I'm using a BMA456 and i'm having trouble with the fifo_err flag in the ERR_REG ( 0x02 ) register.
The device is configured as follows:
I'm performing a test where i let the FIFO overflow but the flag is never set. The FIFO seems to be working fine and filling.
Am i missing some configurations?
I'm using a custom driver for space constraints but i based the logic on your example fifo_full_headerless_mode.
I suspect that the problem may be that i'm not initializing the ASIC but i'm following your example which doesn't initialize it either.
Thanks for the support.