01-23-2023 10:59 AM
Hi
I am use your sensor BME680 with ESP32 but i have any problems with the meditions beacouse i think that dont run correctly, i put the sensor in officeroom and when the offece room is free VOC,IAQ and SIAQ take high values, but when some people go inside the office room this variables take low values. My impression is that the sensor work the other way around, this is possible?
01-24-2023 10:56 AM
look at the graphics, when produce this peak aproximadly when go out the offic and the final of grapichs when it comes down, we go in the office
01-25-2023 04:08 PM
Hi Dennis12,
When you test the sensor data, how about the ventilation of the office?
01-26-2023 08:10 AM
when i tested the sensor 8h air conditioner was on and the 16h next off
02-17-2023 03:58 AM
Hi Dennis12,
Regarding the chart, there are the following questions:
The outdoor temperature is lower than the indoor temperature, right?
When the air conditioner is turned on, is there no door opened to exchange air with the room?
For each time period on the chart, can you explain the following status?
1. Is the air conditioner on or off?
2. Are people in the office or not?