Bosch Sensortec Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    BME688 gas classification working with devkit but not with single sensor

    BME688 gas classification working with devkit but not with single sensor

    dmalcorps
    Member

    Hello,

    I am using the bme688 devkit to gather data for 2 gas classes. After using ai-studio to generate the bsec config file, I am testing the gas classification with the example application provided under https://github.com/BoschSensortec/Bosch-BSEC2-Library, which works. But if I am trying to use the same configuration with one of our own sensors connected over i2c the classification does not work. I tried three different sensors but none showed the correct gas class. In fact the classification output does not change at all, regardless of the air around the sensor. I hardly believe that all three sensors are somehow defective, given that every other metric, be it temperature, humidity, raw gas resistence, does change according to changes in the air. Does a custom bsec config only works with the dev board? What could be the error?

    Kind regards,

    Dennis

    16 REPLIES 16

    BSTRobin
    Community Moderator
    Community Moderator

    Hi kd7eir,

    Currently the best way to tackle sensor aging is by including data from both boards(old and new sensors) for training.

    Prop4et
    Established Member

    So, if i didn't misunderstand what you are saying, this means that even if someone samples data with the dev kit and then proceeds  to train an algorithm, the resulting configuration works only with the devkit and not with other sensors connected to other MCUs?

    BSTRobin
    Community Moderator
    Community Moderator

    Hi Prop4et,

    Currently, you record data with dev kit, the sensor on dev kit run with the configuration file generated by BME AI-Studio will have better performance than other sensors.

    Looks like the training is not working at all on a single sensor. I was collecting the data from the single sensor getting the samples for about half of hour for normal area condition, after that with cofee and another time, as it was described in the video. After the raw data have been collected i have imported this file to Bosh AI studio, but looks like the cicles are considered only for the first speciment and the rest is with 0... for the first one it is 48 even though i was more than 1000 sampling collected for 2 hours. Is there way to configure the AI for one sensor or there is a limitation on it to be working only with your dev tool? 

    BSTRobin
    Community Moderator
    Community Moderator

    Hi Mila,

    The BME AI-Studio itself does not limit how many sensors are used to collect data, and when it is collected, as long as the imported data format meets the requirements. Detailed data format requirement, reference applicatoin note: https://www.bosch-sensortec.com/media/boschsensortec/downloads/application_notes_1/bst-bme688-an001....

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist