as well as a Nicla Sense ME.
Is there a firmware file to use the PDR feature?
Also, is there a configuration file that can be built with the BHI260AP SDK?
----------------------------------------
I'm using a BHI260AP shuttle board and an Application board 3.0 now.
I found a firmware file for PDR in COINES/v2.7.0/examples/bhy2/firmware/BHI260AP_PDR and confirmed that it is available.
I want to use the pressure sensor BMP390 at the same time as the PDR, but I cannot get data from the pressure sensor when using the above firmware file. I confirmed that I can get the pressure sensor data if I use COINES/v2.7.0/examples/bhy2/firmware/BHI260AP/Bosch_Shuttle3_BHI260_aux_BMM150_BMP390_BME688.fw.
Please let me know if there is any published firmware for using both of the PDR and the pressure sensor.
Solved! Go to Solution.
11-01-2022 08:51 AM
Hi minom,
Firmware supported PDR has not been released publicly, so you need to contact the distributor to apply through offline channels if you design a project.
Currently, we release the firmware of Nicla Sense ME, not the SDK.
11-02-2022 12:25 AM
Hi BSTRobin,
Thank you for your replying. I will contact the distributor.